GB/T 18241.2-2000
Active
GB/T 20786-2025
Active
National standards
GB/T 20786-2025 Rubber track
GB/T 20786-2025 Rubber track
Basic Information
Standard Code:
GB/T 20786-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Other rubber products
ICS Name:
Other rubber and plastic products
Publish Date:
2025-10-05
Implement Date:
2026-05-01
Pages:
16 pages
Scope
This document defines the terms and definitions of rubber tracks, provides information on product classification, structure, and marking, specifies technical requirements such as dimensional specifications, appearance quality, and performance, describes the corresponding test methods, and also stipulates inspection rules, marking, packaging, transportation, storage, and usage.
This document is applicable to the manufacture and inspection of rubber tracks made by vulcanizing rubber with metal or fiber materials, which are mainly used in the drive assemblies of agricultural machinery, construction machinery, and transportation vehicles.
Development Information
Replace the following standards
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 529-1999 Rubber,vulcanized or thermoplastic—Determination of tear strength (Trouser,angle and crescent test pieces)
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 1682-1994 Rubber, vulcanized—Determination of low-temperature brittleness(single test piece method)
GB/T 1682-2014 Rubber,vulcanized—Determination of low-temperature brittleness—Single test piece method
GB/T 1689-1998 Rubber vulcanized—Determination of abrasion resistance(Akron machine)
GB/T 1689-2014 Rubber vulcanized—Determination of abrasion resistance (Akron machine)
GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 7760-2003 Rubber, vulcanized or thermoplastic—Determination of adhesion to a rigid substrate-90 degrees peel method
GB/T 8358-1987 Method of breaking tensile test for steel wire ropes
GB/T 8358-2006 Method of breaking tensile test for steel wire ropes
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
GB/T 8358-2023 Steel wire ropes—Determination of breaking force
GB/T 16586-2014 Rubber,vulcanized—Determination of adhesion to wire cord
GB/T 31333-2014 Dipped cords—Test methods adhesion strength
GB/T 32108-2015 Test methods of tensile properties for dipped yarns and cords
GB/T 39693.4-2025 Rubber,vulcanized or thermoplastic—Determination of hardness—Part 4:Indentation hardness by durometer method(Shore hardness)
Related Standards
GB/T 18241.3-2000
Replaced
GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine
GB 18241.1-2001
Replaced
GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment
GB/T 20029-2005
Active
GB/T 20029-2005 Rubber isolation bearings for instruments and equipments
GB/T 18241.4-2006
Active
GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization
GB 18173.1-2006
Replaced