GB/T 2521-1996
Replaced
GB/T 14986.1-2025
Active
National standards
GB/T 14986.1-2025 Soft magnetic alloys—Part 1:General requirements
GB/T 14986.1-2025 Soft magnetic alloys—Part 1:General requirements
Basic Information
Standard Code:
GB/T 14986.1-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Precision alloys
ICS Name:
Special magnetic steel
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国钢标准化技术委员会(SAC/TC 183)
Pages:
24 pages
Scope
本文件给出了软磁合金的分类和符号,规定了订货内容、制造工艺、技术要求、检验规则、包装、标志、贮存和质量证明书,描述了相应的试验方法。
本文件适用于软磁合金的冷轧带材、冷轧板材、冷拉丝材、冷拔(轧)管材、热轧圆盘条、热轧板材、热轧(锻)棒材和车光或磨光棒材(以下简称合金材)。
Development Information
Drafting Units:
东北特殊钢集团股份有限公司、钢铁研究总院有限公司、安泰科技股份有限公司、冶金工业信息标准研究院、西安钢研功能材料股份有限公司、抚顺特殊钢股份有限公司、浙江青山钢铁有限公司、成都凯天电子股份有限公司
Drafting Persons:
王连超、栗生宝、于一鹏、王姝、李继、张佳维、李立、王琳、李新宇、朱亚辉、颜丞铭、张翠梅、马静、李飞扬、王贝贝、刘军凯
Same series standard
Replace the following standards
Referenced Standards
GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.6-1994 Methods for chemical analysis of iron, steel and alloy—The neutralization titrimetric method for the determination of boron content
GB/T 223.6-2025 Iron,steel and alloy—Determination of boron content—Neutralization titrimetric method and spectrophotometric method
GB/T 223.7-2002 Iron powder—Determination of iron content—Potassium dichromate titration method
GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.10-2000 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
GB/T 223.12-1991 Methods for chemical analysis of iron, steel and alloy—The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.16-1991 Methods for chemical analysis of iron, steel and alloy—The chromotropic acid photometric method for the determination of titanium content
GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.21-1994 Methods for chemical analysis of iron, steel and alloy The 5-Cl-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22-1994 Methods for chemical analysis of iron, steel and alloy The nitroso-R-salt spectrophotometric method for the determination of cobalt content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.24-1994 Methods for chemical analysis of iron, steel and alloy The extraction separation—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.27-1994 Methods for chemical analysis of iron, steel and alloy The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.30-1994 Methods for chemical analysis of iron, steel and alloy The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.31-1994 Methods for chemical analysis of iron, steel and alloy The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.31-2026 Iron, steel and alloy—Determination of arsenic content—Spectrophotometric method and iodimetric method
GB/T 223.32-1994 Methods for chemical analysis of iron, steel and alloy The hypophosphite reduction-iodimetric method for the determination of arsenic content
GB/T 223.33-1994 Methods for chemical analysis of iron, steel and alloy The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy—The determination of hydrochloric acid-insoluble content of iron powders
GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation
GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T 223.38-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 3658-1990 Soft magnetic alloys—Measuring method for alternative magnetic properties
GB/T 3658-2008 Methods of measurement of a.c.magnetic properties of magnetically soft materials
GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 13012-1991 Solid steels—Methods of measurement of the d.c. magnetic properties
GB/T 13012-2008 Methods of measurement of d.c.magnetic properties of magnetically soft materials
GB/T 13297-2021 General rules of packaging,marking and quality certification for precision alloys
GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T 14981-2004 Dimensions,shape,mass and tolerances for hot-rolled wire rods
GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
Related Standards
GB/T 17951.2-2002
Replaced
GB/T 17951.2-2002 Cold-rolled grain non-oriented electrical steel strip (sheet) delivered in the semi-processed state
GB/T 19345-2003
Replaced
GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
GB/T 911-2004
Replaced
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 2521-2008
Active
GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip(sheet)
GB/T 6983-2008
Replaced