GB 12259-1990
Abolished
GB 9706.211-2020
Active
National standards
force_standard
GB 9706.211-2020 Medical electrical equipment—Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment
GB 9706.211-2020 Medical electrical equipment—Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment
Price:
$ 80
Basic Information
Standard Code:
GB 9706.211-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
yes
CCS Name:
Medical radiation equipment
ICS Name:
Treatment equipment
Publish Date:
2020-12-24
Implement Date:
2023-05-01
Pages:
40 pages
Scope
This part of GB 9706 specifies the general requirements for the basic safety and basic performance of ME devices and ME systems.
This part applies to medical electrical equipment and medical electrical systems (hereinafter referred to as ME devices and ME systems).
Development Information
Same series standard
GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance
GB 9706.103-2020 Medical electrical equipment—Part 1-3:General requirements for basic safety and essential performance—Collateral Standard:Radiation protection in diagnostic X-ray equipment
GB 9706.201-2020 Medical electrical equipment—Part 2-1:Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV
GB 9706.203-2020 Medical electrical equipment—Part 2-3:Particular requirements for the basic safety and essential performance of short-wave therapy equipment
GB 9706.205-2020 Medical electrical equipment—Part 2-5:Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
GB 9706.206-2020 Medical electrical equipment—Part 2-6:Particular requirements for the basic safety and essential performance of microwave therapy equipment
GB 9706.212-2020 Medical electrical equipment—Part 2-12:Particular requirements for basic safety and essential performance of critical care ventilators
GB 9706.217-2020 Medical electrical equipment—Part 2-17:Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment
GB 9706.228-2020 Medical electrical equipment—Part 2-28:Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
GB 9706.237-2020 Medical electrical equipment—Part 2-37:Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
GB 9706.244-2020 Medical electrical equipment—Part 2-44:Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
GB 9706.245-2020 Medical electrical equipment—Part 2-45:Particular requirements for the basic safety and essential performance of mammographie X-ray equipment and mammographie stereotactic devices
GB 9706.254-2020 Medical electrical equipment—Part 2-54:Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
GB 9706.260-2020 Medical electrical equipment—Part 2-60:Particular requirements for the basic safety and essential performance of dental equipment
GB 9706.263-2020 Medical electrical equipment—Part 2-63:Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
Replace the following standards
Referenced Standards
GB 4943.1-2011 Information technology equipment—Safety—Part 1:General requirements
GB/T 5013.1-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements
GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements
GB/T 5169.16-2002 Fire hazard testing for electric and electronic products—Part 16:50W horizontal and vertical flame test methods
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods
GB/T 5169.16-2017 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods
GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 6346.14-2015 Fixed capacitors for use in electronic equipment—Part 14:Sectional specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
GB 7247.1-2012 Safety of laser products—Part 1:Equipment classification and requirements
GB 8897.4-2002 Primary batteries—Part 4:Safety of lithium batteries
GB 8897.4-2008 Primary batteries—Part 4:Safety of lithium batteries
GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements
GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB 9706.12-1997 Medical electrical equipment—Part 1:General requirements for safety 3.collateral standard:General requirements for radiation protection in diagnostic X-ray equipment
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation
GB/T 11210-1989 Rubber, vulcanized—Antistatic and conductive products—Determination of electrical resistance
GB/T 11210-2014 Rubber,vulcanized or thermoplastic—Antistatic and conductive products—Determination of electrical resistance
GB/T 11918.1-2014 Plugs,socket-outlet and couplers for industrial purposes—Part 1:General requirements
GB/T 11918.1-2025 Plugs,fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 1:General requirements
GB/T 11918.2-2014 Plug, socket-outlets and couplers for industrial purposes—Part 2:Dimensional compatibility and interchangeability requirements for pin and contact-tube accessories
GB/T 11918.2-2025 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes—Part 2:Dimensional compatibility requirements for pin and contact-tube accessories
GB/T 14790.1-2009 Mechanical vibration—Measurement and evaluation of human exposure to hand-transmitted vibration—Part 1:General requirements
GB 15092.1-2003 Switches for appliances Part 1:General requirements
GB/T 15092.1-2010 Switches for appliances—Part 1:General requirements
GB/T 15092.1-2020 Switches for appliances—Part 1:General requirements
GB/T 16886.1-2001 Biological evaluation of medical devices—Part 1:Evaluation and testing
GB/T 16886.1-2011 Biological evaluation of medical devices—Part 1:Evaluation and testing within a risk management process
GB/T 16886.1-2022 Biological evaluation of medical devices—Part 1:Evaluation and testing within a risk management process
GB/T 16886.2-2000 Biological evaluation of medical devices—Part 2:Animal welfare requirements
GB/T 16886.2-2011 Biological evaluation of medical devices—Part 2:Animal welfare requirements
GB/T 16886.2-2026 Biological evaluation of medical devices—Part 2:Animal welfare requirements
GB/T 16886.3-1997 Biological evaluation of medical devices—Part 3:Tests for genotoxicity, carcinogenicity and reproductive toxicity
GB/T 16886.3-2008 Biological evaluation of medical devices—Part 3:Tests for genotoxicity,carcinogenicity and reproductive toxicity
GB/T 16886.3-2019 Biological evaluation of medical devices—Part 3:Tests for genotoxicity, carcinogenicity and reproductive toxicity
GB/T 16886.4-2003 Biological evaluation of medical devices—Part 4:Selection of tests for interactions with blood
GB/T 16886.4-2022 Biological evaluation of medical devices—Part 4: Selection of tests for interactions with blood
GB/T 16886.5-2003 Biological evaluation of medical devices—Part 5:Test for in vitro cytotoxicity
GB/T 16886.5-2017 Biological evaluation of medical devices—Part 5:Tests for in vitro cytotoxicity
GB/T 16886.6-1997 Biological evaluation of medical devices—Part 6:Tests for local effects after implantation
GB/T 16886.6-2015 Biological evaluation of medical devices—Part 6:Tests for local effects after implantation
GB/T 16886.6-2022 Biological evaluation of medical devices—Part 6:Tests for local effects after implantation
GB/T 16886.7-2001 Biological evaluation of medical devices—Part 7:Ethylene oxide sterilization residuals
GB/T 16886.7-2015 Biological evaluation of medical devices—Part 7:Ethylene oxide sterilization residuals
GB/T 16886.9-2001 Biological evaluation of medical devices—Part 9:Framework for identification and quantification of potential degradation products
GB/T 16886.9-2017 Biological evaluation of medical devices—Part 9:Framework for identification and quantification of potential degradation products
GB/T 16886.9-2022 Biological evaluation of medical devices—Part 9:Framework for identification and quantification of potential degradation products
GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization
GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity
GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization
GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization
GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics
GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances
GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents
GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials
GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process
GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices
GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials
GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices
GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use
GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 27701-2011 Mechanical safety of cathode ray tubes
GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application
GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems
YY/T 0316-2016 Medical devices—Application of risk management to medical devices
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements
YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY/T 0664-2008 Medical device software—Software life cycle processes
YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
ISO 2882
ISO 3864-1:2002
ISO 7000:2004
ISO 7010:2011
ISO 9614-1
ISO 80000-1:2009
IEC 60601-1-6
IEC 60730-1:2010
IEC 60851-3:2009
IEC 60851-5:2008
IEC 60601-1-3:2008
IEC TR 60788:2004
IEC 61217
Adopt standards
IEC 60601-2-11:2013
Related Standards
GB 12261-1990
Abolished
GB 12261-1990 Artificial heart-lung machine—Bubble oxygenator
GB 12262-1990
Abolished
GB 12262-1990 Artificial heart-lung machine—Heat exchanger
GB 2024-1994
Replaced
GB 2024-1994 Acupuncture needles
GB 10035-1994
Replaced
GB 10035-1994 The air-bag type sequential external counter-pulsation device
GB 16174.1-1996
Replaced