GB 13236-1991
Replaced
GB/T 9081-2008
Replaced
National standards
GB/T 9081-2008 Fuel dispensers for motor vehicles
GB/T 9081-2008 Fuel dispensers for motor vehicles
Basic Information
Standard Code:
GB/T 9081-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nSigns, packaging, transportation, storage
ICS Name:
Petroleum, petroleum products, and natural gas storage and transportation equipment
Publish Date:
2008-06-26
Implement Date:
2009-01-01
Pages:
18 pages
Scope
This standard specifies the technical requirements, inspection items and methods, inspection rules, and requirements for marking, sealing, packaging, transportation, and storage of motor vehicle fuel dispensers (hereinafter referred to as dispensers). This standard applies to the design, manufacture, and acceptance of dispensers.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 3768-1996 Acoustics—Determination of sound power levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
GB 4943-2001 Safety of information technology equipment
GB 10543-2003 Rubber hose and hose assemblies for aircraft ground fuelling and defuelling
GB 50058-1992
JJG 443-2006 Fuel Dispensers
JTG B01-2003
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.3-2000 Electrical apparatus for explosive gas atmospheres—Part 3:Increased safety “e”
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.9-2006 Electrical apparatus for explosive gas atmospheres—Part 9:Encapsulation "m"
GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m”
GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m”
GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres—Part 15:Electrical installations in hazardous areas (other than mines)
GB/T 3836.15-2017 Explosive atmospheres—Part 15:Electrical installations design,selection and erection
GB 3836.15-2024 Explosive atmospheres—Part 15:Specification of electrical installations design,selection and erection
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
Related Standards
GB/T 16544-1996
Replaced
GB/T 16544-1996 Spherical tank—Radiographic method of gamma ray panoramic exposure
GB/T 9711.2-1999
Replaced
GB/T 9711.2-1999 Petroleum and natural gas industries—Steel pipe for pipelines—Technical delivery conditions—Part 2:Pipes of requirement class B
GB/T 9081-2001
Replaced
GB/T 9081-2001 Fuel dispensers for motor vehicles
GB/T 10546-2003
Replaced
GB/T 10546-2003 Rubber hoses and hose assemblies for liquefied petroleum gases(LPG)—Bulk transfer application
GB/T 9711.3-2005
Replaced