GB/T 3317-1982
Replaced
GB/T 34575-2017
Replaced
National standards
GB/T 34575-2017 Auxiliary convertor for electric locomotive
GB/T 34575-2017 Auxiliary convertor for electric locomotive
Basic Information
Standard Code:
GB/T 34575-2017
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Traction electrical equipment
ICS Name:
Electric traction equipment
Publish Date:
2017-09-29
Implement Date:
2018-04-01
Pages:
14 pages
Scope
This standard specifies the operating conditions, main parameters, performance requirements, inspection methods, inspection rules, marking, packaging, transportation, and storage of auxiliary converters for electric locomotives. This standard applies to auxiliary converters used on electric locomotives.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 20626.1-2006 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements
GB/T 21413.1-2008 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules
GB/T 25119-2010 Railway applications—Electronic equipments used on rail vehicles
GB/T 25122.1-2010 Railway applications—Power convertors installed on board rolling stock—Part 1:Characteristics and test methods
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 1402-2010 Railway applications—Supply voltages of traction systems
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB/T 21414-2008 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21414-2021 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21562-2008 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS)
GB/T 21562.2-2015 Railway applications—Specification and demonstration ofreliability,availability,maintainability and safety(RAMS)—Part 2:Guide to the application for safety
GB/T 21562.3-2015 Railway applications—Specification and demonstration of reliability,availability,maintainability and safety (RAMS)—Part 3:Guide to the application for rolling stock RAM
GB/T 21563-2008 Railway applications—Rolling stock equipment—Shock and vibration tests
GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests
GB/T 24338.4-2009 Railway applications—Electromagnetic compatibility—Part 3-2:Rolling stock—Apparatus
GB/T 24338.4-2018 Railway applications—Electromagnetic compatibility—Part 3-2:Rolling stock—Apparatus
GB/T 25343.1-2010 Railway applications—Welding of railway vehicles and components—Part 1:General
GB/T 25343.2-2010 Railway applications—Welding of railway vehicles and components—Part 2:Quality requirements and certification of welding manufacturer
GB/T 25343.3-2010 Railway applications—Welding of railway vehicles and components—Part 3:Design requirements
GB/T 25343.4-2010 Railway applications—Welding of railway vehicles and components—Part 4:Production requirements
GB/T 25343.5-2010 Railway applications—Welding of railway vehicles and components—Part 5:Inspection,testing and documentation
GB/T 34571-2017 Railway applications—Rules for installation of cabling on rolling stock
GB/T 34571-2024 Railway applications—Rules for installation of cabling on rolling stock
GB 2894-2025 Safety colours and safety signs
GB/T 1402-2025 Railway applications—Supply voltages of traction systems
GB/T 25343.2-2026 Railway applications—Welding of rolling stock and components— Part 2:Basic requirements
Related Standards
GB/T 3318-1982
Replaced
GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction
GB/T 6927-1986
Abolished
GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems
GB 1402-1998
Replaced
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 3319-1998
Replaced
GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units
GB 5914.1-2000
Replaced