GB/T 41666.4-2024 Active National standards

GB/T 41666.4-2024 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 4:Lining with cured-in-place pipes

Publish Date: 2024-03-15 Implement Date: 2024-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 41666.4-2024

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Plastic profiles

ICS Name: Plastic pipes, fittings, and valves

Publish Date: 2024-03-15

Implement Date: 2024-10-01

Pages: 56 pages

Scope

This document specifies the requirements for plastic pipe systems used in the non-excavation repair of underground non-pressure drainage networks with an in-situ curing lining method when the working temperature does not exceed 50℃, including the requirements for the lining of flexible hoses during the production stage ("M" stage) and the lining of cured pipes during the construction stage ("I" stage). It also describes the corresponding test methods and stipulates the construction and acceptance requirements. This document is applicable to various thermosetting resin systems, carrier materials, reinforcing materials, plastic films related to the process, and installed cured lining pipe systems used in the in-situ curing lining method.

Development Information

Word Count: 82 Thousand words Pages: 56 pages

Same series standard

GB/T 41666.7-2024 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 7:Lining with spirally-wound pipes

Referenced Standards

GB/T 1040.4-2006 Plastics—Determination of tensile properties—Part 4:Test conditions for isotropic and orthotropic fibre-reinforced plastic composites GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite GB/T 9341-2008 Plastics—Determination of flexural properties GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading GB/T 37862-2019 Plastics pipes used for pipeline rehabilitation—General ISO 7685:2019 ISO 8513:2023 ISO 10468 ISO 10928:2016 ISO 10952 ISO 11296-1 ISO 14125:1998 GB/T 1040.3-2006 Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets GB/T 2411-1980 Plastics—Shore hardness test GB/T 2411-2008 Plastics and ebonite—Determination of indentation hardness by means of a durometer(shore hardness) GB/T 2567-1995 The generals of test methods for properties of resin casting body GB/T 2567-2008 Test methods for properties of resin casting boby GB/T 2567-2021 Test methods for properties of resin casting body GB/T 3857-1987 Test method for chemical resistance of glass fiber reinforced thermosetting plastics GB/T 3857-2005 Test method for chemical resistance of glass fiber reinforced thermosetting plastics GB/T 3857-2017 Test method for chemical resistance of glass fiber reinforced thermosetting plastics GB/T 4202-2001 Designation for glass fibres GB/T 4202-2007 Designation for glass fibres GB/T 4202-2023 Designation for glass fibres GB/T 6672-2001 Plastics film and sheeting—Determination of thickness by mechanical scanning GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions GB/T 9573-2003 Rubber and plastics hose and hose assemblies—Methods of measurement of dimensions GB/T 9573-2013 Rubber and plastics hoses and hose assemblies—Methods of measurement of the dimensions of hoses and the lengths of hose assemblies GB/T 9914.1-2001 Test method for reinforcement products Part 1:Determination of moisture content GB/T 9914.1-2013 Test method for reinforcement products—Part 1:Determination of moisture content GB/T 17638-1998 Geosynthetics—Synthetic staple fibers needlepunched nonwoven geotextiles GB/T 17638-2017 Geosynthetics—Synthetic staple fibers needlepunched nonwoven geotextiles GB/T 18369-2001 Glass fiber roving GB/T 18369-2008 Glass fiber roving GB/T 18369-2022 Glass fiber roving GB/T 19278-2003 General terms and their definitions of thermoplastic pipes, fittings and valves GB/T 19278-2018 General terms and their definitions of thermoplastic pipes,fittings and valves GB/T 25040-2010 Glass fibre stitched fabrics GB/T 41705-2022 Carbon fibre—Designation system for filament yarns GB/T 42697-2023 Nonwovens—Test method for porosity GB/T 8806-1988 Method for dimension measuring of plastic pipes GB 50268-2008 Code for construction and acceptance of water and sewerage pipeline works CJJ/T 210-2014 Technical specification for trenchless rehabilitation and renewal of urban sewer pipeline

Adopt standards

ISO 11296-4:2018

Related Standards

GB/T 13663-2000 Replaced

GB/T 13663-2000 Polyethylene pipes for water supply

Publish Date: 2000-11-21

GB/T 18251-2000 Replaced

GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds

Publish Date: 2000-11-21

GB/T 18252-2000 Replaced

GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

Publish Date: 2000-11-21

GB/T 18477-2001 Replaced

GB/T 18477-2001 Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil, waste and drainage

Publish Date: 2001-10-24

GB/T 18742.1-2002 Replaced

GB/T 18742.1-2002 Polypropylene piping systems for hot and cold water installations—Part 1:General

Publish Date: 2002-05-29

GB/T 18742.2-2002 Replaced

GB/T 18742.2-2002 Polypropylene piping systems for hot and cold water installations—Part 2:Pipes

Publish Date: 2002-05-29