GB 14821.1-1993
Abolished
GB/T 33588.4-2017
Replaced
National standards
GB/T 33588.4-2017 Lightning protection system components(LPSC)—Part 4:Requirements for conductor fasteners
GB/T 33588.4-2017 Lightning protection system components(LPSC)—Part 4:Requirements for conductor fasteners
Basic Information
Standard Code:
GB/T 33588.4-2017
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Surge protector
ICS Name:
\nLightning protection
Publish Date:
2017-05-12
Implement Date:
2017-12-01
Pages:
19 pages
Scope
This part of GB/T 33588 specifies the requirements and tests for conductor fasteners made of metal, non-metal, and composite materials. Conductor fasteners are used to fasten lightning arresters, down conductors, and grounding systems. Due to the large number and wide variety of types used in modern buildings, this part does not cover conductor fasteners applied to non-metallic bricks, tiles, and plastic panels (membranes) on building roofs. LPSC can also be used in hazardous environments. Attention should be paid to the additional requirements for components installed in such environments.
Development Information
Same series standard
GB/T 33588.1-2017 Lightning protection system components(LPSC)—Part 1:Requirements for connection components
GB/T 33588.2-2017 Lightning protection system components(LPSC)—Part 2:Requirements for conductors and earth electrodes
GB/T 33588.3-2017 Lightning protection system components(LPSC)—Part 3:Requirements for isolating spark gaps(ISG)
GB/T 33588.5-2017 Lightning protection system components(LPSC)—Part 5:Requirements for earth electrode inspection housings and earth electrode seals
GB/T 33588.7-2017 Lightning protection system components(LPSC)—Part 7:Requirements for low resistivity mixture for earthing
Superseded by the following standards
Referenced Standards
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 9789-2008 Metallic and other non-organic coatings—Sulfur dioxide test with general condensation of moisture
GB/T 16422.2-2014 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon-arc sources
GB/T 16422.3-2014 Plastics—Methods of exposure to laboratory light sources—Part 3:Fluorescent UV lamps
GB/T 16422.4-2014 Plastics—Methods of exposure to laboratory light sources—Part 4:Open-flame carbon-arc lamps
GB/T 21714.3-2015 Protection against lightning—Part 3:Physical damage to structures and life hazard
ISO 6957:1988
IEC 62305(所有部分)
Adopt standards
IEC 62561-4:2010
Related Standards
GB/T 19271.2-2005
Abolished
GB/T 19271.2-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 2:Shielding of structures, bonding inside structures and earthing
GB/T 19271.3-2005
Abolished
GB/T 19271.3-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 3:Requirements of surge protective devices(SPDs)
GB/T 19271.4-2005
Abolished
GB/T 19271.4-2005 Protection against lightning electromagnetic impulse(LEMP)—Part 4:Protection of equipment in existing structures
GB/T 7327-2008
Abolished
GB/T 7327-2008 Silicon carbide surge arresters for a.c.systems
GB/T 33588.6-2016
Replaced