GB 23826-2025 Active National standards force_standard

GB 23826-2025 Light-emitting diode variable speed limit signs of motorway

GB 23826-2025 Light-emitting diode variable speed limit signs of motorway

Publish Date: 2025-04-25 Implement Date: 2025-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 23826-2025
Standard Type: National standards
Standard Status: Active
is_force_gb: yes
CCS Name: \nTraffic information management
ICS Name: Road transport
Publish Date: 2025-04-25
Implement Date: 2025-11-01
Pages: 36 pages

Scope

This document specifies the composition, classification, and models of LED variable speed limit signs for highways, as well as their technical requirements, inspection rules, and marking, packaging, transportation, and storage. It also describes the testing methods.
This document is applicable to the production and quality inspection of LED variable speed limit signs for highways.

Development Information

Word Count: 55 Thousand words Pages: 36 pages

Replace the following standards

Referenced Standards

GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature GB/T 3681.1-2021 Plastics—Methods of exposure to solar radiation—Part 1:General guidance GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate GB 5768.2-2009 Road traffic signs and markings—Part 2:Road traffic signs GB 5768.2-2022 Road traffic signs and markings—Part 2:Road traffic signs GB/T 7922-2003 Method of measuring the color of light sources GB/T 7922-2008 Method of measuring the color of light sources GB/T 7922-2023 Method of measuring color of light sources GB/T 9254.2-2021 Information technology equipment,multimedia equipment and receivers—Electromagnetic compatibility—Part 2:Immunity requirements GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 18802.11-2020 Low-voltage surge protective devices (SPD)—Part 11:Surge protective devices connected to low-voltage power systems—Requirements and test methods GB/T 22040-2008 Technical requirements and determination of weathering quality for plastics of highway furnatures GB/T 23828-2009 Light-emitting diode changeable message signs of expressway GB/T 23828-2023 Light-emitting diode changeable message signs of motorway GB/T 34428.1-2017 Communication rules of the devicesof surveillance and control system for expressway—Part 1:Universal rules GB/T 34428.3-2017 Communication rules of the devices of surveillance and control system for expressway—Part 3:LED changeable message sign GB/T 22040-2025 Technical requirements and test of weathering quality for plastics of highway furnatures GB/T 191-2025 Graphical symbols marking for handling and storage of packages

Related Standards

Contact Us