GB/T 6170-2015 Active National standards

GB/T 6170-2015 Hexagon nuts,style 1

GB/T 6170-2015 Hexagon nuts,style 1

Publish Date: 2015-12-31 Implement Date: 2016-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 6170-2015

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: \nNut

Publish Date: 2015-12-31

Implement Date: 2016-04-01

Pages: 7 pages

Scope

This standard specifies the type, dimensions, technical requirements, and markings of Type 1 hexagonal nuts. This standard applies to nuts with thread sizes M1.6 to M64, performance grades of Class 6, Class 8, and Class 10, A250, A270, A450, A470, CU2, CU3, and AL4, and product grades of Class A and Class B. Class A is used for nuts with a diameter of D ≤ 16 mm; Class B is used for nuts with a diameter of D > 16 mm.

Development Information

Word Count: 13 Thousand words Pages: 7 pages

Replace the following standards

GB/T 6170-2000 Hexagon nuts,style 1

Referenced Standards

GB/T 3098.10 GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 193-2003 General purpose metric screw threads—General plan GB/T 1237-2000 Designation system for fasteners GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts GB/T 3098.15-2000 Mechanical properties of fasteners—Nuts made of stainless-steel GB/T 3098.15-2014 Mechanical properties of fasteners—Stainless steel nuts GB/T 3098.15-2023 Mechanical properties of fasteners—Stainless steel nuts GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.3-2008 Fasteners—Hot dip galvanized coatings GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners GB/T 5276-2015 Fasteners—Bolts,screws,studs and nuts—Symbols and descriptions of dimensions GB/T 5779.2-2000 Fasteners—Surface discontinuities—Nuts GB/T 6175-2000 Hexagon nuts,style 2 GB/T 6175-2016 Hexagon nuts,style 2 GB/T 9145-2003 General purpose metric screw threads—Limits of sizes for the screw threads of medium quality and preferable plan GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts

Adopt standards

ISO 4032:2012

Related Standards

GB/T 809-1988 Active

GB/T 809-1988 Insert round nuts

Publish Date: 1988-06-24

GB/T 1229-1991 Replaced

GB/T 1229-1991 High strength large hexagon nuts for steel structures

Publish Date: 1991-04-22

GB/T 17880.1-1999 Active

GB/T 17880.1-1999 Flat head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.2-1999 Active

GB/T 17880.2-1999 Countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.3-1999 Active

GB/T 17880.3-1999 Small countersunk head riveted nuts

Publish Date: 1999-10-11

GB/T 17880.4-1999 Active

GB/T 17880.4-1999 120°Small countersunk head riveted nuts

Publish Date: 1999-10-11