GB 6932-2001
Replaced
T/CECS 10114-2021
Active
Group standards
T/CECS 10114-2021 Reinforced high density polyethylene(HDPE-IW) hexagonal structural
T/CECS 10114-2021 Reinforced high density polyethylene(HDPE-IW) hexagonal structural
Price:
$ 32.00
Basic Information
Standard Code:
T/CECS 10114-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating, gas supply, air conditioning, and refrigeration engineering
ICS Name:
The facilities in the building
Publish Date:
2021-01-05
Implement Date:
2021-06-01
Pages:
24 pages
Scope
This document specifies the materials, classification and marking, pipe structure and connection methods, requirements, test methods, inspection rules, marking, transportation, and storage for reinforced high-density polyethylene (HDPEIW) hexagonal structured wall pipes. This document is applicable to the production, manufacture, and inspection of reinforced high-density polyethylene (HDPEIW) hexagonal structured wall pipes used in underground drainage, sewage disposal, and communication sheathing pipes at operating temperatures below 45°C for long-term use.
Development Information
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1843-1996 Plastics—Determination of izod impact strength
GB/T 1843-2008 Plastics—Determination of izod impact strength
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 8806-1988 Method for dimension measuring of plastic pipes
GB/T 9341-2000 Plastics—Determination of flexural properties
GB/T 9341-2008 Plastics—Determination of flexural properties
GB/T 9647-2003 Thermoplastics pipes—Determination of ring stiffness
GB/T 9647-2015 Thermoplastics pipes—Determination of ring stiffness
GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method
GB/T 18042-2000 Thermoplastics pipes—Determination of creep ratio
GB/T 19278-2018 General terms and their definitions of thermoplastic pipes,fittings and valves
GB/T 19466.6-2009 Plastics—Differential scanning calorimetry(DSC)—Part 6:Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT)
GB/T 19472.1-2019 Polyethylene structure wall pipeline system for underground usage—Part 1:Polyethylene double wall corrugated pipes
GB/T 21873-2008 Rubber seals—Joint rings for water supply,drainage and sewerage pipelines—Specification for materials
GB/T 21873-2025 Rubber seals—Joint rings for water supply,drainage and sewerage pipelines—Specification for materials
Related Standards
GB/T 19249-2003
Replaced
GB/T 19249-2003 Reverse osmosis water treatment equipment
GB/T 19913-2005
Replaced
GB/T 19913-2005 Cast iron heating radiator
CJ/T 245-2007
Abolished
CJ/T 245-2007 Syphonic roof outlet
CJ/T 133-2007
Replaced
CJ/T 133-2007 Integrated circuit card water meter
CJ/T 241-2007
Active