GB/T 14598.301-2010
Replaced
GB/T 30843.2-2024
Active
National standards
GB/T 30843.2-2024 Variable-frequency drive above 1 kV and not exceeding 35 kV—Part 2:Test methods
GB/T 30843.2-2024 Variable-frequency drive above 1 kV and not exceeding 35 kV—Part 2:Test methods
Basic Information
Standard Code:
GB/T 30843.2-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power semiconductor devices and components
ICS Name:
Other equipment related to the transmission and distribution networks
Publish Date:
2024-12-31
Implement Date:
2025-07-01
Pages:
32 pages
Scope
This document describes the test methods for general-purpose variable-frequency speed control equipment (hereinafter referred to as "speed control equipment") with a voltage range of more than 1 kV but not exceeding 35 kV.
This document is applicable to the inspection and acceptance of speed control equipment with a rated input voltage between 1 kV and 35 kV AC, a rated input frequency of 50 Hz or 60 Hz, an output voltage not exceeding 35 kV, and an output frequency not exceeding 120 Hz.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.56-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fh:Vibration, broad-band random(digital control)and guidance
GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance
GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration,broadband random and guidance
GB/T 3768-1996 Acoustics—Determination of sound power levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
GB/T 3768-2017 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4798.3-2023 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 3:Stationary use at weatherprotected locations
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
GB/T 17627-2019 High-voltage test techniques for low-voltage equipment—Definitions,test and procedure requirements,test equipment
GB/T 30843.1-2024 Variable-frequency drive above 1 kV and not exceeding 35 kV—Part 1:Technical conditions
IEC 61800-3:2022
IEC 61800-5-1:2022
Related Standards
GB/T 25093-2010
Active
GB/T 25093-2010 AC filters for HVDC systems
GB/T 25099-2010
Active
GB/T 25099-2010 Step-down power saving device on distribution networks
GB/T 25738-2010
Replaced
GB/T 25738-2010 Technical guideline of motor commissioning for nuclear power plant
GB/T 2694-2010
Replaced
GB/T 2694-2010 Specification of manufacturing for transmission line tower
GB/T 26217-2010
Replaced