GB 10395.6-2025 Agricultural machinery—Safety—Part 6:Equipment for crop protection

Scope

This document, together with GB 10395.1, specifies the safety requirements and verification methods related to the design and manufacture of plant protection machinery used for applying pesticides and spraying liquid fertilizers. This document also stipulates the types of information manufacturers should provide regarding safe operating procedures (including residual risks).
When the provisions of this document are inconsistent with those of GB 10395.1, the provisions of this document shall take precedence over those of GB 10395.1 for machines designed and manufactured in accordance with this document.
This document, together with GB 10395.1, provides information on major hazards, dangerous states, and dangerous events that may occur during intended use under the manufacturer's specified conditions (see Appendix A), except for those caused by the following factors:
—— Environmental factors other than noise;
—— Power-transmitting moving parts beyond the strength requirements of protective devices and barriers.
This document applies to manual and motorized plant protection machinery used for applying pesticides and spraying liquid fertilizers (hereinafter collectively referred to as "pesticides"), including sprayers, powder sprayers, smoke machines, and liquid fertilizer sprayers (hereinafter referred to as "plant protection machinery" or "machines"), but does not apply to manned and unmanned aerial spraying systems.
This document does not apply to plant protection machinery manufactured before the implementation date.

Development Information

Same series standard

Replace the following standards

Referenced Standards

Related Standards