GB 6450-1986
Replaced
GB/T 1094.16-2013
Replaced
National standards
GB/T 1094.16-2013 Power transformers—Part 16:Transformers for wind turbine applications
GB/T 1094.16-2013 Power transformers—Part 16:Transformers for wind turbine applications
Basic Information
Standard Code:
GB/T 1094.16-2013
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2013-12-17
Implement Date:
2014-02-14
Pages:
36 pages
Scope
This part of GB 1094 applies to dry-type and liquid-immersed transformers used in wind power generation with a rated capacity of 100 kVA to 10,000 kVA. The maximum voltage of the equipment shall not exceed 40.5 kV, and the working voltage of at least one winding shall be greater than 1.1 kV.
Development Information
Same series standard
Superseded by the following standards
Referenced Standards
ISO 12944(所有部分)
IEC 61100
GB 1094.1-1996 Power transformers—Part 1:General
GB/T 1094.1-2013 Power transformers—Part 1:General
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB/T 1094.11-2007 Power transformers—Part 11:Dry-type transformers
GB/T 1094.11-2022 Power transformers—Part 11:Dry-type transformers
GB/T 1094.12-2013 Power transformers—Part 12:Loading guide for dry-type power transformers
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 7354-2003 Partial discharge measurements
GB/T 7354-2018 High-voltage test techniques—Partial discharge measurements
GB/T 13499-2002 Power transformers—Application guide
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 18451.1-2012 Wind turbine generator systems—Design requirements
GB/T 18451.1-2022 Wind energy generation systems—Design requirements
GB/T 18494.1-2001 Convertor transformers—Part 1:Transformers for industrial applications
GB/T 18494.1-2014 Converter transformers—Part 1:Transformers for industrial applications
GB/T 18494.3-2012 Converter transformers—Part 3:Application guide
GB/T 18494.3-2023 Converter transformers—Part 3:Application guide
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
Adopt standards
IEC 60076-16:2011
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced