GB/T 17211-1998
Replaced
DL/T 5555-2019
Active
Industry standards-Electricity
DL/T 5555-2019 Technical code for design of cross-sea overheadtransmission line
DL/T 5555-2019 Technical code for design of cross-sea overheadtransmission line
Price:
$ 30
Basic Information
Standard Code:
DL/T 5555-2019
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power transmission and transformation projects
ICS Name:
The transmission grid and the distribution grid
Publish Date:
2019-06-04
Implement Date:
2019-10-01
Pages:
170 pages
Scope
This standard is formulated to regulate the design of offshore overhead transmission lines, ensuring their safety, reliability, advanced applicability, economic rationality, resource conservation, and environmental friendliness. This standard applies to the design of offshore overhead transmission lines with voltages ranging from 110 kV to 500 kV.
Development Information
Referenced Standards
DL/T 1453-2015 DL/T 1453-2015 Iron Tower Anti-corrosion Protection Coating for Transmission Line Transitions
DL/T 5485-2013 Design Technical Regulations for Large Cross-over of 110kV~750kV Overhead Transmission Lines
GB 13476-1999 Pretensioned spun concrete piles
GB/T 13476-2009 Pretensioned spun concrete piles
GB/T 13476-2023 Pretensioned spun concrete piles
GB 50011-2010 Code for seismic design of buildings
GB 50017-2017 Code for design of steel structures
GB 50026-2020 Code for engineering surveying
GB 50223-2008 Standard for classification of seismic protection of building constructions
GB 50545-2010 Code for design of 110kV~750kV overhead transmission line
GB 8076-1997 Concrete admixtures
GB 8076-2008 Concrete admixtures
GB/T 8076-2025 Concrete admixtures
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1771-1991 Paints and varnishes—Determination of resistance to neutral salt spray
GB/T 1771-2007 Paints and varnishes—Determination of resistance to neutral salt spray(fog)
GB/T 18365-2001 Technical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge
GB/T 18365-2018 Hot-extruded PE protection paralleled high strength wire cable for cable-stayed bridge
GB/T 1865-1997 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Filtered xenon-arc radiation
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB/T 4162-1991 Forged and rolled steel bars—Method for ultrasonic examination
GB/T 4162-2008 Forged and rolled steel bars—Method for ultrasonic testing
GB/T 4162-2022 Method for ultrasonic testing of forged and rolled steel bars
GB/T 4171-2000 Superior atmospheric corrosion resisting structural steel
GB/T 4171-2008 Atmospheric corrosion resisting structural steel
GB/T 50082
GB/T 5210-1985 Determination of adhesion of coats—Pull-off test
GB/T 5210-2006 Paints and varnishes—Pull-off test for adhesion
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 7788-1987 General specification for anodic shield coating of ship and ocean engineering
GB/T 7788-2007 General specification for anodic shield coating of ship and marine engineering
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 2:Preparation grades of previously coated steelsubstrates after localized removal of previous coatings
GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 3:Preparation grades of welds,edges and other areas with surface imperfections
GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing
JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing
JB/T 4730.6-2005 Nondestructive testing of pressure equipments—Part 6:Eddy current testing
JGJ/T 192-2009 Technical specification for application of corrosion inhibitor for steel bar
JT/T 695-2007 Concrete bridge structure surface coating anti-corrosion technical specification
JT/T 695-2026 Road bridge concrete structure anti-corrosion coating
JT/T 722-2023 Highway bridge steel structure anti-corrosion coating technical specifications
JT/T 722-2008 Specifications of protective coating for highway bridge steel structure
JTJ 275
JTS 131
JTS 133-3-2010 Code for Geology Investigation of Waterway Engineering
JTS 144-1
JTS 145
JTS 146
JTS 151
JTS 152
JTS 153
JTS 153-3
JTS 167-3-2009 Code for Design and Construction for Quay Wall of Sheet Pile
JTS 202-2
JTS 215
JTS/T 236
Related Standards
GB/T 2900.52-2000
Replaced
GB/T 2900.52-2000 Electrotechnical terminology-Generation, transmission and distribution of electricity—Generation
GB/Z 24835-2009
Replaced
GB/Z 24835-2009 Regulation of operation and maintenance for 1 000 kV gas-insulated metal-enclosed switchgear
GB/Z 24842-2009
Replaced
GB/Z 24842-2009 Overvoltage and insulation coordination of 1000 kV UHV AC transmission project
GB/Z 24843-2009
Replaced
GB/Z 24843-2009 Technical specification of 1 000 kV single phase oil-immersed auto-transformer
GB/Z 24846-2009
Replaced