GB/T 37995-2019
Active
National standards
GB/T 37995-2019 Rubber ring of main drive chain for wind turbine generator system
GB/T 37995-2019 Rubber ring of main drive chain for wind turbine generator system
Basic Information
Standard Code:
GB/T 37995-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nRubber seals
ICS Name:
Sealing components
Publish Date:
2019-08-30
Implement Date:
2020-07-01
Pages:
19 pages
Scope
This standard specifies the terms and definitions, symbols, structural types, and installation grooves for rubber sealing rings used in the main drive chain systems of wind turbines, as well as their requirements, test methods, inspection rules, marking, packaging, storage, and transportation.
This standard applies to unprotected lip rotating shaft lip sealing rings, protected lip rotating shaft lip sealing rings, shaped dustproof rings, single-type end face V-rings, and assembled end face V-rings (hereinafter collectively referred to as sealing rings) used in the main drive chain systems of wind turbines with shaft diameters ranging from 400 mm to 3,920 mm and corresponding cavity hole diameters ranging from 444 mm to 4,000 mm.
Development Information
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 529-1999 Rubber,vulcanized or thermoplastic—Determination of tear strength (Trouser,angle and crescent test pieces)
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 532-1997 Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric
GB/T 532-2008 Rubber,vulcanized or thermoplastic—Determination of adhesion to textile fabric
GB/T 1682-1994 Rubber, vulcanized—Determination of low-temperature brittleness(single test piece method)
GB/T 1682-2014 Rubber,vulcanized—Determination of low-temperature brittleness—Single test piece method
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 13871.2-2015 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 2:Vocabulary
GB/T 13871.5-2015 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 5:Identification of visual imperfections
GB/T 15326-1994 Appearance quality for rotary shaft lip seals
GB/T 16585-1996 Rubber, vulcanized—Test method of resistance to artificial weathering (Fluorescent UV lamp)
GB/T 17446-1998 Fluid power systems and components—Vocabulary
GB/T 17446-2012 Fluid power systems and components—Vocabulary
GB/T 17446-2024 Fluid power systems and components—Vocabulary
HG/T 2580-2022 Determination of tensile strength and elongation at break of rubber or plastic-coated fabrics
HG/T 2729-2012 The determination of friction coefficient of vulcanized rubber and thin sheets using sliding method
HG/T 2580-2008 Rubber or plastic-coated fabric - Determination of tensile strength and elongation at break
HG/T 2729-1995 The coefficient of friction between sulfurized rubber and thin sheets
HG/T 2580-1994 Determination of tensile strength and tensile extension of rubber or plastic coated fabrics
GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
Related Standards
GB/T 16593-1996
Replaced
GB/T 10708.1-2000
Active
GB/T 10708.1-2000 Reciprocating rubber seals—Types, dimensions and tolerances—Part 1:Rubber seals on one-way
GB/T 10708.2-2000
Active
GB/T 10708.2-2000 Reciprocating rubber seals—Types, dimensions and tolerances—Part 2:Rubber seals on two-way
GB/T 10708.3-2000
Active
GB/T 10708.3-2000 Reciprocating rubber seals—Types, dimensions and tolerances—Part 3:Rubber dust seals
JG/T 141-2001
Active
JG/T 141-2001 Water-swellable waterstops band made from bentonite and rubber
GB/Z 19848-2005
Active