GB/T 21432-2008 Replaced National standards

GB/T 21432-2008 Graphite pressure vessels

GB/T 21432-2008 Graphite pressure vessels

Publish Date: 2008-01-31 Implement Date: 2008-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 21432-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pressure vessels, gas cylinders

Publish Date: 2008-01-31

Implement Date: 2008-07-01

Pages: 14 pages

Scope

1.1 This standard specifies the requirements for the design, materials, manufacturing, inspection and acceptance, and storage and transportation of graphite pressure vessels (hereinafter referred to as "vessels"). 1.2 This standard applies to all kinds of graphite pressure vessels used to contain gases, liquefied gases, and liquids with a maximum working temperature of not less than the standard boiling point, with a working pressure of not less than 0.1MPa and not more than 24MPa, and a product of pressure and volume of not less than 25MPa·L. The applicable temperature range is -60℃ to 400℃. 1.3 The metal pressure-bearing components in the vessels shall comply with the relevant provisions of GB 150 and GB 151; the non-pressure-bearing steel components shall comply with the relevant provisions of JB/T 4735. 1.4 This standard does not apply to the following graphite vessels: a) Graphite vessels directly heated by flames; b) Graphite vessels in nuclear energy devices; c) Cast graphite; d) Graphite brick-board lined equipment where the main stress is borne by the metal shell.

Development Information

Word Count: 25 Thousand words Pages: 14 pages

Superseded by the following standards

GB/T 21432-2021 Graphite pressure vessels

Referenced Standards

GB 150-1998 Steel pressure vessels GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB 151-1999 Tubular heat exchangers GB/T 151-2014 Heat exchangers GB/T 151-2026 Heat exchangers GB/Z 151-2026 Fire prevention measures on converters for high-voltage direct current(HVDC)systems,static var compensators(SVC)and flexible AC transmission systems(FACTS)and their valve halls GB/T 1431-1985 Carbon materials—Determination of the compressive strength GB/T 1431-2009 Carbon materials—Determination of the compressive strength GB/T 1431-2019 The test method for compressive strength of carbon materials GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB/T 6155-2008 Carbon materials—Determination of the true density or porosity GB/T 8721-1988 Method for the determination of tensile strength of carbonaceous materials GB/T 8721-2009 Method for the determination of tensile strength of carbonaceous materials GB/T 8721-2019 The test method for tensile strength of carbon materials GB/T 9439-1988 Grey iron castings GB/T 9439-2010 Grey iron castings GB/T 9439-2023 Grey iron castings GB/T 13465.1-2002 Test method of mechanical properties of impermeable graphite materials—General GB/T 13465.1-2014 Test method of impermeable graphite materials—Part 1:General of test method for mechanical properties GB/T 13465.1-2024 Test method of impermeable graphite materials—Part 1:General GB/T 13465.2-2002 Test method for flexure strength of impermeable graphite materials GB/T 13465.2-2014 Test method of impermeable graphite materials—Part 2:Flexure strength GB/T 13465.3-2002 Test method for compressive strength of impermeable graphite materials GB/T 13465.3-2014 Test method of impermeable graphite materials—Part 3:Compress strength HG/T 2059-2014 Non-permeable Graphite Tubing Technical Conditions HG/T 2059-2004 Non-permeable Graphite Tubing Technical Conditions HG/T 2378-2007 The method for testing the adhesive bonding strength of graphite bonding agents HG/T 2378-1992 Method for testing the adhesive bonding strength of graphite adhesive joints HG/T 2379-2007 The method for testing the shear strength of graphite bonding agent HG/T 2379-1992 The method for testing the shear strength of graphite bonding agent HG/T 2380-1992 Graphite phenolic adhesive shrinkage test method HG/T 2381-1992 Test method for hydraulic pressure bursting of impermeable graphite pipes HG/T 2642-2006 The method for testing the tensile strength of impermeable graphite materials JB/T 4711-2003 Coating and packing for pressure vessels transport JB/T 4735 YB/T 119-1997 Carbon materials--Determination method of the bulk density YB/T 2818-1994 Graphite block YB/T 2818-2024 YB/T 2818-2024 Graphite block 压力容器安全技术监察规程(原国家质量技术监督局 1999年) 压力容器压力管道设计单位资格许可与管理规则(国家质量监督检验检疫总局 2003年) TSG R 0001-2004

Related Standards

GB/T 6058-1985 Replaced

GB/T 6058-1985 Method for preparation and internal pressure testing of filamentwound pressure vessels

Publish Date: 1985-05-28

GB 12136-1989 Abolished

GB 12136-1989 Arrester for dissolved acetylene cylinders

Publish Date: 1989-12-29

GB/T 13003-1991 Replaced

GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders

Publish Date: 1991-04-03

GB/T 13005-1991 Replaced

GB/T 13005-1991 Terminology of gas cylinders

Publish Date: 1991-04-30

GB 13076-1991 Replaced

GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders

Publish Date: 1991-07-12

GB 13077-1991 Replaced

GB 13077-1991 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders

Publish Date: 1991-07-12