GB/T 14627-1993
Replaced
GB/T 9652.1-2019
Active
National standards
GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
Basic Information
Standard Code:
GB/T 9652.1-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nHydraulic turbines and their auxiliary equipment
ICS Name:
Hydraulic engineering
Publish Date:
2019-06-04
Implement Date:
2020-01-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国水轮机标准化技术委员会 (SAC/TC 175)
Pages:
16 pages
Scope
GB/T 9652的本部分规定了水轮机调速系统的工作条件、技术要求、供货范围和备品备件、图纸与资料、铭牌、包装、运输与储存、保证期等要求。
本部分适用于水轮机调速系统(包括水泵水轮机调速系统)的设计、制造、验收。
Development Information
Drafting Units:
天津电气科学研究院有限公司、中国水利水电科学研究院自动化研究所、三峡水力发电厂、东方电机控制设备有限公司、中国水电顾问集团华东勘测设计研究院、国电南瑞科技股份有限公司、长江勘测规划设计研究有限责任公司、武汉国测三联水电设备有限公司、中国大唐集团科学技术研究院有限公司水电科学研究院、武汉大学、西安理工大学
Drafting Persons:
刘卫亚、张建明、邵宜祥、潘熙和、刘安平、程远楚、余志强、邬廷军、南海鹏、张新华
Same series standard
Replace the following standards
Referenced Standards
GB 11120-2011 Lubricating oils for turbines
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 150.2-2011 Pressure vessels—Part 2:Materials
GB/T 150.2-2024 Pressure vessels—Part 2:Materials
GB/T 150.3-2011 Pressure vessels—Part 3:Design
GB/T 150.3-2024 Pressure vessels—Part 3:Design
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 3047.1-1995 Series of basic dimensions of panels, rack and cabinets for vertical increment of 20mm
GB/T 3797-2005 Electrical control assemblies
GB/T 3797-2016 Electrical control assemblies
GB/T 4588.1-1996 Sectional specification:single and double sided printed boards with plain holes
GB/T 4588.2-1996 Sectional specification:single and double sided printed boards with plated-through holes
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB/T 10886-2002 Three screw pumps
GB/T 10886-2019 Three screw pumps
GB/T 11805-1999 Basic specifications of automatic control components(devices) and their related system for hydroturbine-generating sets
GB/T 11805-2008 Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets
GB/T 11805-2019 General specifications of automatic control components(devices)and their related system for hydroturbine-generating sets
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 20663-2006 Bladder type accumulators
GB/T 20663-2017 Accumulators
GB/T 25133-2010 Hydraulic fluid power systems—Assembled systems—Methods of cleaning lines by flushing
DL/T 1245-2013 The guidelines for the operation of the hydrogenerator regulation system in parallel operation
JB/T 7036-2006 Hydraulic isolation accumulator technical specification
JB/T 7041-2006 Hydraulic Gear Pump
JB/T 7041.1-2023 Hydraulic Pump - Part 1: Blade Pump
JB/T 7041.2-2020 Hydraulic Pump - Part 2: Gear Pump
JB/T 7041.3-2023 Hydraulic Pump - Part 3: Axial Piston Pump
JB/T 8091-2014 Screw pump test method
JB/T 8091-1998 JBT 8091-1998 Screw Pump Test Method
JB/T 7036-1993
JB/T 7041-1993
JB/T 4711-2003 Coating and packing for pressure vessels transport
DL/T 1245-2024 Guidance for the operation of hydrogenerator regulation system in parallel operation
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 20663-2026 Accumulators
Adopt standards
IEC 61362:2012
Related Standards
GB/T 15468-1995
Replaced
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15469-1995
Replaced
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15613-1995
Replaced
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 16166-1996
Replaced
GB/T 16166-1996 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
GB/T 10969-1996
Replaced