GB/T 16762-1997
Replaced
GB/T 20492-2019
Active
National standards
GB/T 20492-2019 Zinc-5% aluminum-mixed mischmetal alloy-coated steel wireand steel wire strand
GB/T 20492-2019 Zinc-5% aluminum-mixed mischmetal alloy-coated steel wireand steel wire strand
Basic Information
Standard Code:
GB/T 20492-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wire, steel wire rope
ICS Name:
Wire, steel wire rope, and link chains
Publish Date:
2019-03-25
Implement Date:
2020-02-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国钢标准化技术委员会(SAC/TC 183)
Pages:
22 pages
Scope
本标准规定了锌5%铝混合稀土合金镀层钢丝(以下简称钢丝)、钢绞线(以下简称钢绞线)的分类、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于制造架空绞线用钢丝;适用于架空电力地线、通讯电缆、吊架、悬挂、栓系及固定物件等用的钢绞线。该合金镀层产品适用于要求耐腐蚀、承受拉力等工作场合。注: 本标准第3章~第9章规定了钢丝的技术指标,第10章~第16章规定了钢绞线的技术指标。
Development Information
Drafting Units:
天津冶金钢线钢缆集团有限公司、天津市盖尔发金属制品有限公司、锦锐乾源通信设备科技有限公司、河北鸿翔电讯器材有限公司、冶金工业信息标准研究院
Drafting Persons:
张建国、翟巧玲、任翠英、王志永、王玲君、高利辉、王俊、顾树池、马永德、王琦、曹倍倍、刘伟、冷明鉴
Replace the following standards
Referenced Standards
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 701-1997 Hot-rolled low carbon steel wire rods
GB/T 701-2008 Hot rolled low carbon steel wire rods
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2103-1988 General provisions for checking, packing, marking and quality certification of steel wire
GB/T 2103-2008 General requirements for acceptance,packing,marking and quality certification of steel wire
GB/T 2104-1988 Steel wire ropes—Packing, marking and certificate—General requirements
GB/T 2104-2008 Steel wire ropes—Packing,marking and certificate—General requirements
GB/T 2972-1991 Zinc-coated steel wire—Test method for uniformity of zinc coating on wire by the copper sulphate dip
GB/T 2972-2016 Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 4354-1994 Hot-rolled quality carbon steel wire rods
GB/T 4354-2008 Hot rolled quality carbon steel wire rods
GB/T 8358-1987 Method of breaking tensile test for steel wire ropes
GB/T 8358-2006 Method of breaking tensile test for steel wire ropes
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
GB/T 8358-2023 Steel wire ropes—Determination of breaking force
GB/T 21839-2008 Steel for prestressed concrete—Test methods
GB/T 21839-2019 Test methods of steel for prestressing concrete
GB/T 24242.2-2009 Non-alloy steel wire rods for conversion to wire—Part 2:Specific requirements for general purpose wire rod
GB/T 24242.2-2020 Non-alloy steel wire rod for conversion to wire—Part 2:Specific requirements for general purpose wire rod
YB/T 081-1996 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
YS/T 310-1995 Zinc alloy for hot dip galvanizing
YS/T 310-2008 Zinc alloy ingot for hot dip galvanizing
YB/T 081-2013 Metallurgical technology standards for numerical rounding and determination of testing values
YB/T 5357-2019 Steel wire and its products with zinc or zinc aluminum plating coating
YB/T 5357-2009 Steel wire plating zinc or zinc-5% aluminum alloy
YS/T 310-2021 Galvanized Zinc Alloy Ingots for Hot Dipping
YB/T 5357-2006 Zinc coatings for steel wire
GB/T 4354-2025 Hot-rolled quality carbon steel wire rods
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2104-2025 General rules of packing, marking and quality certificate for steel wire ropes
Related Standards
GB/T 342-1997
Replaced
GB/T 342-1997 Dimension shape mass and tolerance for cold-drawn round square and hexagonal steel wires
MT 244.1-1997
Replaced
MT 244.1-1997 Car coupler of decauville for mine connecting chain
MT 244.2-1997
Replaced
MT 244.2-1997 Car coupler of decauville for mine—Connecting bolt
MT 716-1997
Replaced
MT 716-1997 Delivery requirements of wire ropes for mine hoisting
MT 717-1997
Active