GB/T 904-1994
Abolished
JT/T 892-2014
Abolished
Industry standards-Traffic
JT/T 892-2014 Block assembly type expansion and contraction installation for highway bridge
JT/T 892-2014 Block assembly type expansion and contraction installation for highway bridge
Basic Information
Standard Code:
JT/T 892-2014
Standard Type:
Industry standards
Standard Status:
Abolished
is_force_gb:
no
CCS Name:
Bridge and culvert engineering
ICS Name:
Bridge construction
Publish Date:
2014-04-15
Implement Date:
2014-09-01
Pages:
16 pages
Scope
This standard specifies the product classification, models, specifications, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of segmental assembly expansion joints for highway bridges (referred to as expansion joints). This standard applies to expansion joints with an expansion range of 0 to 240 mm for highway bridges. Municipal bridges and other structural projects can refer to it for use.
Development Information
Referenced Standards
GB/T 11264-1989 Light rails
GB/T 11264-2012 Hot-rolled light rails
GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 11345-2013 Non-destructive testing of welds—Ultrasonic testing—Techniques,testing levels,and assessment
GB/T 11345-2023 Non-destructive testing of welds—Ultrasonic testing—Techniques, testing levels and assessment
GB/T 11352-1989 Carbon steel castings for general engineering purposes
GB/T 11352-2009 Carbon steel castings for general engineering purpose
GB/T 1222-1984 Spring steel
GB/T 1222-2007 Spring steels
GB/T 1222-2016 Spring steels
GB/T 12467.3-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 3:Standards quality requirements
GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials—Part 3:Standard quality requirements
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 1682-1994 Rubber, vulcanized—Determination of low-temperature brittleness(single test piece method)
GB/T 1682-2014 Rubber,vulcanized—Determination of low-temperature brittleness—Single test piece method
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 23934-2009 Hot coiled helical compression springs—Technical specifications
GB/T 23934-2015 Hot formed helical compression springs—Technical Requirement
GB/T 2650-1989 Method of impact test for welded joint
GB/T 2650-2008 Impact test methods on welded joints
GB/T 2650-2022 Destructive tests on welds in metallic materials—Impact tests
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 6031-1998 Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6031-2017 Rubber,vulcanized or thermoplastic—Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 699-1999 Quality carbon structural steels
GB/T 699-2015 Quality carbon structure steels
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 7659-1987 Carbon steel castings suitable for welded structure
GB/T 7659-2010 Steel casting suitable for welded structure
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic—Determination of compression set at ambient elevated or low temperatures
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7759.2-2014 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 2:At low temperatures
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
JT/T 327-2016 JT/T 327-2016 General Technical Specification for Road Bridge Expansion Device
JT/T 327-2004 Road bridge expansion joint
GB/T 7659-2025 Steel castings for welding structures
GB/T 11264-2025 Hot-rolled light rails
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1222-2025 Spring steels
Related Standards
GB/T 18365-2001
Replaced
GB/T 18365-2001 Technical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge
CJ/T 297-2008
Replaced
CJ/T 297-2008 High density polyethylene sheathing compounds for bridge cable
GB/T 17955-2009
Active
GB/T 17955-2009 Spherical bearings for bridges
CJ/T 374-2011
Active
CJ/T 374-2011 Spherical bearings for urban bridges
GB/T 31067-2014
Active