GB/T 13862-1992
Abolished
GB/T 16915.2-2024
Active
National standards
GB/T 16915.2-2024 Switches for household and similar fixed electrical installations—Part 2-1:Particular requirements for electronic control devices
GB/T 16915.2-2024 Switches for household and similar fixed electrical installations—Part 2-1:Particular requirements for electronic control devices
Basic Information
Standard Code:
GB/T 16915.2-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electrical equipment and appliances
ICS Name:
Switch
Publish Date:
2024-09-29
Implement Date:
2025-10-01
Pages:
124 pages
Scope
The chapter in GB/T 16915.1-2024 is replaced by the following content.
This document specifies the technical requirements for electronic control devices, including electronic switches, residential and building electronic systems (HBES)/building automation and control systems (BACS) switches, and related electronic auxiliary devices, including classification, protection against electric shock, grounding measures, structural requirements, mechanical performance, and electrical performance.
This document applies to electronic switches and HBES/BACS switches used indoors or outdoors in fixed electrical installations for household and similar purposes. These switches are rated for a maximum AC voltage of 250V and a maximum current of 16A.
This document also applies to electronic auxiliary devices rated for a maximum AC voltage of 250V and a maximum DC voltage of 120V, such as sensors and buttons.
This document also applies to electronic remote control switches (RCS) and electronic delay switches (TDS). Specific requirements are given in Appendix FF.
Switches with only passive components (e.g., resistors, capacitors, inductors, positive temperature coefficient (PTC) and negative temperature coefficient (NTC) elements, pressure-sensitive resistors, printed circuit boards, and connectors) are not considered electronic control devices.
This document also applies to electronic switches and HBES/BACS switches used for operating lighting circuits, controlling lamp brightness (dimmers), controlling motor speeds (e.g., for exhaust fans), and other purposes (e.g., heating control).
Development Information
Same series standard
Replace the following standards
GB/T 16915.2-2012 Switches for household and similar fixed electrical installations—Part 2-1:Particular requirements—Electronic switches
GB/T 16915.6-2015 Switches for household and similar fixed electrical installations—Part 2-5:Switches and related accessories for use in home and building electronic systems(HBES)
Referenced Standards
GB/T 14536.19-2006 Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves, including mechanical requirements
GB/T 14536.19-2017 Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves,including mechanical requirements
GB/T 14536.20-2008 Automatic electrical controls for household and similar use—Particular requirements for automatic electric water and air flow sensing controls,including mechanical requirements
GB/T 14536.21-2008 Automatic electrical controls for household and similar use—Particular requirements for electrically operated oil valves,including mechanical requirements
GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests
GB/T 16915.3-2019 Switches for household and similar fixed-electrical installations—Part 2-2:Particular requirements for electromagnetic remote-control switches (RCS)
GB/T 16915.4-2019 Switches for household and similar fixed-electrical installations—Part 2-3:Particular requirements for time delay switches (TDS)
GB 17466-1998 General requirements for enclosures for accessories for household and similar fixed electrical installations
GB/T 17466.1-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements
GB/T 17466.1-2019 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements
GB/T 17466.21-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21:Particular requirements for boxes and enclosures with provision for suspension means
GB/T 17466.21-2022 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21:Particular requirements for boxes and enclosures with provision for suspension means
GB/T 17466.22-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22:Particular requirements for connecting boxes and enclosures
GB/T 17466.22-2022 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22:Particular requirements for connecting boxes and enclosures
GB/T 17466.23-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23:Particular requirements for floor boxe and enclosures
GB/T 17466.23-2022 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23:Particular requirements for floor boxes and enclosures
GB/T 17466.24-2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24:Particular requirements for enclosures for housing protective devices and similar power consuming devices
GB/T 17466.24-2017 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24:Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.2-1999 Electromagnetic compatibility Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A
GB/T 17625.2-2007 Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.8-1998 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test
GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test
GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.20-2014 Electromagnetic compatibility—Testing and measurement techniques—Emission and immunity testing in transverse electromagnetic(TEM) waveguide
GB/T 17743-2021 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 18039.3-2003 Electromagnetic compatibility—Environment—Eompatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
GB/T 18039.3-2017 Electromagnetic compatibility—Environment—Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
GB 19212.7-2006 Safety of power transformers, power supply units and similar—Part 7:Particular requirements for safety isolating transformers for general use
GB/T 19212.7-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V—Part 7:Particular requirements and test for safety isolating transformers and power supply units incorporating safety isolating transformers
GB/T 39673.3-2020 Home and building electronic systems (HBES) and building automation and control systems (BACS)—Part 3:Electrical safety requirements
GB/T 42079-2022 Digital load side transmission lighting control(DLT)—Basic requirements
IEC 62479
Adopt standards
IEC 60669-2-1:2021
Related Standards
GB/T 14280-1993
Abolished
GB/T 14280-1993 Thermal time delay switch, Generic specification of
GB/T 14281-1993
Abolished
GB/T 14281-1993 Thermostatic switch, Generic specification of
GB/T 14810-1993
Replaced
GB/T 14810-1993 AC high voltage switches for rated voltages of 110kV and above
GB 15092.2-1994
Replaced
GB 15092.2-1994 Switches for appliances—Part 2:Particular requirements for cord switches
GB 15092.3-1998
Replaced