GB/T 33096-2016 Replaced National standards

GB/T 33096-2016 General technical specification for wind power rubber to metal parts

GB/T 33096-2016 General technical specification for wind power rubber to metal parts

Publish Date: 2016-10-13 Implement Date: 2017-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 33096-2016

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Other rubber products

ICS Name: Other rubber and plastic products

Publish Date: 2016-10-13

Implement Date: 2017-05-01

Pages: 24 pages

Scope

This standard specifies the symbols, classification, and coordinate system definitions of rubber elastic elements (hereinafter referred to as "rubber elastic elements") for wind turbines, as well as their requirements, test methods, inspection rules, marking, packaging, storage, and transportation. This standard applies to rubber elastic elements used for buffering and vibration reduction in gearboxes, generators, nacelles, control cabinets, and other components of horizontal-axis wind turbines with a power output of 200 kW or more. Rubber elastic elements used in horizontal-axis wind turbines with a power output of less than 200 kW and vertical-axis wind turbines may be implemented in accordance with this standard. This standard does not apply to polyurethane and sealing rubber products.

Development Information

Word Count: 36 Thousand words Pages: 24 pages

Superseded by the following standards

GB/T 33096-2025 General specification of elastic rubber parts for wind turbines

Referenced Standards

GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications GB/T 1682-2014 Rubber,vulcanized—Determination of low-temperature brittleness—Single test piece method GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB/T 3672.1-2002 Rubber—Tolerances of products—Part 1:Dimensional tolerances GB/T 3672.2-2002 Rubber—Tolerances of products—Part 2:Geometrical tolerances GB/T 30790.6-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 6: Laboratory performance test methods GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 529-1999 Rubber,vulcanized or thermoplastic—Determination of tear strength (Trouser,angle and crescent test pieces) GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces) GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness) GB/T 1681-1991 Rubber—Determination of rebound resilience of vulcanizates GB/T 1681-2009 Rubber—Determination of rebound resilience of vulcanizates GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing GB/T 9867-1988 Rubber—Determination of abrasion resistance using a rotating cylinderical drum device GB/T 9867-2008 Rubber,vulcanized or thermoplastic—Determination of abrasion resistance using a rotating cylindrical drum device GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests GB/T 11211-1989 Rubber, vulcanized—Determination of adhesion to metal—Tension method GB/T 11211-2009 Rubber,vulcanized or thermoplastic—Determination of adhesion to metal—Two-plate method GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods

Related Standards

GB/T 18241.2-2000 Active

GB/T 18241.2-2000 Rubber lining—Part 2— Lining for grinding mills

Publish Date: 2000-10-27

GB/T 18241.3-2000 Replaced

GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine

Publish Date: 2000-10-27

GB 18241.1-2001 Replaced

GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment

Publish Date: 2001-07-03

GB/T 20029-2005 Active

GB/T 20029-2005 Rubber isolation bearings for instruments and equipments

Publish Date: 2005-09-15

GB/T 18241.4-2006 Active

GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization

Publish Date: 2006-03-14

GB 18173.1-2006 Replaced

GB 18173.1-2006 Polymer water-proof materials—Part 1:Water-proof sheet

Publish Date: 2006-08-24