GB/T 33968-2025 Hot rolled steel sections with improved weldability

GB/T 33968-2017 Hot rolled steel sections with improved weldability

GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis GB/T 222-2006 Permissible tolerances for chemical composition of steel products GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method GB/T 223.12-1991 Methods for chemical analysis of iron, steel and alloy—The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 2101-1989 General requirements of acceptance, packaging, marking and certification for section steel GB/T 2101-2008 General requirement of acceptance,packaging,marking,and certification for section steel GB/T 2101-2017 General requirement of acceptance,packaging,marking and certification for section steel GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 11263-1998 The hot-rolled H and cut T section steel GB/T 11263-2005 The hot-rolled H and cut T section GB/T 11263-2010 Hot-rolled H and cut T section steel GB/T 11263-2017 Hot rolled H and cut T section steel GB/T 11263-2024 Hot rolled H and cut T section steel GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20125-2006 Low-alloy steel—Determination of multi-element contents—Inductively coupled plasma atomic emission spectrometric method GB/T 41749-2022 General requirements for surface condition of hot-rolled sections YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values YB/T 4811-2020 The ultrasonic testing method for hot-rolled H-shaped steel YB/T 4831-2020 Thickness direction performance hot-rolled H-beam