GB/T 14824-2008
Replaced
T/CCMA 0129-2022
Active
Group standards
T/CCMA 0129-2022 General technical requirements and test methods for electric motor controllers for off-road vehicles
T/CCMA 0129-2022 General technical requirements and test methods for electric motor controllers for off-road vehicles
Price:
$ 37.00
Basic Information
Standard Code:
T/CCMA 0129-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Control appliances
ICS Name:
Integrated switch devices and controllers
Publish Date:
2022-04-13
Implement Date:
2022-07-13
Pages:
28 pages
Scope
This document specifies the working and testing environmental conditions, technical requirements, testing methods, inspection rules, as well as marking, packaging, transportation, and storage for motor controllers used in off-road electric vehicles.
This document is applicable to motor controllers used in electric vehicles operating in off-road areas, including sightseeing vehicles, industrial vehicles, aerial work platforms, golf carts, industrial tractors, sanitation vehicles, and other electric vehicles. Other electric vehicles may refer to and use this document for reference.
This document is applicable to motor controllers for off-road electric vehicles with a rated input DC voltage of less than 150 V and an output power peak of less than 40 kW.
Development Information
Referenced Standards
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB/T 755-2019 Rotating electrical machines—Rating and performance
GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17799.2-2003 Electromagnetic compatibility—Generic standards—Immunity for industrial environments
GB/T 17799.2-2023 Electromagnetic compatibility—Generic standards—Part 2: Immunity standard for industrial environments
GB/T 21268-2014 General technical conditions for garden patrol minibus
GB/T 27544-2011 Industrial trucks—Electrical requirements
GB/T 30031-2013 Industrial trucks—Electromagnetic compatibility
GB/T 30031-2021 Industrial trucks—Electromagnetic compatibility
JB/T 3300-2010 Balanced-weight forklift test method for complete machine
JB/T 9229-2013 Scissor Lift Platform
JB/T 12483-2015 Arm-mounted lifting work platform
GB 2894-2025 Safety colours and safety signs
GB/T 755-2025 Rotating electrical machines—Rating and performance
Related Standards
GB/Z 25842.1-2010
Active
GB/Z 25842.1-2010 Low-voltage switchgear and controlgear—Overcurrent protective devices—Part 1:Application of short-circuit ratings
GB/T 18858.1-2012
Active
GB/T 18858.1-2012 Low-voltage switchgear and controlgear—Controller-device interface(CDI)—Part 1:General rules
GB/T 18858.2-2012
Active
GB/T 18858.2-2012 Low-Voltage switchgear and controlgear—Controller-device interfaces(CDI)—Part 2:Actuator sensor interface(AS-i)
GB/T 18858.3-2012
Active
GB/T 18858.3-2012 Low-voltage switchgear and controlgear—Controller-device interface(CDI)—Part 3:DeviceNet
GB/Z 25842.2-2012
Active