GB/T 16427-1996
Replaced
QC/T 1251-2025
Pending
Industry standards-Car
QC/T 1251-2025 Heavy duty hose clamps for automobile
QC/T 1251-2025 Heavy duty hose clamps for automobile
Basic Information
Standard Code:
QC/T 1251-2025
Standard Type:
Industry standards
Standard Status:
Pending
is_force_gb:
no
CCS Name:
Lubrication parts, sealing parts, and connecting parts
ICS Name:
Road vehicle equipment
Publish Date:
2025-12-29
Implement Date:
2026-07-01
Publisher:
中华人民共和国工业和信息化部
Technical Committee:
全国汽车标准化技术委员会(SAT/TC 114)
Pages:
12 pages
Scope
本文件规定了汽车用强力软管夹箍（以下简称“夹箍”）的型式尺寸、技术要求、夹箍装配扭矩、产品编号，描述了相应的试验方法。
本文件适用于传输气体或液体的软管和硬管的连接密封夹箍。
Development Information
Drafting Units:
浙江亚太智能网联汽车创新中心有限公司、宁波长乐喉箍有限公司、天津凯诺实业有限公司、北汽集团北京汽车总院有限公司、中国重汽集团股份有限公司、浙江捷能汽车零部件有限公司、杭州职业技术学院、浙江工业大学、杭州云栖智能汽车创新中心、浙江大学、红骐科技(杭州)有限公司
Drafting Persons:
杨爱喜、张泽、张启智、栾俭新、王鹏、郭抚顺、李兰友、刘振、胡双全、赵国利、胡松钰、陈杰
Referenced Standards
GB/T 90.1-2002 Fasteners—Acceptance inspection
GB/T 90.1-2023 Fasteners—Acceptance inspection
GB/T 90.2-2002 Fasteners—Marking and packaging
GB/T 1800.2-1998 Limits and fits—Bases—Part 2:Basic rules of tolerances, deviations and fits
GB/T 1800.2-2009 Geometrical Product Specifications (GPS)—Limits and fits—Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts
GB/T 2671.2-2004 Hexalobular socket head cap screws
GB/T 2671.2-2017 Hexalobular socket head cap screws
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.6-2000 Mechanical properties of fasteners—Bolts, screws and studs made of stainless-steel
GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs
GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts,screws and studs
GB/T 3280-1992 Cold rolled stainless steel sheets and plates
GB/T 3280-2007 Cold rolled stainless steel plate, sheet and strip
GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip
GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners
GB/T 6478-2001 Steels for cold heading and cold extruding
GB/T 6478-2015 Steels for cold heading and cold extruding
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
QC/T 326-2013 Car standard parts product numbering rules
QC/T 326-2025 Numbering rules for automotive standardized parts
QC/T 625-2024 Metallic coatings and conversion coatings for automobile
QC/T 625-2013 Car coating and plating layers and chemical treatment layers
ISO 4954
Related Standards
GB 11557-1998
Replaced
GB 11557-1998 The stipulation protecting drivers from being injured by motor vehicle steering mechanism
GB 17354-1998
Replaced
GB 17354-1998 Front and rear protective devices for passenger cars
GB/T 17351-1998
Abolished
GB/T 17351-1998 Dual spacing of vechicle wheels
GB 5763-1998
Replaced
GB 5763-1998 Brake linings for automobiles
GB/T 17469-1998
Replaced