GB 6450-1986
Replaced
GB/T 1094.16-2025
Active
National standards
GB/T 1094.16-2025 Power transformers—Part 16:Transformers for wind turbine applications
GB/T 1094.16-2025 Power transformers—Part 16:Transformers for wind turbine applications
Basic Information
Standard Code:
GB/T 1094.16-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2025-08-01
Implement Date:
2026-02-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国变压器标准化技术委员会(SAC/TC 44)
Pages:
24 pages
Scope
本文件规定了风力发电用变压器的额定值、使用条件、电气性能、铭牌和试验等。
本文件适用于符合GB/T 1094 .1和GB/T 1094.11要求的风力发电升压用干式和液浸式变压器，其设备最高电压不高于72.5 kV。本文件也适用于将单个风力发电机连接到风电场电力汇集系统或相邻配电网的变压器，不适用于将多个风力发电机连接到配电或输电网的变压器。
Development Information
Drafting Units:
沈阳变压器研究院有限公司、顺特电气设备有限公司、江苏华鹏变压器有限公司、广西南宝特电气制造有限公司、浙江江山变压器股份有限公司、明珠电气股份有限公司、正泰高压电气设备(武汉)有限公司、宁波奥克斯智能科技股份有限公司、江苏华辰变压器股份有限公司、海南金盘智能科技股份有限公司、特变电工衡阳变压器有限公司、上海置信电气有限公司、西安高压电器研究院股份有限公司、湖南华夏特变股份有限公司、常州西电变压器有限责任公司、扬州华鼎电器有限公司、成来电气科技有限公司、天津华能变压器有限公司、成都西电中特电气有限责任公司、特变电工京津冀智能科技有限公司、衡水碧海电力器材有限公司、西电济南变压器股份有限公司、红光电气集团有限公司、特变电工沈阳变压器集团有限公司、弘乐集团有限公司、山东电力设备有限公司、中国电力科学研究院有限公司、国网吉林省电力有限公司电力科学研究院、远景能源有限公司、南方电网科学研究院有限责任公司、北京金风科创风电设备有限公司
Drafting Persons:
杜炜、李霞、王欣、陈琪、黎斌、姜振军、蔡定国、仲照龙、安涛、蒋硕文、王忠波、王立彬、施闻博、李宣健楠、张喜明、吴国良、高雄鹰、郑国培、刘培欣、何毅、张谊诚、王松、吴则禹、陈伟卫、许平、冯俊峰、林波、应斯、赵春明、王江辉、卓然、韩志强
Replace the following standards
Referenced Standards
GB 1094.1-1996 Power transformers—Part 1:General
GB/T 1094.1-2013 Power transformers—Part 1:General
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
GB/T 1094.11-2007 Power transformers—Part 11:Dry-type transformers
GB/T 1094.11-2022 Power transformers—Part 11:Dry-type transformers
GB/T 1094.12-2013 Power transformers—Part 12:Loading guide for dry-type power transformers
GB/Z 1094.14-2011 Power transformers—Part 14:Design and application of liquid-immersed transformers using high-temperature insulation material
GB/T 1094.14-2022 Power transformer—Part 14:Liquid-immersed power transformer using high-temperature insulation materials
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 2900.95-2015 Electrotechnical terminology—transformers,voltage regulators and reactors
GB/T 4798.4-1990 Environmental conditions existing in the application for electric and electronic products—Stationary use at non-weather-protected locations
GB/T 4798.4-2007 Environmental conditions existing in the application of electric and electronic products—Part 4:Stationary use at non-weather-protected locations
GB/T 4798.4-2023 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 4:Stationary use at non-weatherprotected locations
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/T 6451-2008 Specification and technical requirements for oil-immersed power transformers
GB/T 6451-2015 Specification and technical requirements for oil-immersd power transformers
GB/T 6451-2023 Technical parameters and requirements for oil-immersed power transformers
GB/T 18494.1-2001 Convertor transformers—Part 1:Transformers for industrial applications
GB/T 18494.1-2014 Converter transformers—Part 1:Transformers for industrial applications
GB/T 30790.1-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 1:General introduction
GB/T 30790.2-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 2:Classification of environments
GB/T 30790.3-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 3: Design considerations
GB/T 30790.4-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 4: Types of surface and surface preparation
GB/T 30790.5-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 5: Protective paint systems
GB/T 30790.6-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 6: Laboratory performance test methods
GB/T 30790.7-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 7:Execution and supervision of paint work
GB/T 30790.8-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 8: Development of specification for new work and maintenance
GB/T 30790.2-2014 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 2:Classification of environments
Adopt standards
IEC/IEEE 60076-16:2018
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced