GB/T 13862-1992
Abolished
GB/T 15092.3-2023
Active
National standards
GB/T 15092.3-2023 Switches for appliances—Part 2-5:Particular requirements for change-over selectors
GB/T 15092.3-2023 Switches for appliances—Part 2-5:Particular requirements for change-over selectors
Price:
$ 50
Basic Information
Standard Code:
GB/T 15092.3-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Switch
Publish Date:
2023-05-23
Implement Date:
2023-12-01
Pages:
10 pages
Scope
This part of GB/T 15092 specifies the technical requirements for appliance switches, including marking and documentation, protection against electric shock, structural requirements, mechanical requirements, electrical performance, etc.
This part applies to appliance switches (hereinafter referred to as switches) used to operate or control household or similar electrical appliances and other equipment, with a rated voltage not exceeding 480V and a rated current not exceeding 63A.
Such switches are operated by humans through actuators, indirectly, or by activating sensors. The signal transmission between the actuator or sensor and the switch can be optical, acoustic, thermal, electrical, or other related methods, and may also include remote control devices.
This part applies to switches that provide additional control functions, which are subject to the electronic circuits and devices provided by the switch and are necessary for intentional and/or correct operation of the switch.
This part applies to the evaluation of switches and switch functions required for circuits.
Replace with:
This document applies to mechanical or electronic change-over selectors used on appliances and equipment for household and similar purposes, driven or controlled by human hands, feet, or other bodily movements. The rated voltage of the change-over selector shall not exceed 480 V, and the rated current shall not exceed 63 A.
The change-over selector shall be operated by humans through actuators, or indirectly by activating sensor devices. The actuator or sensor device may be physically or electrically integrated with the switch or configured separately, and may also include signal transmission between the actuator or sensor and the switch, such as electrical, optical, acoustic, or thermal signal transmission.
Change-over selectors with additional control functions subject to the control of the switch function fall within the scope of this doc
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB 14536.4-1996 Automatic electrical controls for household and similar use Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
GB/T 14536.4-2008 Automatic electrical controls for household and similar use—Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
GB 14536.5-1996 Automatic electrical controls for household and similar use Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
GB/T 14536.5-2008 Automatic electrical controls for household and similar use—Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
GB 14536.6-1996 Automatic electrical controls for household and similar use Particular requirements for automatic electrical burner control systems
GB/T 14536.6-2008 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical burner control systems
GB/T 14536.6-2022 Automatic electrical controls—Part 6:Particular requirements for automatic electrical burner control systems
GB 14536.7-1996 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB/T 14536.7-2010 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB/T 14536.7-2024 Automatic electrical controls—Part 7:Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB 14536.8-1996 Automatic electrical controls for household and similar use—Particular requirements for timers and time switches
GB/T 14536.8-2010 Automatic electrical controls for household and similar use—Particular requirements for timers and time switches
GB 14536.9-1996 Automatic electrical controls for household and similar use—Particular requirements for electrically operated water valves, including mechanical requirements
GB/T 14536.9-2008 Automatic electrical controls for household and similar use—Particular requirements for electrically operated water valves,including mechanical requirements
GB 14536.10-1996 Automatic electrical controls for household and similar use—Particular requirements for temperature sensing controls
GB/T 14536.10-2008 Automatic electrical controls for household and similar use—Particular requirements for temperature sensing controls
GB/T 14536.10-2022 Automatic electrical controls—Part 10:Particular requirements for temperature sensing control
GB 14536.11-1996 Automatic electrical controls for household and similar use—Particular requirements for electrically operated motor starting relays
GB/T 14536.11-2008 Automatic electrical controls for household and similar use—Particular requirements for motor-starting relays
GB 14536.12-1996 Automatic electrical controls for household and similar use—Particular requirements for energy regulators
GB/T 14536.12-2010 Automatic electrical controls for household and similar use—Particular requirements for energy regulators
GB/T 14536.12-2024 Automatic electrical controls—Part 12:Particular requirements for energy regulators
GB 14536.13-1996 Automatic electrical controls for household and similar use Particular requirements for electrically operated door locks
GB/T 14536.13-2008 Automatic electrical controls for household and similar use—Particular requirements for electrically operated door locks
GB/T 14536.13-2022 Automatic electrical controls—Part 13:Particular requirements for electrically operated door locks
GB 14536.14-1998 Automatic electrical controls for household and similar use—Particular requirements for household washing machine microcomputer controller
GB 14536.15-1999 Automatic electrical controls for household and similar use—Particular requirements for humidity sensing controls
GB/T 14536.15-2008 Automatic electrical controls for household and similar use—Particular requirements for humidity sensing controls
GB/T 14536.15-2022 Automatic electrical controls—Part 15:Particular requirements for humidity sensing control
GB 14536.16-2000 Automatic electrical controls for household and similar use particular requirements for electric actuators
GB/T 14536.16-2013 Automatic electrical controls for household and similar use—Particular requirements for electric actuators
GB/T 14536.17-2005 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications
GB/T 14536.18-2006 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical water level controls of the float type for household and similar applications
GB/T 14536.19-2006 Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves, including mechanical requirements
GB/T 14536.19-2017 Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves,including mechanical requirements
GB/T 14536.20-2008 Automatic electrical controls for household and similar use—Particular requirements for automatic electric water and air flow sensing controls,including mechanical requirements
GB/T 14536.21-2008 Automatic electrical controls for household and similar use—Particular requirements for electrically operated oil valves,including mechanical requirements
GB/T 15092.101-2020 Switches for appliances—Part 1-1:Requirements for mechanical switches
GB/T 15092.102-2020 Switches for appliances—Part 1-2:Requirements for electronic switches
GB/T 16842-2016 Protection of persons and equipment by enclosures—Probe for verification
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.3-2016 Insulation coordination for equipment within low-voltage systems— Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 17196-2017 Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.2-1999 Electromagnetic compatibility Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A
GB/T 17625.2-2007 Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
GB/Z 17625.3-2000 Electromagnetic compatibility—Limits—Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.8-1998 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test
GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test
GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17743-2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 15092.1-2020 Switches for appliances—Part 1:General requirements
Adopt standards
IEC 61058-2-5:2018
Related Standards
GB/T 14280-1993
Abolished
GB/T 14280-1993 Thermal time delay switch, Generic specification of
GB/T 14281-1993
Abolished
GB/T 14281-1993 Thermostatic switch, Generic specification of
GB/T 14810-1993
Replaced
GB/T 14810-1993 AC high voltage switches for rated voltages of 110kV and above
GB 15092.2-1994
Replaced
GB 15092.2-1994 Switches for appliances—Part 2:Particular requirements for cord switches
GB 15092.3-1998
Replaced