GB 9706.263-2020 Active National standards force_standard

GB 9706.263-2020 Medical electrical equipment—Part 2-63:Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment

GB 9706.263-2020 Medical electrical equipment—Part 2-63:Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment

Publish Date: 2020-11-17 Implement Date: 2023-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 9706.263-2020
Standard Type: National standards
Standard Status: Active
is_force_gb: yes
CCS Name: Medical radiation equipment
ICS Name: X-ray imaging equipment
Publish Date: 2020-11-17
Implement Date: 2023-05-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 国家药品监督管理局
Pages: 31 pages

Scope

本部分适用于口外成像牙科X射线机(以下简称ME设备)的基本安全和基本性能。范围包括含此类ME设备的ME系统。
注1: 其中包括口腔曲面体层设备,头影测量设备和201.3.203中定义的牙科容积重建设备(以下简称DVR)。
注2: DVR包括牙科CBCT(锥形束计算机体层摄影),在某些地区也有其他名称,如,DVT(数字容积体层摄影);DVR也包括断层合成成像。
注3: 其中可能包括牙科治疗(如:正畸治疗)所需的其他解剖部位(如:手部)的成像。
注4: 其中可能包括ENT(耳、鼻、喉)专业医师所感兴趣的解剖部位的成像。
本部分范围限于下述X射线设备:
--包含高压变压组件的X射线管组件和
--在X射线源、患者所需拍摄部位和X射线影像接收器之间的几何关系是预先设定,并且在预期使用中,操作者不可以任意改变。
注5: 口内成像牙科X射线机不在本部分的范围内。
注6: 焦点到影像接收器的距离和焦点到拍摄对象的距离在口外成像牙科X射线机中是预先设定的。
注7: 因上述限制,未在本部分范围内的牙科X射线机,可将IEC 60601-2-54的适用条款与本部分一同使用。
属于GB 9706.18,IEC 60601-2-54,GB 9706.24,IEC 60601-2-65或GB 9706.23范围内的ME设备和ME系统,不在本专用标准的范围内。本部分的适用范围也不包括放射治疗模拟设备和用于骨或组织吸收密度的设备,也不包括牙科透视设备。
在指定范围内,本专用标准的条款,将取代和替换GB 9706.3-2000《医用电气设备第2部分:诊断X射线发生装置的高压发生器安全专用要求》和GB 9706.14-1997《医用电气设备第2部分:X射线设备附属设备安全专用要求》。
注8:
X射线发生装置和附属设备的要求,即前面说明的GB 9706.3和GB 9706.14,已被包括在GB 9706.1-2020或专用标准中。

Development Information

Word Count: 60 Thousand words Pages: 31 pages

Same series standard

GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance GB 9706.103-2020 Medical electrical equipment—Part 1-3:General requirements for basic safety and essential performance—Collateral Standard:Radiation protection in diagnostic X-ray equipment GB 9706.201-2020 Medical electrical equipment—Part 2-1:Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV GB 9706.203-2020 Medical electrical equipment—Part 2-3:Particular requirements for the basic safety and essential performance of short-wave therapy equipment GB 9706.205-2020 Medical electrical equipment—Part 2-5:Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment GB 9706.206-2020 Medical electrical equipment—Part 2-6:Particular requirements for the basic safety and essential performance of microwave therapy equipment GB 9706.211-2020 Medical electrical equipment—Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment GB 9706.212-2020 Medical electrical equipment—Part 2-12:Particular requirements for basic safety and essential performance of critical care ventilators GB 9706.217-2020 Medical electrical equipment—Part 2-17:Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment GB 9706.228-2020 Medical electrical equipment—Part 2-28:Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis GB 9706.237-2020 Medical electrical equipment—Part 2-37:Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment GB 9706.244-2020 Medical electrical equipment—Part 2-44:Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography GB 9706.245-2020 Medical electrical equipment—Part 2-45:Particular requirements for the basic safety and essential performance of mammographie X-ray equipment and mammographie stereotactic devices GB 9706.254-2020 Medical electrical equipment—Part 2-54:Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy GB 9706.260-2020 Medical electrical equipment—Part 2-60:Particular requirements for the basic safety and essential performance of dental equipment

Referenced Standards

GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs GB 27701-2011 Mechanical safety of cathode ray tubes GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems YY/T 0316-2016 Medical devices—Application of risk management to medical devices YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 0664-2008 Medical device software—Software life cycle processes YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems ISO 2882 ISO 3864-1:2002 ISO 7000:2004 ISO 7010:2011 ISO 9614-1 ISO 80000-1:2009 IEC 60601-1-6 IEC 60730-1:2010 IEC 60851-3:2009 IEC 60851-5:2008 GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance YY/T 0063-2007 Medical electrical equipment—X-ray tube assemblies for medical diagnosis—Characteristics of focal spots YY/T 0063-2024 Medical electrical equipment—X-ray tube assemblies for medical diagnosis—Focal spot dimensions and related characteristics YY/T 0063-1991 Medical diagnostic X-ray tube assembly focal point characteristics YY/T 0063-2000 Medical diagnostic X-ray tube assembly focal point characteristics IEC 60601-2-29:2008 IEC 60601-2-54:2009 IEC/TR 60788:2004 IEC 61910-1:2014

Adopt standards

IEC 60601-2-63:2017

Related Standards

Contact Us