GB/T 2521-1996
Replaced
GB/T 14986.1-2018
Replaced
National standards
GB/T 14986.1-2018 Soft magnetic alloys—Part 1:General requirements
GB/T 14986.1-2018 Soft magnetic alloys—Part 1:General requirements
Basic Information
Standard Code:
GB/T 14986.1-2018
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Precision alloys
ICS Name:
Special magnetic steel
Publish Date:
2018-05-14
Implement Date:
2019-02-01
Pages:
24 pages
Scope
This part of GB/T 14986 specifies the terms and definitions, classification, order content, dimensions, shapes, weights, technical requirements, inspection rules, test methods, packaging, marking, and quality certificates for soft magnetic alloys. This part applies to cold-rolled strips, cold-rolled plates, cold-drawn wires, cold-drawn (rolled) tubes, warm-rolled strips, hot-rolled round bars, hot-rolled flat bars, and hot-rolled (forged) bars of soft magnetic alloys (hereinafter referred to as alloy materials). This part does not apply to amorphous and nanocrystalline soft magnetic alloy strips (see GB/T 19345).
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.6-1994 Methods for chemical analysis of iron, steel and alloy—The neutralization titrimetric method for the determination of boron content
GB/T 223.6-2025 Iron,steel and alloy—Determination of boron content—Neutralization titrimetric method and spectrophotometric method
GB/T 223.7-2002 Iron powder—Determination of iron content—Potassium dichromate titration method
GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.10-2000 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
GB/T 223.12-1991 Methods for chemical analysis of iron, steel and alloy—The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.16-1991 Methods for chemical analysis of iron, steel and alloy—The chromotropic acid photometric method for the determination of titanium content
GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.21-1994 Methods for chemical analysis of iron, steel and alloy The 5-Cl-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22-1994 Methods for chemical analysis of iron, steel and alloy The nitroso-R-salt spectrophotometric method for the determination of cobalt content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.24-1994 Methods for chemical analysis of iron, steel and alloy The extraction separation—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.27-1994 Methods for chemical analysis of iron, steel and alloy The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.30-1994 Methods for chemical analysis of iron, steel and alloy The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.31-1994 Methods for chemical analysis of iron, steel and alloy The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.31-2026 Iron, steel and alloy—Determination of arsenic content—Spectrophotometric method and iodimetric method
GB/T 223.32-1994 Methods for chemical analysis of iron, steel and alloy The hypophosphite reduction-iodimetric method for the determination of arsenic content
GB/T 223.33-1994 Methods for chemical analysis of iron, steel and alloy The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy—The determination of hydrochloric acid-insoluble content of iron powders
GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation
GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T 223.38-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 3658-1990 Soft magnetic alloys—Measuring method for alternative magnetic properties
GB/T 3658-2008 Methods of measurement of a.c.magnetic properties of magnetically soft materials
GB/T 3658-2022 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
GB/T 14981-2004 Dimensions,shape,mass and tolerances for hot-rolled wire rods
GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
YB/T 5242-2013 General regulations for packaging, labeling, and quality certificate of precision alloys
Related Standards
GB/T 17951.2-2002
Replaced
GB/T 17951.2-2002 Cold-rolled grain non-oriented electrical steel strip (sheet) delivered in the semi-processed state
GB/T 19345-2003
Replaced
GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
GB/T 911-2004
Replaced
GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
GB/T 2521-2008
Active
GB/T 2521-2008 Cold-rolled grain-oriented and non-oriented electrical steel strip(sheet)
GB/T 6983-2008
Replaced