GB/T 1685-1982
Replaced
GB/T 8656-2018
Active
National standards
GB/T 8656-2018 Emulsion-and solution-polymerized styrene-butadiene rubber(SBR)—Evaluation procedures
GB/T 8656-2018 Emulsion-and solution-polymerized styrene-butadiene rubber(SBR)—Evaluation procedures
Price:
$ 75
Basic Information
Standard Code:
GB/T 8656-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Synthetic rubber
ICS Name:
Rubber
Publish Date:
2018-12-28
Implement Date:
2019-11-01
Pages:
21 pages
Scope
This standard specifies:
——The physical and chemical test methods for raw rubber;
——The standard materials, standard test formulations, equipment, and operating procedures used to evaluate the vulcanization characteristics of emulsions and solution-polymerized styrene-butadiene rubber (SBR) (including oil-filled rubber).
This standard applies to the rubbers listed in Table 1, which are typically used in the form of vulcanized rubber.
Development Information
Replace the following standards
Referenced Standards
ASTM D 3185
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 1232.1-2000 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity
GB/T 1232.1-2016 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity
GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 4498.1-2013 Rubber—Determination of ash—Part 1:Muffle furnace method
GB/T 6038-1993 Rubber test mixes—Preparation, mixing and vulcanization—Equipment and procedures
GB/T 6038-2006 Rubber test mixes—Preparation,mixing and vulcanization—Equipment and procedures
GB/T 9869-1997 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter
GB/T 9869-2014 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter
GB/T 15340-1994 Rubber, raw, natural and synthetic Sampling and further preparative procedures
GB/T 15340-2008 Rubber, raw natural and raw synthetic—Sampling and further preparative procedures
GB/T 24131.1-2018 Rubber,raw—Determination of volatile matter content—Part 1:Hot-mill method and oven method
GB/T 24131.2-2017 Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit
GB/T 25268-2010 Rubber—Guide to the use of curemeters
GB/T 15340-2025 Rubber,raw natural and raw synthetic—Sampling and further preparative procedures
GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 4498.1-2025 Rubber—Determination of ash—Part 1:Muffle furnace method
GB/T 9869.1-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 1:Introduction
GB/T 9869.2-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 2:Oscillating disc curemeter
GB/T 9869.3-2025 Rubber—Measurement of vulcanization characteristics usingcuremeters—Part 3:Rotorless curemeter
Adopt standards
ISO 2322:2014
Related Standards
GB/T 3515-1983
Replaced
GB/T 3515-1983 Rubber, vulcanized—determination of carbon black content—pyrolytic method
GB/T 4497-1984
Replaced
GB/T 4497-1984 Vulcanized rubber—Determination of total sulphur content—Oxygen combustion flask method
GB/T 6030-1985
Replaced
GB/T 6030-1985 Vulcanized rubber—Determination of carbon black dispersion—Micrographic method
GB 5577-1985
Replaced
GB 5577-1985 Codification of types for synthetic rubbers
GB/T 1688-1986
Replaced