GB 4580-1984
Replaced
GB/T 33382-2016
Active
National standards
GB/T 33382-2016 Inner armoured rubber hoses and hose assemblies for conveying dredging soil
GB/T 33382-2016 Inner armoured rubber hoses and hose assemblies for conveying dredging soil
Basic Information
Standard Code:
GB/T 33382-2016
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rubber hoses, adhesive tapes, and rubber cloths
ICS Name:
\nHose
Publish Date:
2016-12-30
Implement Date:
2017-07-01
Pages:
12 pages
Scope
This standard specifies the structure, dimensions, requirements, test methods, inspection rules, etc. of inner-armored slurry rubber hoses and hose assemblies. This standard is applicable to the transportation of mixtures of seawater, freshwater, and sludge, clay, and sand with a relative density of 1.0 g/cm3 to 2.3 g/cm3 at an ambient temperature of -20°C to +60°C, especially suitable for transporting coral reefs and gravel with rubber hoses.
Development Information
Referenced Standards
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 6669-2008 Flexible cellular polymeric materials—Determination of compression set
GB/T 10541-2013 Rubber hose,oil suction and discharge,offshore mooring
GB/T 229-1994 Metallic materials—Charpy notch impact test
GB/T 229-2007 Metallic materials—Charpy pendulum impact test method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 5563-1994 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2006 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5567-1994 Rubber and plastics hoses and hose assemblies—Determination of suction resistance
GB/T 5567-2006 Rubber and plastics hoses and hose assemblies—Determination of suction resistance
GB/T 5567-2013 Rubber and plastics hoses and hose assemblies—Determination of resistance to vacuum
GB/T 6342-1996 Cellular plastics and rubbers—Determination of linear dimensions
GB/T 6343-1995 Cellular plastics and rubbers—Determination of apparent (bulk) density
GB/T 6343-2009 Cellular plastics and rubbers—Determination of apparent density
GB/T 7528-2002 Rubber and plastics hoses and hose assemblies—Vocabulary
GB/T 7528-2011 Rubber and plastics hoses and hose assemblies—Vocabulary
GB/T 7528-2019 Rubber and plastics hoses and hose assemblies—Vocabulary
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
GB/T 9124-2000 Specification for steel pipe flanges
GB/T 9124-2010 Specification for steel pipe flanges
GB/T 9124.1-2019 Steel pipe flanges—Part 1:PN designated
GB/T 9124.2-2019 Steel pipe flanges—Part 2:Class designated
GB/T 9573-2003 Rubber and plastics hose and hose assemblies—Methods of measurement of dimensions
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies—Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GB/T 9576-2001 Rubber and plastics hose and hose assemblies—Guide to selection,storage,use and maintenance
GB/T 9576-2013 Rubber and plastics hoses and hose assemblies—Guidelines for selection,storage,use and maintenance
GB/T 9576-2019 Rubber and plastics hoses and hose assemblies—Guidelines for selection,storage,use and maintenance
GB/T 9577-2001 Rubber and plastics hose and hose assemblies—Rules for marking,package and transportation
GB/T 9867-1988 Rubber—Determination of abrasion resistance using a rotating cylinderical drum device
GB/T 9867-2008 Rubber,vulcanized or thermoplastic—Determination of abrasion resistance using a rotating cylindrical drum device
GB/T 11211-1989 Rubber, vulcanized—Determination of adhesion to metal—Tension method
GB/T 11211-2009 Rubber,vulcanized or thermoplastic—Determination of adhesion to metal—Two-plate method
GB/T 14905-1994 Rubber and plastics hose—Determination of adhesion between components
GB/T 14905-2009 Rubber and plastics hoses—Determination of adhesion between components
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components
GB/T 33380-2016 Rubber hoses with large diameter—Tensile test
GB 50236-2011 Code for construction and acceptance of field equipment, industrial pipe welding engineering
GB/T 5563-2025 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 7528-2025 Rubber and plastics hoses and hose assemblies—Vocabulary
Related Standards
GB/T 16590.1-1996
abolished_transferred
GB/T 16590.1-1996 Rubber and plastics hoses, non-collapsible, for fire-fighting service—Part 1:Semi-rigid reel hose for fixed first-aid installations
GB/T 16591-1996
Replaced
GB/T 16591-1996 Rubber hose and hose assemblies for transferring anhydrous ammonia
GB/T 10544-2003
Replaced
GB/T 10544-2003 Rubber hoses and hose assemblies—Rubber—covered, spiral wire reinforced, hydraulic type
GB 10543-2003
Replaced
GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling
GB/T 20023-2005
Active