Current Category: CN-TSG - Special Equipment Standards
本规则适用于《特种设备目录》范围内电梯的维护保养(以下简称维保)工作
This rule applies to the safety and energy-saving management of special equipment within the scope of the "Special Equipment Catalogue".
This regulation applies to pressure vessels defined in the Special Equipment Catalogue that meet the following conditions: (1) working pressure greater than or equal to 0.1 MPa (Note 1-2); (2) volume greater than or equal to 0.03 m3 and an inner diameter (for non-circular sections, the maximum geometric dimension of the inner boundary) greater than or equal to 150 mm (Note 1-3); (3) the medium contained is gas, liquefied gas, or a liquid with a maximum working temperature equal to or greater than its standard boiling point (Note 1-4). This regulation does not apply to the following vessels: (1) mobile pressure vessels, gas cylinders, and oxygen chambers; (2) military equipment, nuclear facilities, aerospace vehicles, railway locomotives, offshore facilities, and ships, as well as pressure vessels used in underground mines; (3) containers with a normal operating working pressure less than 0.1 MPa (including those connected to the atmosphere that need to withstand instantaneous pressures equal to or greater than 0.1 MPa during feeding or discharging); (4) pressurized chambers integrated as a whole or as components in rotating or reciprocating mechanical equipment (such as pump housings, compressor housings, turbine housings, hydraulic cylinders, papermaking rollers, etc.); (5) plate heat exchangers, spiral plate heat exchangers, air-cooled heat exchangers, and cooling fin tubes; (6) steam heating coils in atmospheric pressure vessels and tubular heating furnaces in process equipment; (7) fully enclosed switchgear dedicated to the power industry (such as capacitor pressure vessels); (8) tire vulcanizers and pressurized rubber molds used in the rubber industry; (9) unreinforced plastic pressure vessels.
This regulation applies to medical oxygen chambers and high-pressure chambers within the scope specified in the "Special Equipment Catalogue"
本规则适用于《特种设备安全监察条例》范围内的在用固定式压力容器、移动式压力容器和医用氧舱的定期检验,但是不包括气瓶
This regulation applies to mobile pressure vessels that meet the following conditions simultaneously: (1) having the function of loading and unloading media, and participating in railway, road, or waterway transportation; (2) the working pressure of the tank body being equal to or greater than 0.1MPa, and the nominal working pressure of the gas cylinder being equal to or greater than 0.2MPa; (3) the tank body capacity being equal to or greater than 450L, and the gas cylinder volume being equal to or greater than 1000L; (4) the media loaded being gases and liquids with a maximum working temperature equal to or greater than their standard boiling point. The mobile pressure vessels covered by this regulation, in addition to the tank body or gas cylinder, pipelines, safety accessories, and loading and unloading accessories, also include running devices or frames. This regulation stipulates the basic safety requirements for mobile pressure vessels. Technical standards and management systems related to mobile pressure vessels shall not be lower than the requirements of this regulation.
第一条 为规范特种设备型式试验机构的核准工作，根据《特种设备安全监察条 例》、《特种设备检验检测机构管理规定》，制定本规则。 本规则适用于《特种设备检验检测机构管理规定》所规定的特种设备型式试验机 构的核准。 第二条 核准分为首次核准、增项核准、换证核准。 第三条 特种设备型式试验机构经过核准，获得《特种设备检验检测核准证(型 式试验)》(以下简称《核准证》)方可承担核准项目范围内的型式试验工作。 特种设备型式试验核准项目见附件A。 第四条 特种设备型式试验机构及其检验检测人员、试验人员、专业技术人员不 得从事特种设备的生产、销售以及影响其独立性和公正性的服务，不得以其名义推荐 或者监制、监销特种设备。 第五条 国家质量监督检验检疫总局(以下简称国家质检总局)为特种设备型式 试验机构的核准机关(以下简称核准机关)。 型式试验机构的没置，应当以充分发挥区域资源或者行业优势、合理布局、规模 化为原则
本规程适用于《条例》所规定特种设备使用的爆破片装置。本规程规定了爆破片装置的材料、设计、制造、检验、安装、使用等过程以及制造许可、型式试验、监督检验工作的基本安全要求。相应技术标准、管理制度等的有关规定不得低于本规程的要求
本细则适用于从事《特种设备安全监察条例》中规定的锅炉、压力容器(含气瓶,下同)、压力管道(以下统称为承压类设备)和电梯、起重机械、客运索道、大型游乐设施、场(厂)内专用机动车辆(以下统称为机电类设备)焊接操作人员(以下简称焊工)的考核
In order to standardize the regular inspection of public pipelines, these rules are formulated in accordance with the "Regulations on the Safety Supervision of Special Equipment", the "Decision of the State Council on the Administration of Administrative Licenses for Administrative Examination and Approval Items that Need to be Retained" and the "Regulations on the Safety Management and Supervision of Pressure Pipelines". These rules apply to the regular inspection of public pipelines as stipulated in the "Regulations on the Safety Supervision of Special Equipment" and the "Regulations on the Safety Management and Supervision of Pressure Pipelines".
This regulation applies to process devices, auxiliary devices, and industrial pipelines (hereinafter referred to as pipelines) belonging to public utilities within the boundaries that meet the following conditions simultaneously: (1) The maximum working pressure is greater than or equal to 0.1 MPa (gauge pressure, hereinafter the same); (2) The nominal diameter (Note 1) is greater than 25 mm; (3) The medium transported is gas, steam, liquefied gas, liquid with a maximum working temperature higher than or equal to its standard boiling point, or flammable, explosive, toxic, or corrosive liquids. The scope of pipelines applicable to this regulation is as follows: (1) Pipeline components, including pipeline components (Note 2) and pipeline supports (Note 3); (2) Connection joints between pipeline components, and the first connection joint (welds, flanges) between pipelines and equipment or devices.
为了规范客运索道设计文件鉴定工作，保证客运索道的安全性能，根据《特种设备安全监察条例》，制定本规则。 本规则所称的客运索道设计文件鉴定，是指对客运索道设计中的安全性能是否符合国家质量监督检验检疫总局(以下简称国家质检总局)特种设备安全技术规范有关规定的审查，包括总体工艺和主要设备设计文件的鉴定