YY 9706.264-2022
Active
Industry standards-Medicine
YY 9706.264-2022 Medical electrical equipment—Part 2-64:Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment
YY 9706.264-2022 Medical electrical equipment—Part 2-64:Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment
Basic Information
Standard Code:
YY 9706.264-2022
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Medical radiation equipment
ICS Name:
-
Publish Date:
2022-05-18
Implement Date:
2025-06-01
Publisher:
国家药品监督管理局
Technical Committee:
国家药品监督管理局全国医用电器标准化技术委员会放射治疗、核医学和放射剂量学设备分技术委员会(SAC/TC 10/SC 3)
Pages:
48 pages
Scope
GB 9706的本部分规定了ME设备和ME系统的基本安全和基本性能的通用要求。
本部分适用于医用电气设备和医用电气系统(以下简称ME设备和ME系统)。
如果一章或一条明确指出仅适用于ME设备或ME系统,标题和 章或条的正文会说明。如果不是这种情况,与此相关的章或条同时适用于ME设备和ME系统。
除7.2.13和8.4.1外,本部分范围内的ME设备或ME系统的预期生理效应所导致的危险(源)在本部分中没有具体要求。
本文件规定了用于治疗患者的轻离子束医用电气设备(以下简称ME设备)的基本安全和基本性能专用要求。
若某一章或条特有地旨在仅适用于ME设备或ME系统,则该章或条相关内容将予以说明。若不是这种情况,则该章或条适用于ME设备和ME系统。
本文件包含了型式试验和现场试验,分别适用于轻离子束ME设备的制造商和某些安装方面,该设备:
——预期用于人类放射治疗的医疗实践,包括那些操作参数能够由可编程电子子系统(PESS)自动控制选择和显示的,
——正常使用中,输送单核能为10 MeV/n~500 MeV/n的轻离子辐射束的,
和预期
——正常使用时,在获得相应许可人员或有资质人员授权下,由对特定医疗应用具有所需技能的操作者操作,用以达到规定的临床目的,并与使用说明书中的建议保持一致,
——需要有资质人员定期的性能质量保证和校准检查。
注1: 在本文件中,所有提及的安装指的是在责任方场地中安装。
注2: 在本文件中,所有提及的吸收剂量指的是水中吸收剂量。
注3: X-射线图像引导相关的信息见YY 9706.268。
注4: GB/T 18987给出了ME设备的运动、刻度标记、零位和运动正方向的指导意见(见201.7.4.101)。
Development Information
Same series standard
YY 9706.258-2022 Medical electrical equipment—Part 2-58:Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
YY 9706.268-2022 Medical electrical equipment—Part 2-68:Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators,light ion beam therapy equipment and radionuclide beam therapy equipment
YY 9706.274-2022 Medical electrical equipment—Part 2-74:Particular requirements for basic safety and essential performance of respiratory humidifying equipment
Referenced Standards
GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization
GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity
GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization
GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization
GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics
GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances
GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents
GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials
GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process
GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices
GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials
GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices
GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use
GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 27701-2011 Mechanical safety of cathode ray tubes
GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application
GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems
YY/T 0316-2016 Medical devices—Application of risk management to medical devices
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements
YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY/T 0664-2008 Medical device software—Software life cycle processes
YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
ISO 2882
ISO 3864-1:2002
ISO 7000:2004
ISO 7010:2011
ISO 9614-1
ISO 80000-1:2009
IEC 60601-1-6
IEC 60730-1:2010
IEC 60851-3:2009
IEC 60851-5:2008
YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests
GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance
GB 9706.201-2020 Medical electrical equipment—Part 2-1:Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
GB/T 18987-2015 Radiotherapy equipment—Coordinates,movements and scales
IEC/TR 60788:2004
Adopt standards
IEC 60601-2-64:2014
Related Standards
DZ/T 0101.12-1994
Active
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
DZ 4-1981
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active