GB 5590-1985
Replaced
GB 3836.9-2014
Replaced
National standards
force_standard
GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m”
GB 3836.9-2014 Explosive atmospheres—Part 9:Equipment protection by type of protection “m”
Basic Information
Standard Code:
GB 3836.9-2014
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
yes
CCS Name:
Explosion-proof electrical appliances
ICS Name:
Electric equipment for use in explosive environments
Publish Date:
2014-12-05
Implement Date:
2015-10-16
Pages:
25 pages
Scope
This part of GB 3836 specifies the special requirements for the structure, testing, and marking of electrical equipment, electrical equipment components, and Ex components protected by potting type "m" for use in explosive gas environments and explosive dust environments.
This part is only applicable to potting type electrical equipment with a rated voltage not exceeding 11 kV, potting components of electrical equipment, and potting Ex components (hereinafter collectively referred to as "m" equipment).
Electrical equipment used in environments where explosive gases and combustible dust may occur simultaneously may require additional protective measures.
This part does not apply to pyrophoric explosive dust that burns without the need for oxygen in the atmosphere, nor to self-igniting substances.
This part does not consider the hazards posed by combustible gases or toxic gases released from dust.
This part is a supplement and modification to the general requirements of GB 3836.1—2010. If there are conflicts between the requirements of this part and those of GB 3836.1—2010, the requirements of this part shall prevail.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1034-2008 Plastics—Determination of water absorption
GB/T 1408.1-2006 Electrical strength of insulating materials—Test methods—Part 1:Tests at power frequencies
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n”
GB 3836.20-2010 Explosive atmospheres—Part 20:Equipment with equipment protection level (EPL) Ga
GB/T 7153-2002 Directly heated positive step-function temperature coefficient thermistors—Part 1:Generic specification
GB/T 9816.1-2013 Thermal-links—Part 1:Requirements and application guide
GB/T 14536.10-2008 Automatic electrical controls for household and similar use—Particular requirements for temperature sensing controls
GB 12476.4-2010 Electrical apparatus for use in the presence of combustible dust—Part 4:Protection by intrinsic safety“iD”
GB/T 16855.1-2008 Safety of machinery—Safety-related parts of control systems—Part 1:General principles for design
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 19212.7-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V—Part 7:Particular requirements and test for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 60079-31:2008
IEC 62326-4-1:1996
ANSI/UL 248-1
ANSI/UL 746B-2009
GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 9364.3-2018 Miniature fuses—Part 3:Sub-miniature fuse-links
GB 9364.4-2006 Miniature fuses—Part 4:Universal modular fuse-links (UMF)
GB/T 9364.4-2016 Miniature fuses—Part 4:Universal modular fuse-links (UMF)—Through-hole and surface mount types
GB/T 9364.5-2011 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links
GB/T 9364.6-2001 Miniature fuses—Part 6:Fuse-holders for miniature cartridge fuse-links
GB/T 9364.6-2023 Miniature fuses—Part 6:Fuse-holders for miniature fuse-links
GB/T 9364.7-2016 Miniature fuses—Part 7:Miniature fuse-links for special applications
GB/T 9364.8-2023 Miniature fuses—Part 8:Fuse resistors with particular overcurrent protection
GB/T 9364.10-2013 Miniature fuses—Part 10:User guide for miniature fuses
GB/T 9364.11-2016 Miniature fuses—Part 11:Fuse-links for LED lamps
GB/T 9364.5-2025 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links
Adopt standards
IEC 60079-18:2009
Related Standards
GB 3836.9-1990
Replaced
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.11-1991
Replaced
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB 3836.12-1991
Replaced
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB 3836.13-1997
Replaced
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
MT 703-1997
Replaced