GB/T 20965-2025 Control network HBES technical specification—Home and building control system

GB/T 20965-2013 Control network HBES technical specification—Home and building control system

GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature GB/T 4798.3-1990 Environmental conditions existing in the application for electric and electronic products—Stationary use at weather-protected locations GB/T 4798.3-2007 Environmental conditions existing in the application of electric and electronic products—Part 3:Stationary use at weather-protected locations GB/T 4798.3-2023 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 3:Stationary use at weatherprotected locations GB 5023.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 1:General requirements GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 2:Test methods GB/T 5023.2-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 2:Test methods GB/T 7289-2017 Electric components—Reliability—Reference conditions for failure rates and stress models for conversion GB/T 9387.1-1998 Information technology—Open systems interconnection—Basic reference Model—Part 1:The Basic Model GB 16895.3-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 54:Earthing arrangements and protective conductors GB/T 16895.3-2004 Electrical installations of buildings—Part 5-54:Selection and erection of electrical equipment-Earthing arrangements, protective conductors and protective bonding conductors GB/T 16895.3-2017 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors GB/T 16895.3-2024 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems GB/T 16895.6-2014 Low-voltage electrical installations—Part 5-52:Selection and erection of electrical equipment—Wiring systems GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests GB/T 17045-2020 Protection against electric shock—Common aspects for installations and equipment GB 17625.2-1999 Electromagnetic compatibility Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A GB/T 17625.2-2007 Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17737.1-2000 Radio-frequency cables—Part 1:Generic specification—General, definitions, requirements and test methods GB/T 17737.1-2013 Coaxial communication cables—Part 1:Generic specification—General,definitions and requirements GB/T 17799.1-1999 Electromagnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments GB/T 17799.1-2017 Electromagnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments GB/T 17799.2-2003 Electromagnetic compatibility—Generic standards—Immunity for industrial environments GB/T 17799.2-2023 Electromagnetic compatibility—Generic standards—Part 2: Immunity standard for industrial environments GB 19212.1-2003 Safety of power transformers, power supply units and similar—Part 1:General requirements and tests GB 19212.1-2008 Safety of power transformers,power supplies,reactors and similar products—Part 1:General requirements and tests GB/T 19212.1-2016 Safety of transformers, reactors,power supply units and combinations thereof—Part 1:General requirements and tests GB/T 19212.1-2023 Safety of transformers,reactors,power supply units and combinations thereof—Part 1:General requirements and tests GB 19212.7-2006 Safety of power transformers, power supply units and similar—Part 7:Particular requirements for safety isolating transformers for general use GB/T 19212.7-2012 Safety of transformers,reactors,power supply units and similar products for supply voltages up to 1 100 V—Part 7:Particular requirements and test for safety isolating transformers and power supply units incorporating safety isolating transformers GB/T 19334-2003 Dimension of low-voltage switchgear and control gear—Standardized mounting on rails for mechanical support of electrical devices in switchgear and control gear installations GB/T 19334-2021 Dimensions of low-voltage switchgear and controlgear—Standardized mounting on rails for mechanical support of switchgear,controlgear and accessories GB/T 20438.1-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 1:General requirements GB/T 20438.1-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 1:General requirements GB/T 20438.2-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 2:Requirements for electrical/electronic/programmable electronic safety-related systems GB/T 20438.2-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 2:Requirements for electrical/electronic/programmable electronic safety-related systems GB/T 20438.3-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 3:Software requirements GB/T 20438.3-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 3:Software requirements GB/T 20438.4-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 4:Definitions and abbreviations GB/T 20438.4-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 4:Definitions and abbreviations GB/T 20438.5-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 5:Examples of methods for the determination of safety integrity levels GB/T 20438.5-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 5:Examples of methods for the determination of safety integrity levels GB/T 20438.6-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 6:Guidelines on the application of GB/T 20438.2 and GB/T 20438.3 GB/T 20438.6-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 6:Guidelines on the application of GB/T 20438.2 and GB/T 20438.3 GB/T 20438.7-2006 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 7:Overview of techniques and measures GB/T 20438.7-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 7:Overview of techniques and measures EN 50065-1 EN 50174-1:2018 EN 55016-1-2 IEC 60189-2 IEC 61000-3-2 IEC 61000-6-3 IEC 61643-11