GB/T 6403.1-1986
Replaced
GB/T 37400.14-2019
Active
National standards
GB/T 37400.14-2019 Heavy mechanical general technical specification—Part 14:Nondestructive test of steel castings
GB/T 37400.14-2019 Heavy mechanical general technical specification—Part 14:Nondestructive test of steel castings
Basic Information
Standard Code:
GB/T 37400.14-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Basic standards and general methods
ICS Name:
Mechanical Manufacturing Comprehensive
Publish Date:
2019-08-30
Implement Date:
2020-03-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国冶金设备标准化技术委员会(SAC/TC 409)
Pages:
51 pages
Scope
GB/T 37400的本部分规定了铸钢件的超声检测、射线检测、渗透检测和磁粉检测等无损检测方法、一般要求及其相应的质量等级。
本部分适用于:
——厚度≤600 mm经热处理的合金和非合金铁素体钢铸件的A型脉冲反射法超声检测。对于厚度>600 mm的铸件,如果没有其他规定,也可参照执行;
——厚度≥5 mm铸钢件的射线检测;
——铁磁性铸钢件表面及近表面缺陷的磁粉检测;
——铸钢件表面开口性缺陷的渗透检测;
——缺陷挖补处的磁粉检测和渗透检测。
本部分不适用于奥氏体铸钢件的超声检测。
Development Information
Drafting Units:
二重(德阳)重型装备有限公司、太原重工股份有限公司、中冶陕压重工设备有限公司、中国重型机械研究院股份公司、中国一重集团有限公司
Drafting Persons:
周澄、邵鞠民、苏静、张广勇、许常青、范靳科、阎颖、闵利峰、张辉、张林
Same series standard
GB/T 37400.1-2019 Heavy mechanical general technical specification—Part 1:Products inspection and test
GB/T 37400.2-2019 Heavy mechanical general technical specification—Part 2:Flame cutting parts
GB/T 37400.3-2019 Heavy mechanical general technical specification—Part 3:Welding parts
GB/T 37400.4-2019 Heavy mechanical general technical specification—Part 4:Iron castings
GB/T 37400.5-2019 Heavy mechanical general technical specification—Part 5:Nonferrous metal casting
GB/T 37400.6-2019 Heavy mechanical general technical specification—Part 6:Steel castings
GB/T 37400.7-2019 Heavy mechanical general technical specification—Part 7:Repair welding for steel castings
GB/T 37400.8-2019 Heavy mechanical general technical specification—Part 8:Forgings
GB/T 37400.9-2019 Heavy mechanical general technical specification—Part 9:Machining parts
GB/T 37400.10-2019 Heavy mechanical general technical specification—Part 10:Assembling
GB/T 37400.11-2019 Heavy mechanical general technical specification—Part 11:Piping
GB/T 37400.12-2019 Heavy mechanical general technical specification—Part 12:Painting
GB/T 37400.13-2019 Heavy mechanical general technical specification—Part 13:Packaging
GB/T 37400.15-2019 Heavy mechanical general technical specification—Part 15:Nondestructive test of steel forgings
GB/T 37400.16-2019 Heavy mechanical general technical specification—Part 16:Hydraulic system
Referenced Standards
GB/T 18851.3-2008 Non-destructive testing—Penetrant testing—Part 3:Reference test blocks
GB/T 19799.1-2015 Non-destructive testing—Ultrasonic testing—Specification for calibration block No.1
GB/T 19799.2-2012 Non-destructive testing—Ultrasonic testing—Specification for calibration block No.2
GB/T 19803-2005 Non-destructive testing—Radiographic image quality indicators—Principles and identification
GB/T 23901.1-2019 Non-destructive testing—Image quality of radiographs—Part 1:Determination of the image quality value using wire-type image quality indicators
GB/T 23907-2009 Non-destructive testing—Shims for magnetic particle testing
GB/T 5097-1985 Method for indirect assessment of black light sources
GB/T 5097-2005 Non-destructive testing—Penetrant testing and magnetic particle testing—Viewing conditions
GB/T 5097-2020 Non-destructive testing—Penetrant testing and magnetic particle testing—Viewing conditions
GB/T 9445-1999 Qualification and certification for nondestructive testing personnel
GB/T 9445-2005 Non-destructive testing—Qualification and certification of personnel
GB/T 9445-2008 Non-destructive testing—Qualification and certification of personnel
GB/T 9445-2015 Non-destructive testing—Qualification and certification of NDT personnel
GB/T 12604.1-2005 Non-destructive testing—Terminology—Terms used in ultrasonic testing
GB/T 12604.1-2020 Non-destructive testing—Terminology—Ultrasonic testing
GB/T 12604.2-1990 Terminology for nondestructive testing Radiographic testing
GB/T 12604.2-2005 Non-destructive testing—Terminology—Terms used in radiographic testing
GB/T 12604.3-2005 Non-destructive testing—Terminology—Terms used in penetrant testing
GB/T 12604.3-2013 Non-destructive testing—Terminology—Terms used in penetrant testing
GB/T 12604.5-1990 Terminology for nondestructive testing Magnetic particle testing
GB/T 12604.5-2008 Non-destructive testing—Terminology—Terms used in magnetic particle testing
GB/T 12604.5-2020 Non-destructive testing—Terminology—Magnetic particle testing
GB 12664-2003 General specification for portable X-ray security inspection equipment
GB 12664-2024 Technical specifications for portable X-ray security inspection equipment
GB/T 14058-1993 Apparatus for gamma radiography
GB/T 14058-2008 Apparatus for gamma radiography
GB/T 14058-2023 Apparatus for gamma radiography
GB/T 15822.1-2005 Non-destructive testing—Magnetic particle testing—Part 1:General principles
GB/T 15822.1-2024 Non-destructive testing—Magnetic particle testing—Part 1:General principles
GB/T 15822.2-2005 Non-destructive testing—Magnetic particle testing—Part 2:Detection media
GB/T 15822.2-2024 Non-destructive testing—Magnetic particle testing—Part 2:Detection media
GB/T 15822.3-2005 Non-destructive testing—Magnetic particle testing—Part 3:Equipment
GB/T 15822.3-2024 Non-destructive testing—Magnetic particle testing—Part 3:Equipment
GB/T 18851.2-2005 Non-destructive testing—Penetrant testing—Part 2:Testing of penetrant materials
GB/T 18851.2-2008 Non-destructive testing—Penetrant testing—Part 2:Testing of penetrant materials
GB/T 18851.4-2005 Non-destructive testing—Penetrant testing—Part 4:Equipment
GB/T 18851.5-2005 Non-destructive testing—Penetrant testing—Part 5:Means of verification
GB/T 18851.5-2014 Non-destructive testing—Penetrant testing—Part 5:Penetrant testing at temperatures higher than 50 ℃
GB/T 18851.6-2014 Non-destructive testing—Penetrant testing—Part 6:Penetrant testing at temperatures lower than 10 ℃
GB/T 19348.1-2003 Non-destructive testing-Industrial radiographic films—Part 1:Classification of film systems for industrial radiography
GB/T 19348.1-2014 Non-destructive testing—Industrial radiographic film—Part 1:Classification of film systems for industrial radiography
GB/T 19802-2005 Non-destructive testing—Industrial radiographic illuminators—Minimum requirements
GB/T 20129-2006 Electron linac for non-destructive testing
GB/T 20129-2015 Electron linac for non-destructive testing
GB/T 20737-2006 Non-destructive testing—General terms and definitions
GB/T 27664.1-2011 Non-destructive testing—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
GB/T 37400.7-2019 Heavy mechanical general technical specification—Part 7:Repair welding for steel castings
GB/T 9445-2024 Non-destructive testing—Qualification and certification of personnels
GB/T 18851.2-2024 Non-destructive testing—Penetrant testing—Part 2:Testing of penetrang materials
GB/T 27664.1-2026 Non-destructive testing instruments—Characterization and verification of ultrasonic test equipment—Part 1:Instruments
Related Standards
GB/T 6403.2-1986
Replaced
GB/T 6403.2-1986 Lubricating grooves
GB/T 6403.3-1986
Replaced
GB/T 6403.3-1986 Knurl
GB/T 6403.4-1986
Replaced
GB/T 6403.4-1986 Rounding and chamferd of parts
GB/T 6403.5-1986
Replaced
GB/T 6403.5-1986 Relief grooves for grinding wheels
GB/T 11349.1-1989
Replaced