GB/T 21717-2008
Replaced
National standards
GB/T 21717-2008 Technical specification about the type parameter and performance of small hydraulic turbines
GB/T 21717-2008 Technical specification about the type parameter and performance of small hydraulic turbines
Basic Information
Standard Code:
GB/T 21717-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nHydraulic turbines and their auxiliary equipment
ICS Name:
Hydraulic engineering
Publish Date:
2008-05-04
Implement Date:
2008-07-01
Pages:
15 pages
Scope
This standard specifies the relevant terms and definitions, type parameters, and performance guarantees of small hydropower turbines, as well as reliability and product quality assurance. It also sets requirements for the scope of supply, inspection and acceptance, and technical documents to be provided by the manufacturer. This standard applies to small hydropower turbines with a unit power of between 500 kW and 10,000 kW, and a runner diameter of less than 3.3 m. Turbines with a runner diameter or unit power exceeding the above conditions shall be implemented in accordance with GB/T 15468. Turbines with a power less than the above capacity may refer to this standard for implementation.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 15468-2006 Fundamental technical requirements for hydraulic turbines
GB/T 2900.45-1996 Electrotechnical terminology—Hydraulic turbine, storage pump and pump-turbine
GB/T 2900.45-2006 Electrotechnical terminology—Hydroelectric power plant machinery
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 3323-2005 Radiographic examination of fusion welded joints in metallic materials
GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X-and gamma-ray techniques with film
GB/T 3323.2-2019 Non-destructive testing of welds—Radiographic testing—Part 2:X-and gamma-ray techniques with digital detectors
GB/T 6402-1991 Steel forgings—Method for ultrasonic examination
GB/T 6402-2008 Steel forgings—Method for ultrasonic testing
GB/T 6402-2024 Method for ultrasonic testing of steel forgings
GB/T 7233-1987 Methods for ultrasonic testing and for specifying quality levels of steel castings
GB/T 7233.1-2009 Steel castings—Ultrasonic examination—Part 1:Steel castings for general purposes
GB/T 7233.1-2023 Steel castings—Ultrasonic testing—Part 1:Steel castings for general purposes
GB/T 7233.2-2010 Steel castings—Ultrasonic examination—Part 2:Steel castings for highly stressed components
GB/T 7233.2-2023 Steel castings—Ultrasonic testing—Part 2:Steel castings for highly stressed components
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB/T 10969-1996 Specifications for water passage components of hydraulic turbines
GB/T 10969-2008 Specification for water passage components of hydraulic turbines,storage pumps and pump-turbines
GB 11120-1989 Turbine oils L-TSA
GB 11120-2011 Lubricating oils for turbines
GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 11345-2013 Non-destructive testing of welds—Ultrasonic testing—Techniques,testing levels,and assessment
GB/T 11345-2023 Non-destructive testing of welds—Ultrasonic testing—Techniques, testing levels and assessment
GB/T 11805-1999 Basic specifications of automatic control components(devices) and their related system for hydroturbine-generating sets
GB/T 11805-2008 Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets
GB/T 11805-2019 General specifications of automatic control components(devices)and their related system for hydroturbine-generating sets
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15469.1-2008 Hydraulic turbines,storage pumps and pump-turbines—Cavitation pitting evaluation—Part 1:Cavitation pitting evaluation in reaction turbines
GB/T 15469.2-2007 Hydraulic turbines, storage pumps and pump-turbines—Cavitation pitting evaluation—Part 2:Cavitation pitting evaluation in storage pumps and pump-turbines
GB/T 19184-2003 Cavitation pitting evaluation in Petton turbines
DL/T 443-2016 Guidelines for factory inspection of water turbine generator sets and their auxiliary equipment
DL/T 507-2014 DL/T 507-2014 Guidelines for Startup Test of Hydropower Generator Sets
DL/T 710-2018 DL/T 710-2018 Hydro Turbine Generator Set Operating Regulations
JB/T 1270-2014 Technical Conditions for Forged Shafts of Hydraulic Turbines and Hydraulic Generators
JB/T 6752-2013 Standard Procedures for Static Balance Test of Small and Medium Size Water Turbine Wheel
DL/T 507-2002 DL/T 507-2002 Specification for Start-up Test of Hydropower Generator Sets
JB/T 1270-2002 Water turbine, water turbine generator shaft forgings technical specification
JB/T 6752-1993 JB/T 6752-1993 Standard for Static Balance Test of Small and Medium Size Water Turbine Wheel
JB/T 10384-2002 Small and medium-sized water turbine flow components cast steel parts
JB/T 8660-1997 Specifications for Packaging, Transportation, and Storage of Hydropower Units
\nDL 443-1991 General Provisions for Factory Inspection of Hydroelectric Generator Sets
DL/T 710-1999 Code of operation for hydraulic turbines
Related Standards
GB/T 14627-1993
Replaced
GB/T 15468-1995
Replaced
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15469-1995
Replaced
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15613-1995
Replaced
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 16166-1996
Replaced
GB/T 16166-1996 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
GB/T 10969-1996
Replaced