GB 14736-1993
Replaced
GB/T 3811-2008
Active
National standards
GB/T 3811-2008 Design rules for cranes
GB/T 3811-2008 Design rules for cranes
Basic Information
Standard Code:
GB/T 3811-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cranes
ICS Name:
Crane equipment
Publish Date:
2008-04-30
Implement Date:
2009-06-01
Pages:
268 pages
Scope
This standard establishes the necessary guidelines that should be followed in the design of cranes in terms of their overall structure, mechanical systems, electrical systems, and safety features. It specifies design and calculation requirements and methods, and can serve as a technical basis for analyzing and evaluating designs.
This standard applies to gantry cranes, jib cranes, and cable-operated cranes, but does not address special issues related to the design of these cranes. This standard can also be used as a reference for other types of cranes.
Development Information
Replace the following standards
Referenced Standards
GB/T 3633-1995 Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 4205-2003 Man-machine interface(MMI)—Actuating principles
GB/T 4205-2010 Basic and safety principles for man-machine interface(MMI),marking and identification—Actuating principles
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4942.1-2001 Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification
GB/T 5117-1995 Carbon steel covered electrodes
GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118-1995 Low alloy steel covered electrodes
GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
GB 5226.2-2002 Safety of machinery—Electrical equipment of machines—Part 32:Requirements for hoisting machines
GB/T 5269-1999 Double-pitch precision roller chains and sprockets for transmission and conveyors
GB/T 5269-2008 Double-pitch precision roller chains,attachments and associated chain sprockets for transmission and conveyors
GB/T 5293-1999 Carbon steel electrodes and fluxs for submerged arc welding
GB/T 5293-2018 Solid wire electrodes,tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels
GB/T 8110-1995 Welding wires for gas shielding arc welding of carbon and low alloy steels
GB/T 8110-2008 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel
GB/T 8110-2020 Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels
GB/T 8918-1996 Steel wire ropes
GB/T 8918-2006 Steel wire ropes for important purposes
GB/T 9439-1988 Grey iron castings
GB/T 9439-2010 Grey iron castings
GB/T 9439-2023 Grey iron castings
GB/T 10051.1-2010 Lifting hooks—Part 1:Mechanical properties,lifting capacities,stresses and materials
GB/T 10051.1-1988 Lifting hooks--Mechanical properties,lifting capacities,stresses and materials
GB/T 10062.1-2003 Calculation of load capacity of bevel gear—Part1:Introduction and general influence factors
GB/T 10062.2-2003 Calculation of load capacity of bevel gear—Part2:Calculation of surface durability (pitting)
GB/T 10062.3-2003 Calculation of load capacity of bevel gear—Part3:Calculation of tooth root strength
GB/Z 10062.20-2025 Calculation of load capacity of bevel gears—Part 20:Calculation of scuffing load capacity—Flash temperature method
GB/Z 10062.32-2025 Calculation of load capacity of bevel gears—Part 32:ISO rating system for bevel and hypoid gears—Sample calculation for scuffing load capacity
GB/T 11264-1989 Light rails
GB/T 11264-2012 Hot-rolled light rails
GB/T 11264-2025 Hot-rolled light rails
GB/T 11352-1989 Carbon steel castings for general engineering purposes
GB/T 11352-2009 Carbon steel castings for general engineering purpose
GB 14048.4-2003 Low-voltage switchgear and controlgear—Electromechanical contactors and motor-starters
GB/T 14048.4-2010 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector)
GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector)
GB/T 14408-1993 Low alloy steel castings for general engineering and structural purposes
GB/T 14408-2014 Low alloy steel castings for general engineering and structural purposes
GB/T 14408-2024 Low alloy steel castings for general engineering and structural purposes
GB 15052-1994 Lifting appliances—Dangerous positions and signs
GB/T 15052-2010 Cranes—Safety signs and hazard pictorials—General principles
GB/T 17909.1-1999 Cranes—Crane driving manual—Part 1:General
GB/T 17909.1-2023 Cranes—Operating manual—Part 1:General
GB/T 18453.1
GB/T 19418-2003 Arc-welded joints in steel—Guidance on quality levels for imperfections
GB/T 20118-2006 Steel wire ropes for general purpose
GB/T 20118-2017 Steel wire ropes for general purposes
GB/T 20118-2025 General technical requirements for steel wire ropes
GB/T 20303.1-2006 Cranes—Cabins—Part 1:General
GB/T 20303.1-2016 Cranes—Cabins and control stations—Part 1:General
GB/T 20947-2007 Short-link chain for lifting purposes—Grade T(types T,DAT and DT),fine-tolerance hoist chain
GB 50058-2014 Code for design of electrical installations in explosive atmospheres
JB/T 6392-2008 crane wheel
JB/T 6392.1-1992 The match between the type of car wheels, the profile shape and the track of the crane truck
JB/T 6392.2-1992 Crane car wheel technical specifications
JB/T 7017-1993 Crane hydraulic buffer
JB/T 7687.1-1995 JB/T 7687.1-1995 Shaft hook cross beam blank pieces
JB/T 7687.2-1995
JB/T 7687.3-1995 JB/T 7687.3-1995 straight-handle hook nut
JB/T 7687.4-1995
JB/T 8110.1-1999 JBT 8110.1-1999 Crane Spring Buffer
JB/T 8110.2-1999 JBT 8110.2-1999 Crane Rubber Buffer
JB/T 8398
JB/T 9005.1-1999 Crane-used cast-iron sliding pulley with rope groove cross-section
JB/T 9005.2-1999 The selection series and matching of the diameter of the cast-iron sliding pulley used in a crane
JB/T 9005.3-1999 Cranes used casting pulley type, hub and bearing size
JB/T 9005.4-1999 Crane casting pulley type A
JB/T 9005.5-1999 Crane casting type B sliding pulley
JB/T 9005.6-1999 Crane-mounted Casting Slide Pulley Type C
JB/T 9005.7-1999 Crane-mounted casting pulley D type
JB/T 9005.8-1999 Crane-mounted Casting Slide Pulley Type E
JB/T 9005.9-1999 Cylindrical Casting Gate type Crane Wheel (F)
JB/T 9005.10-1999
JB/T 9006-2013 Crane winch
JB/T 9006.1-1999 Crane-mounted cast-iron drum with diameter and groove shape
JB/T 9006.2-1999 Crane-mounted cast-iron drum type and size
JB/T 9006.3-1999
JB/T 10833-2017 Cranes with polyurethane buffering device
JB/T 10833-2008 Crane polyurethane buffer
JG/T 5078.1-1996 Construction machinery and equipment Welded pulleys
YB/T 5055-2014 Cranes use steel rails
YB/T 5055-2025 Cranes use steel rails
Related Standards
GB 14737-1993
Replaced
GB 14737-1993 Specifications for the operation of chain slings used in the port cargo handling
GB 14738-1993
Replaced
GB 14738-1993 Specifications for the operation of wire rope slings used in the port cargo handling
GB 14739-1993
Replaced
GB 14739-1993 Specifications for the operation of fibre sling used in the port cargo handling
GB 10053-1996
Replaced
GB 10053-1996 Building hoist—Inspecting regulations
GB 10055-1996
Replaced