Standards

CJ/T 339-2010 Abolished

CJ/T 339-2010 General technical requirements of bus rapid transit(BRT)

This standard specifies the terms and definitions, abbreviations, classifications, requirements, and test methods for buses used in bus rapid transit (BRT).
This standard applies to BRT buses with a length of more than 10 m and less than or equal to 18 m.

Publish Date: 2010-12-10

CJ/T 358-2010 Abolished

CJ/T 358-2010 High density polyethylene(HDPE) sewer pipes for trenchless installation

This standard specifies the materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of high-density polyethylene drainage pipes used for trenchless installation.
This standard applies to high-density polyethylene pipes used for non-pressurized urban drainage, where the temperature of the transported medium does not exceed 40 °C and the pipes are installed using trenchless methods.

Publish Date: 2010-12-10

CJ/T 360-2010 Abolished

CJ/T 360-2010 Technical requirements of gas monitoring for sewer and septic tanks

This standard specifies the system components for gas monitoring in sewers and septic tanks, the technical requirements for system software, the technical requirements for monitoring terminals, test methods, inspection rules, etc.
This standard is applicable to gas monitoring in sewers and septic tanks. It can be used as a reference for wastewater pump stations, wastewater treatment plants, and landfills.

Publish Date: 2010-12-10

CJ/T 348-2010 Abolished

CJ/T 348-2010 Digital community management and services—Classification and codes

This standard specifies the classification of digital community management and services, coding rules, codes, management and service type selection, and extended requirements, etc.
This standard is applicable to the collection, storage, processing, exchange of data related to digital community management and services, and the development and application of digital community information systems.

Publish Date: 2010-10-21

CJ/T 349-2010 Abolished

CJ/T 349-2010 Digital community management and services—Rules for grid division and coding

This standard specifies the principles of grid division, coding rules, and data requirements for digital community management and services.
This standard is applicable to the professional grid division of digital community management and services.

Publish Date: 2010-10-21

CJ/T 350-2010 Abolished

CJ/T 350-2010 General specifications for battery electric bus

This standard specifies the terms and definitions of electric buses, model compilation, basic requirements, vehicle-specific chassis, body, vehicle management systems and safety facilities, test methods, inspection rules, marking, packaging, transportation, and storage.
This standard applies to electric buses with a length of more than or equal to 7 m and less than or equal to 18 m.

Publish Date: 2010-10-21

CJ/T 346-2010 Abolished

CJ/T 346-2010 Automatic shut-off valves for gas-burning appliances

This standard specifies the terms and definitions, classification, structure and materials, requirements, test methods, marking, installation and operation instructions, inspection rules, packaging, transportation, and storage of automatic shut-off valves for household gas appliances (hereinafter referred to as valves).
This standard applies to valves used on appliances that utilize urban gas specified in GB/T 13611, with a maximum working pressure of less than 10kPa and a nominal diameter not exceeding DN50.
This standard applies to valves operated directly or indirectly by electromagnetic, electric, or mechanical means.
This standard applies to fluid-driven control valves (e.g., gas, liquid).
This standard applies to valves equipped with switches indicating the closed position.

Publish Date: 2010-08-03

CJ/T 347-2010 Abolished

CJ/T 347-2010 Household combustible gas alarms and sensor

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage for household gas alarms and sensors.
This standard applies to household gas alarms and sensors used to detect gas leaks and carbon monoxide produced by incomplete gas combustion.

Publish Date: 2010-08-03

CJ 343-2010 Abolished

CJ 343-2010 Wastewater quality standards for discharge to municipal sewers

This standard specifies the water quality requirements, sampling, and monitoring for wastewater discharged into urban sewers.
This standard applies to the water quality of wastewater discharged by drainage users into urban sewers.

Publish Date: 2010-07-29

CJ/T 197-2010 Abolished

CJ/T 197-2010 Stainless steel corrugated tubes for the connection of gas appliances

This standard specifies the product classification, specifications, and model numbering, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of stainless steel corrugated hoses for gas appliance connections (hereinafter referred to as hoses).
This standard applies to hoses used for connecting gas stoves, gas water heaters, gas meters, and other gas appliances to gas pipelines, with a nominal size of DN ≤ N32 and a nominal pressure of PN ≤ 0.01 MPa.

Publish Date: 2010-05-18

CJ/T 322-2010 Abolished

CJ/T 322-2010 Ozone generator for water and waste water treatment

This standard specifies the classification and specifications, structure and materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of ozone generators used in water treatment.
This standard applies to ozone generators used for domestic drinking water, recycled water, and wastewater treatment. Ozone generators used in applications such as chemical oxidation, paper bleaching, and food industry disinfection and sterilization can be implemented in accordance with this standard.

Publish Date: 2010-01-14

CJ/T 317-2009 Abolished

CJ/T 317-2009 Polyethylene pipes and fittings for ground source heat pump system

This standard specifies the definitions, materials, product specifications, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of heat exchange pipes (referred to as heat exchange pipes) and fittings for ground source heat pump systems.
This standard applies to polyethylene pipes and fittings used for heat exchange in ground source heat pump systems.

Publish Date: 2009-12-10