YY 9706.250-2021
Active
Industry standards-Medicine
YY 9706.250-2021 Medical electrical equipment—Part 2-50:Particular requirements for the basic safety and essential performance of infant phototherapy equipment
YY 9706.250-2021 Medical electrical equipment—Part 2-50:Particular requirements for the basic safety and essential performance of infant phototherapy equipment
Basic Information
Standard Code:
YY 9706.250-2021
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Medical optical instruments and equipment, and endoscopes
ICS Name:
Treatment equipment
Publish Date:
2021-03-09
Implement Date:
2023-05-01
Publisher:
国家药品监督管理局
Technical Committee:
全国光学和光子学标准化技术委员会医用光学和仪器分技术委员会(SAC/TC 103/SC 1)
Pages:
23 pages
Scope
GB 9706的本部分规定了ME设备和ME系统的基本安全和基本性能的通用要求。
本部分适用于医用电气设备和医用电气系统(以下简称ME设备和ME系统)。
如果一章或一条明确指出仅适用于ME设备或ME系统,标题和 章或条的正文会说明。如果不是这种情况,与此相关的章或条同时适用于ME设备和ME系统。
除7.2.13和8.4.1外,本部分范围内的ME设备或ME系统的预期生理效应所导致的危险(源)在本部分中没有具体要求。
替换:
本部分规定了婴儿光治疗设备的安全要求。然而,若制造商已在其风险管理文档中表明,与通过设备治疗带来的好处相比,相关危害风险能维持在可接受范围内,则符合特定条款且具有同等安全性的替代方法将不被视为违反相关规定。
本部分适用于婴儿光治疗设备的基本安全和基本性能,也称为ME设备。
若某个条款或子条款特定地只适用于ME设备或ME系统,则该条款或子条款的标题和内容将明确说明这一点。若没有明确说明,则该条款或子条款适用于相关的ME设备和ME系统。
除通用标准中7.2.13和8.4.1外,本部分的专用要求不包括本部分范围内的ME设备或ME系统的预期生理机能的固有危害。
注: 见通用标准中4.2。
本部分不适用于:
——在医疗使用中通过毯子、衬垫或床垫提供热量的装置,信息见YY 9706.235;
——婴儿培养箱,信息见YY 0455;
——婴儿转运培养箱,信息见YY 9706.220;
——婴儿辐射保暖台,信息见GB 11243。
Development Information
Drafting Units:
浙江省医疗器械检验研究院、宁波戴维医疗器械股份有限公司
Drafting Persons:
叶岳顺、杜堃、郭永兵、方春子、林定余、吴夷
Same series standard
YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY/T 9706.106-2021 Medical electrical equipment—Part 1-6:General requirements for basic safety and essential performance—Collateral Standard:Usability
YY 9706.108-2021 Medical electrical equipment—Part 1-8:General requirements for basic safety and essential performance-Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
YY/T 9706.110-2021 Medical electrical equipment—Part 1-10:General requirements for basic safety and essential performance—Collateral Standard: Requirements for the development of physiologic closed-loop controllers
YY 9706.111-2021 Medical electrical equipment—Part 1-11:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
YY 9706.112-2021 Medical electrical equipment—Part 1-12:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
YY 9706.210-2021 Medical electrical equipment—Part 2-10:Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
YY 9706.220-2021 Medical electrical equipment—Part 2-20:Particular requirements for the basic safety and essential performance of infant transport incubators
YY 9706.221-2021 Medical electrical equipment—Part 2-21:Particular requirements for the basic safety and essential performance of infant radiant warmers
YY 9706.233-2021 Medical electrical equipment—Part 2-33:Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
YY 9706.234-2021 Medical electrical equipment—Part 2-34:Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
YY 9706.235-2021 Medical electrical equipment—Part 2-35:Particular requirements for the basic safety and essential performance of heating devices using blankets,pads or mattresses and intended for heating in medical use
YY 9706.240-2021 Medical electrical equipment—Part 2-40:Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment
YY 9706.247-2021 Medical electrical equipment—Part 2-47:Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
YY 9706.252-2021 Medical electrical equipment—Part 2-52:Particular requirements for the basic safety and essential performance of medical beds
YY 9706.257-2021 Medical electrical equipment—Part 2-57:Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic,diagnostic,monitoring and cosmetic/aesthetic use
YY 9706.262-2021 Medical electrical equipment—Part 2-62:Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound(HITU) equipment
YY 9706.269-2021 Medical electrical equipment—Part 2-69:Particular requirements for basic safety and essential performance of oxygen concentrator equipment
YY 9706.270-2021 Medical electrical equipment—Part 2-70:Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
YY 9706.272-2021 Medical electrical equipment—Part 2-72:Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
Replace the following standards
Referenced Standards
GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization
GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity
GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization
GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization
GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity
GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials
GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices
GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics
GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys
GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables
GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances
GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents
GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials
GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process
GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials
GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices
GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials
GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices
GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices
GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use
GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 27701-2011 Mechanical safety of cathode ray tubes
GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application
GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems
YY/T 0316-2016 Medical devices—Application of risk management to medical devices
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements
YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests
YY/T 0664-2008 Medical device software—Software life cycle processes
YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
ISO 2882
ISO 3864-1:2002
ISO 7000:2004
ISO 7010:2011
ISO 9614-1
ISO 80000-1:2009
IEC 60601-1-6
IEC 60730-1:2010
IEC 60851-3:2009
IEC 60851-5:2008
GB 9706.1-1995 Medical electrical equipment—Part 1:General requirements for safety
GB 9706.1-2007 Medical electrical equipment—Part 1:General requirements for safety
GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance
YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests
Adopt standards
IEC 60601-2-50:2009+A1:2016
Related Standards
GB 12259-1990
Abolished
GB 12261-1990
Abolished
GB 12261-1990 Artificial heart-lung machine—Bubble oxygenator
GB 12262-1990
Abolished
GB 12262-1990 Artificial heart-lung machine—Heat exchanger
GB 2024-1994
Replaced
GB 2024-1994 Acupuncture needles
GB 10035-1994
Replaced
GB 10035-1994 The air-bag type sequential external counter-pulsation device
GB 16174.1-1996
Replaced