GB/T 40823-2021 Active National standards

GB/T 40823-2021 Compact equipment assembly for distribution substation(CEADS)

GB/T 40823-2021 Compact equipment assembly for distribution substation(CEADS)

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 40823-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: High-voltage switchgear
ICS Name: High-voltage switchgear and controllers
Publish Date: 2021-10-11
Implement Date: 2022-05-01
Pages: 71 pages

Scope

This document specifies the conditions of use, rated values, design and structure, testing, and selection guidelines for compact integrated equipment used in distribution substations.
This document applies to compact integrated equipment consisting of the main electrical functional units of high-voltage/low-voltage distribution substations with a rated frequency of 50 Hz and a rated AC voltage of 3.6 kV to 40.5 kV on the high-voltage side, equipped with appropriate internal connections. This integrated equipment can be connected to the power grid via cables and installed indoors or in enclosed electrical operation areas outdoors.
Compact integrated equipment with a rated AC voltage higher than 40.5 kV on the high-voltage side can refer to this document for guidance.
The compact integrated equipment for distribution substations (CEADS) defined in this document is designed and tested as an independent product, with a unique serial number and related supporting documents.
The functions of CEADS include:
——Opening and closing, and controlling the operation of the high-voltage circuit;
——Protecting the high-voltage/low-voltage transformer functional units;
——High-voltage/low-voltage conversion;
——Opening and controlling the operation and protection of the low-voltage feeder circuit.
The relevant provisions in this document also apply to designs that do not possess all of the above functions, but at least two of them, such as equipment composed solely of high-voltage/low-voltage conversion functions and opening and controlling the operation and protection of the low-voltage feeder circuit.
Note: For the purposes of this document, self-protecting transformers are not considered CEADS but their functional units, and they are designed and tested in accordance with their own product standard IEC 60076-13.

Development Information

Word Count: 139 Thousand words Pages: 71 pages

Referenced Standards

GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 4796-2001 Classification of environmental parameters and their severities of electric and electronic products GB/T 4796-2008 Classification of environmental conditions of electric and electronic products—Part 1:Environmental parameters and their severities GB/T 4796-2017 Classification of environmental conditions—Environmental parameters and their severities GB/T 4797.4-2006 Environmental conditions appearing in nature for electric and electronic products—Solar radiation and temperature GB/T 4797.4-2019 Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and temperature GB/T 4797.5-1992 Environmental conditions appearing in nature of electric and electronic products—Precipitation and wind GB/T 4797.5-2008 Classification of environmental conditions of electric and electronic products— Environmental conditions of nature—Precipitation and wind GB/T 4797.5-2017 Classification of environmental conditions—Environmental conditions appearing in nature—Precipitation and wind GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB 7251.2-1997 Low-voltage switchgear and control gear assemblies—Part 2:Particular requirements for busbar trunking systems(busways) GB 7251.2-2006 Low-voltage switchgear and controlgear assemblies—Part 2:Particular requirements for busbar trunking systems (busways) GB/T 7251.2-2023 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies GB 7251.3-1997 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards GB/T 7251.3-2006 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards GB/T 7251.3-2017 Low-voltage switchgear and controlgear assemblies—Part 3:Distribution boardsintended to be operated by ordinary persons(DBO) GB 7251.4-1998 Low-voltage switchgear and control gear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS) GB/T 7251.4-2006 Low-voltage switchgear and control gear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS) GB/T 7251.4-2017 Low-voltage switchgear and controlgear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS) GB 7251.5-1998 Low-voltage switchgear and control gear assemblies—Part 5:Particular requirements for assemblies intended to be installed outdoors in public places—Cable distribution cabinets (CDCs)for power distribution in networks GB/T 7251.5-2008 Low-voltage switchgear and controlgear assemblies—Part 5:Particular requirements for assemblies for power distribution in public networks GB/T 7251.5-2017 Low-voltage switchgear and controlgear assemblies—Part 5:Assemblies for power distribution in public networks GB/T 7251.5-2025 Low-voltage switchgear and controlgear assemblies—Part 5:Assemblies for power distribution in public networks GB/T 7251.6-2015 Low-voltage switchgear and controlgear assemblies—Part 6:Busbar trunking systems(busways) GB/T 7251.7-2015 Low-voltage switchgear and controlgear assemblies—Part 7:Assemblies for specific applications such as marinas,camping sites,market squares,electric vehicles charging stations GB/T 7251.7-2025 Low-voltage switchgear and controlgear assemblies—Part 7:Assemblies for specific applications such as marinas,camping sites,market squares,electric vehicle charging stations GB/T 7251.8-2005 Low-voltage switchgear and controlgear assemblies—General technology requirement for intelligent assemblies GB/T 7251.8-2020 Low-voltage switchgear and controlgear assemblies—Part 8:General technical requirements for intelligent assembly GB/T 7251.10-2014 Low-voltage switchgear and controlgear assemblies—Part 10:Guidance to specifying assemblies GB/T 7251.10-2025 Low-voltage switchgear and controlgear assemblies—Part 10:Guidance to specifying assemblies GB/T 7251.12-2013 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB/T 7251.12-2013 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards GB/T 13540-1992 Anti-seismic characteristic test for high-voltage switchgear GB/T 13540-2009 Seismic qualification for high-voltage switchgear and controlgear GB/T 14048.1-2012 Low-voltage switchgear and controlgear—Part 1:General rules GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 17467-2020 High-voltage/low-voltage prefabricated substation GB/T 18859-2016 Enclosed low-voltage switchgear and controlgear assemblies—Guide for testing under conditions of arcing due to internal fault GB/T 20002.4-2015 Drafting for special aspects in standards—Part 4:Safety aspects for their inclusion in standards GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) GB/T 26218.1-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 1:Definitions,information and general principles GB/T 26218.2-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 2:Ceramic and glass insulators for a.c.systems GB/T 26218.3-2011 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 3:Composite insulators for a.c.systems GB/T 26218.4-2019 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions—Part 4:Insulators for d.c. systems GB/T 33977-2017 Methods to quantify the steady state,power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations GB/T 36271.1-2018 Power installations exceeding 1 kV a.c.—Part 1:Common rules IEC 60076-13

Adopt standards

IEC 62271-212:2016

Related Standards

Contact Us