Standards

DB35/T 1660-2017 Abolished

DB35/T 1660-2017 Organic heat carrier boiler and system cleaning technical specifications

This standard specifies the terms and definitions, general requirements, operating procedures, cleaning quality, waste liquid treatment, and safety requirements for the cleaning of organic heat carrier boilers and systems. This standard applies to the cleaning of organic heat carrier boilers and systems with an outlet pressure greater than or equal to 0.1 MPa (gauge pressure) and a rated power greater than or equal to 0.1 MW, but does not apply to the cleaning of boilers with acid wash. This standard involves certain hazardous substances, operations, and equipment, and does not intend to provide recommendations on all safety issues related to them. Therefore, users should establish appropriate safety and protection measures and determine applicable management systems before using this standard.

Publish Date: 2017-05-05

DB35/T 1658-2017 Abolished

DB35/T 1658-2017 Adhesive-backed paper veneer laminate board

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of composite solid wood panels with impregnated film paper veneers. This standard applies to decorative panels composed of solid wood panels as the base material and impregnated film paper veneers as the decorative surface layer.

Publish Date: 2017-05-05

DB35/T 1620-2016 Abolished

DB35/T 1620-2016 Life uses dry paper wiping film made of blown polyethylene (CPE) packaging membrane

This standard specifies the raw material requirements, specifications, test methods, inspection rules, marking, packaging, transportation, and storage for CPE packaging films used for household dry tissues. This standard applies to CPE films used for household dry tissues, which are mainly made from polyethylene resin and formed through extrusion and printing processes.

Publish Date: 2016-12-30

DB35/T 1592-2016 Abolished

DB35/T 1592-2016 Lightweight reinforced wooden decorative board technical specification

This standard specifies the terms and definitions, classification, requirements, inspection methods, inspection rules, and marking, packaging, transportation, and storage for lightweight reinforced wooden decorative panels. This standard applies to lightweight reinforced wooden decorative panels that use fiberboard with a density of 0.60 g/cm3 to 0.80 g/cm3 as the base material and impregnated film paper as the decorative material.

Publish Date: 2016-08-22

DB35/T 1051-2016 Abolished

DB35/T 1051-2016 The classification and evaluation of service quality levels for rural tourism businesses in Fujian Province

This standard amends the terms, definitions, general principles, grade markings and scoring requirements, and grading criteria for the service quality grading and evaluation of rural tourism operators in Fujian Province. This standard applies to entities engaged in various rural tourism operations, including rural scenic spots surrounding tourist attractions in Fujian Province, historic and cultural towns and villages, rural tourism leisure towns, and characteristic villages.

Publish Date: 2016-06-28

DB35/T 1583-2016 Abolished

DB35/T 1583-2016 Residential community security prevention system technical specifications

This standard specifies the basic requirements for the security prevention system of residential communities, and it is the basic basis for the design of the security prevention system of residential communities, the construction of the project, the inspection of the system, and the acceptance of the completed project. This standard applies to new, renovated, and expanded residential communities, as well as to single (multiple) independent residential buildings. The renovation and upgrading of the security prevention systems of existing residential communities and residential buildings should be carried out in accordance with this standard.

Publish Date: 2016-04-06

DB35/T 1534-2015 Abolished

DB35/T 1534-2015 wood rosin oil

This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of wood turpentine oil. This standard applies to wood turpentine oil obtained by distilling tar derived from wood raw materials through processes such as distillation, alkali treatment, neutralization, and rectification.

Publish Date: 2015-12-28

DB35/T 1550-2015 Abolished

DB35/T 1550-2015 Indoor Fitness Services Standards

This standard specifies the service categories, environment and hardware facilities, personnel requirements, reception process, service norms, safety assurance, complaint handling, and supervision and management of fitness institutions. This standard applies to indoor fitness institutions with a business area of no less than 1,500 square meters.

Publish Date: 2015-12-28

DB35/T 1504-2015 Abolished

DB35/T 1504-2015 DB35/T 1504-2015 Double-sided Clothing General Technical Requirements

This standard specifies the technical requirements for double-sided wearable garments, including testing methods, inspection and judgment rules, product usage instructions, packaging, transportation, and storage. This standard applies to the quality assessment of double-sided wearable garments made primarily from textile fabrics, including garments with both sides made from woven fabrics, garments with both sides made from knitted fabrics, and garments with one side made from woven fabrics and the other side made from knitted fabrics, such as double-sided jackets, double-sided coats, double-sided cotton jackets, and double-sided down jackets. This standard does not apply to infant and toddler garments for children aged 36 months and below.

Publish Date: 2015-06-26

DB35/T 1495-2015 Abolished

DB35/T 1495-2015 LED lighting for mine lighting technical specifications

This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of LED lamps used for mine lighting (hereinafter referred to as "lamps"). This standard applies to LED lamps used for lighting in workfaces, roadways, chambers, and mobile equipment in mines with the risk of flammable gas or dust explosions, but it does not apply to mine safety helmet lamps.

Publish Date: 2015-02-28

DB35/T 1494-2015 Abolished

DB35/T 1494-2015 LED Road Light Intelligent Lighting Control System Technical Specification

This standard specifies the terms and definitions, system architecture, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of LED road intelligent lighting control systems (hereinafter referred to as "control systems"). This standard applies to road intelligent lighting control systems that use LED lamps.

Publish Date: 2015-02-28

DB35/T 876-2015 Abolished

DB35/T 876-2015 Cabbage cultivation techniques specifications

This standard specifies the terms and definitions, environmental conditions of the growing area, cultivation techniques, and harvesting for the cultivation of headed cabbage. This standard applies to the cultivation of headed cabbage.

Publish Date: 2015-02-28