GB/T 42554-2023 General requirements for environmental testing of measuring instruments

GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.7-1995 Environmental testing for electric and electronic products Part 2:Test Ec and quidance:Drop and topple (Primarily for equipment-type specimens) GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist GB/T 2423.38-1990 Basic environmental test procedures for electric and electronic products Test R:Water test method GB/T 2423.38-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance GB/T 2423.38-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test R:Water test method and guidance GB/T 2423.38-2021 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance GB/T 2423.43-1995 Environmental testing for electric and electronic products Part 2:test methods—Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) and guidance GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests GB/T 2423.56-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fh:Vibration, broad-band random(digital control)and guidance GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance GB/T 2423.56-2023 Environmental testing—Part 2:Test methods—Test Fh:Vibration,broadband random and guidance GB/T 17214.2-2005 Operating conditions for industrial-process measurement and control equipment—Part 2:Power GB/T 17626.1-1998 Electromagnetic compatibility—Testing and measurement techniques—Overview of immunity tests GB/T 17626.1-2006 Electromagnetic compatibility—Testing and measurement techniques—Overview of immunity tests GB/Z 17626.1-2024 Electromagnetic compatibility—Testing and measurement techniques—Part 1:Overview of immunity tests GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.8-1998 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17626.13-2006 Electromagnetic compatibility—Testing and measurement techniques—Harmonics and interharmonics including mains signalling at a.c. power port,low frequency immunity test GB/T 17626.17-2005 Electromagnetic Compatibility—Testing and measurement techniques—Ripple on d.c.input power port immunity test GB/T 17626.20-2014 Electromagnetic compatibility—Testing and measurement techniques—Emission and immunity testing in transverse electromagnetic(TEM) waveguide GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests GB/T 17799.1-1999 Electromagnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments GB/T 17799.1-2017 Electromagnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments GB/T 17799.2-2003 Electromagnetic compatibility—Generic standards—Immunity for industrial environments GB/T 17799.2-2023 Electromagnetic compatibility—Generic standards—Part 2: Immunity standard for industrial environments GB/Z 18039.1-2000 Electromagnetic compatibility—Environment—Classification of electromagnetic environments GB/Z 18039.1-2019 Electromagnetic compatibility—Environment—Description and classification of electromagnetic environments GB/T 18039.3-2003 Electromagnetic compatibility—Environment—Eompatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems GB/T 18039.3-2017 Electromagnetic compatibility—Environment—Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems GB/Z 18039.5-2003 Electromagnetic compatibility—Environment—Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems GB/T 21437.2-2008 Road vehicles—Electrical disturbances from conduction and coupling—Part 2:Electrical transient conduction along supply lines only GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2:Electrical transient conduction along supply lines only GB/T 21437.3-2012 Road vehicles—Electrical disturbances from conduction and coupling—Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines GB/T 21437.3-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines GB/T 28046.2-2011 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2:Electrical loads GB/T 28046.2-2019 Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2:Electrical loads JJF 1001-2011 General Terms in Metrology and Their Definitions IEC 60512-11-8:1995 IEC 61000-4-19:2014 OIML V1:2013