GB/T 6068-2021 Active National standards

GB/T 6068-2021 Test code for truck crane and tyre crane

GB/T 6068-2021 Test code for truck crane and tyre crane

Publish Date: 2021-05-21 Implement Date: 2021-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 6068-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Cranes
ICS Name: Crane
Publish Date: 2021-05-21
Implement Date: 2021-12-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国起重机械标准化技术委员会(SAC/TC 227)
Pages: 38 pages

Scope

本文件规定了汽车起重机(含全地面起重机)和轮胎起重机(以下简称起重机)的试验条件、底盘磨合、准备性检验、性能试验、可靠性试验、结构试验、工业性试验和检验规则等。本文件适用于汽车起重机和轮胎起重机。

Development Information

Drafting Units:

中联重科股份有限公司、国家工程机械质量监督检验中心、徐州重型机械有限公司、长沙中联恒通机械有限公司、深圳特种设备安全检验研究院

Drafting Persons:

罗凯、刘宇新、刘建华、罗贤智、王雅妮、刘劲松、王启涛、贾佳奇、杨武、陆阳陈、彭友谊、陈嘉、崔寒珑、李英智、郭堃、杨威、刘永赞、冯科喜、胡海鹏、李波、李春生、涂凌志、李军

Word Count: 78 Thousand words Pages: 38 pages

Replace the following standards

Referenced Standards

GB 1495-2002 Limits and measurement methods for noise emitted by accelerating motor vehicles GB/T 3730.3-1992 Motor vehicles and towed vehicles—Dimensions of vehicles—Terms and definitions GB/T 3811-1983 Design rules for cranes GB/T 3811-2008 Design rules for cranes GB 3847-1999 Limits and measurement methods for exhaust visible pollutants from compression ignition(C.I.) engines and vehicles equipped with C.I. engines GB 3847-2018 Limits and measurement methods for emissions form diesel vehicles under free acceleration and lugdown cycle GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. GB 4094-1999 Motor vehicles—Symbols for controls, indicators and tell-tales GB 4094-2016 Symbols for controls,indicators and tell-tales of motor vehicles GB/T 4094.2-2005 Electric vehicles—Symbols for controls, indicators and tell-tales GB/T 4094.2-2017 Electric vehicles—Symbols for controls,indicators and tell-tales GB 4785-1998 Prescription for installation of the external lighting and light signaling devices for motor vehicles and their trailers GB 4785-2007 Prescription for installation of the external lighting and light-signaling devices for motor vehicles and their trailers GB 4785-2019 Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers GB/T 5905-1986 Cranes—Test code and procedures GB/T 5905-2011 Cranes—Test code and procedures GB/T 5905.1-2023 Cranes—Inspection and text code—Part 1:General principle GB 7258-1997 Safety specifications for motor vehicles operating on roads GB 7258-2004 Safety specifications for power-driven vehicles operating on roads GB 7258-2012 Safety specifications for power-driven vehicles operating on roads GB 7258-2017 Technical specifications for safety of power-driven vehicles operating on roads GB/T 6974.1-1986 Lifting appliances—Vocabulary—Types of lifting appliances GB/T 6974.1-2008 Cranes—Vocabulary—Part 1:General GB/T 6974.2-1986 Lifting appliances—Vocabulary—Parameters GB/T 6974.2-2010 Cranes—Vocabulary—Part 2:Mobile cranes GB/T 6974.2-2017 Cranes—Vocabulary—Part 2:Mobile cranes GB/T 10051.1-2010 Lifting hooks—Part 1:Mechanical properties,lifting capacities,stresses and materials GB/T 10051.1-1988 Lifting hooks--Mechanical properties,lifting capacities,stresses and materials GB/T 10051.2-2010 Lifting hooks—Part 2:Technical conditions for forged hooks GB/T 10051.2-1988 Lifting hooks--Technical conditions of shank hook GB/T 10051.3-2010 Lifting hooks—Part 3:Inspection of forged hooks in service GB/T 10051.4-2010 Lifting hooks—Part 4:Blanks of shank hook with point GB/T 10051.4-1988 Lifting hooks--Blanks of shank hook with point GB/T 10051.5-2010 Lifting hooks—Part 5:Shank hooks with point GB/T 10051.5-1988 Lifting hooks--Shank hooks with point GB 11567-2017 Motor vehicles and trailers-lateral and rear underrun protection requirements GB 11567.1-2001 Motor vehicles and trailers—Lateral protection requirements GB 11567.2-2001 Motor vehicles and trailers—Rear underrun protection requirements GB/T 12534-1990 Motor vehicles—General rules of road test method GB/T 12539-1990 Motor vehicles—Steep hill climbing—Test method GB/T 12539-2018 Motor vehicles steep hill climbing test method GB/T 12540-1990 Motor vehicles—Minimum turning diameter—Method of measurment GB/T 12540-2009 Minimum turning circle diameter,minimum turning clearance circle diameter and out value test method for motor vehicles GB/T 12540-2024 Minimum turning circle diameter, turning clearance circle and swing-out value test method for motor vehicles and combination of vehicles GB/T 12541-1990 Motor vehicles—Passing topography capacity—Test method GB/T 12541-2023 Motor vehicles passing capacity test method GB/T 12543-1990 Motor vehicles—Acceleration performance—Test method GB/T 12543-2009 Acceleration performance test method for motor vehicles GB/T 12544-1990 Motor vehicles—Maximum speed—Test method GB/T 12544-2012 Measurement of maximum speed of motor vehicles GB/T 12547-1990 Motor vehicles—Minimum stable speed—Test method GB/T 12547-2009 Minimum stable speed test method for motor vehicles GB 12602-1990 Lifting appliances—Safety devices against overloading—Safety technology code GB/T 12602-2009 Lifting appliances-safety devices against overloading GB/T 12602-2020 Safety devices against over loading for lifting appliances GB/T 12673-1990 Molor vehicles—Basic dimensions—Measuring method GB/T 12673-2019 Motor vehicle main dimensions measurement method GB/T 12674-1990 Motor vehicles—Weight parameter—Measuring method GB/T 12674-2024 Motor vehicles,trailers and combination vehicles mass parameters measurement method GB 12676-1999 Road vehicle—Braking systems—Structure,performance and test methods GB 12676-2014 Technical requirements and testing methods for commercial vehicle and trailer braking systems GB 15052-1994 Lifting appliances—Dangerous positions and signs GB/T 15052-2010 Cranes—Safety signs and hazard pictorials—General principles GB 15082-1999 Motor vehicles—Speed meters GB 15082-2008 Speed meters for motor vehicle GB 15084-1994 Motor vehicles—Rear view mirrors—Requirements of performance and installation GB 15084-2006 Motor vehicles—Rear view mirrors—Requirements of performance and installation GB 15084-2013 Motor vehicles—Devices for indirect vision—Requirements of performance and installation GB 15084-2022 Motor vehicles—Devices for indirect vision—Requirements of performance and installation GB 15741-1995 The license plates (stands) and its position on motor vehicles and trailer GB/T 20062-2006 Mobile crawler crane—Limits and measurement methods for operating noise GB/T 20062-2017 Mobile cranes—Limits and measurement methods for operating noise GB/T 21457-2008 Cranes and related equipment—Accuracy requirements for measuring parameters during testing GB/T 24818.2-2010 Cranes—Access,guards and restrains—Part 2:Mobile cranes GB/T 24818.2-2021 Cranes—Access,guards and restraints—Part 2:Mobile cranes GB 26511-2011 Front underrun protective requirements for commercial vehicle GB/T 28264-2012 Lifting appliances—Managing system of safety monitoring GB/T 28264-2017 Lifting appliances—Safety monitoring system GB 34659-2017 Requirements and test methods relating to the spray-suppression systems of motor vehicles and their trailers GB 36886-2018 Limit and measurement methods for exhaust smoke form non-road mobile machinery equipped with diesel engine JB/T 4030.1-2013 Automobile and tire crane testing specifications Part 1: Operations reliability testing JB/T 4030.1-2000 Car Crane and Tire Crane Test Specification for Reliability Operations JB/T 4030.2-2013 Car Crane and Tyre Crane Test Specification Part 2: Running Reliability Test JB/T 4030.2-2000 Car Crane and Tyre Crane Test Specification for Reliability in Operation Test JB/T 4030.3-2013 Automobile and tire crane test specifications Part 3: Hydraulic system test JB/T 4030.3-2000 Car Crane and Tire Crane Test Specifications - Hydraulic System Test JB/T 9737-2013 Flowing crane hydraulic oil solid particle pollution level, measurement and selection JB/T 9737.1-2000 JB/T 9737.1-2000 Hydraulic Oil for Automotive Cranes and Tyre Cranes - Solid Particle Pollution Level JB/T 9737.2-2000 Car Crane and Tire Crane Hydraulic Oil Solid Particle Pollution Measurement Method JB/T 9737.3-2000 Car Crane and Tyre Crane Hydraulic Oil Selection and Replacement JB/T 9738-2015 JB/T 9738-2015 Automotive Crane。 JB/T 9738-2000 Car Crane and Tire Crane Technical Requirements

Related Standards

Contact Us