YY 9706.272-2021 Medical electrical equipment—Part 2-72:Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients

YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 9706.106-2021 Medical electrical equipment—Part 1-6:General requirements for basic safety and essential performance—Collateral Standard:Usability YY 9706.108-2021 Medical electrical equipment—Part 1-8:General requirements for basic safety and essential performance-Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems YY/T 9706.110-2021 Medical electrical equipment—Part 1-10:General requirements for basic safety and essential performance—Collateral Standard: Requirements for the development of physiologic closed-loop controllers YY 9706.111-2021 Medical electrical equipment—Part 1-11:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment YY 9706.112-2021 Medical electrical equipment—Part 1-12:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment YY 9706.210-2021 Medical electrical equipment—Part 2-10:Particular requirements for the basic safety and essential performance of nerve and muscle stimulators YY 9706.220-2021 Medical electrical equipment—Part 2-20:Particular requirements for the basic safety and essential performance of infant transport incubators YY 9706.221-2021 Medical electrical equipment—Part 2-21:Particular requirements for the basic safety and essential performance of infant radiant warmers YY 9706.233-2021 Medical electrical equipment—Part 2-33:Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis YY 9706.234-2021 Medical electrical equipment—Part 2-34:Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment YY 9706.235-2021 Medical electrical equipment—Part 2-35:Particular requirements for the basic safety and essential performance of heating devices using blankets,pads or mattresses and intended for heating in medical use YY 9706.240-2021 Medical electrical equipment—Part 2-40:Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment YY 9706.247-2021 Medical electrical equipment—Part 2-47:Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems YY 9706.250-2021 Medical electrical equipment—Part 2-50:Particular requirements for the basic safety and essential performance of infant phototherapy equipment YY 9706.252-2021 Medical electrical equipment—Part 2-52:Particular requirements for the basic safety and essential performance of medical beds YY 9706.257-2021 Medical electrical equipment—Part 2-57:Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic,diagnostic,monitoring and cosmetic/aesthetic use YY 9706.262-2021 Medical electrical equipment—Part 2-62:Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound(HITU) equipment YY 9706.269-2021 Medical electrical equipment—Part 2-69:Particular requirements for basic safety and essential performance of oxygen concentrator equipment YY 9706.270-2021 Medical electrical equipment—Part 2-70:Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment

YY 0600.2-2007 Lung ventilators for medical use—Particular requirements for basic safety and essential performance—Part 2:Home care ventilators for ventilator-dependent patients

GB/T 16886.10-2000 Biological evaluation of medical devices—Part 10:Tests for irritation and sensitization GB/T 16886.10-2005 Biological evaluation of medical devices—Part 10:Tests for irritation and delayed-type hypersensitivity GB/T 16886.10-2017 Biological evaluation of medical devices—Part 10:Tests for irritation and skin sensitization GB/T 16886.10-2024 Biological evaluation of medical devices—Part 10:Tests for skin sensitization GB/T 16886.11-1997 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2011 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.11-2021 Biological evaluation of medical devices—Part 11:Tests for systemic toxicity GB/T 16886.12-2000 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2005 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2017 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.12-2023 Biological evaluation of medical devices—Part 12:Sample preparation and reference materials GB/T 16886.13-2001 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.13-2017 Biological evaluation of medical devices—Part 13:Identification and quantification of degradation products from polymeric medical devices GB/T 16886.14-2003 Biological evaluation of medical devices—Part 14:Identification and quantification of degradation products from ceramics GB/T 16886.15-2003 Biological eveluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.15-2022 Biological evaluation of medical devices—Part 15:Identification and quantification of degradation products from metals and alloys GB/T 16886.16-2003 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2013 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.16-2021 Biological evaluation of medical devices—Part 16:Toxicokinetic study design for degradation products and leachables GB/T 16886.17-2005 Biological evaluation of medical devices—Part 17:Establishment of allowable limits for leachable substances GB/T 16886.17-2025 Biological evaluation of medical devices—Part 17:Toxicological risk assessment of medical device constituents GB/T 16886.18-2011 Biological evaluation of medical devices—Part 18:Chemical characterization of materials GB/T 16886.18-2022 Biological evaluation of medical devices—Part 18:Chemical characterization of medical device materials within a risk management process GB/T 16886.19-2011 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19:Physico-chemical,morphological and topographical characterization of materials GB/T 16886.20-2015 Biological evaluation of medical devices—Part 20:Principles and methods for immunotoxicology testing of medical devices GB/Z 16886.22-2022 Biological evaluation of medical devices—Part 22:Guidance on nanomaterials GB/T 16886.23-2023 Biological evaluation of medical devices—Part 23:Tests for irritation GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements GB 18278.1-2015 Sterilization of health care products—Moist heat—Part 1:Requirements for the development, validation and routine control of a sterilization process for medical devices GB 18279.1-2015 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 18280.1-2015 Sterilization of health care products—Radiation—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices GB 19212.2-2006 Safety of power transformers, power supply units and similar—Part 2:Particular requirements for separating transformers for general use GB/T 19212.2-2012 Safety of power transformers, power supplies, reactors and similar products—Part 2:Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications GB/T 19212.2-2025 Safety of transformers, reactors, power supply units and combinations thereof—Part 2:Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs GB 27701-2011 Mechanical safety of cathode ray tubes GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable application GB/T 28164.2-2025 Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety requirements for portable sealed secondary cells,and for batteries made from them,for use in portable applications—Part 2:Lithium systems YY/T 0316-2016 Medical devices—Application of risk management to medical devices YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements YY 0505-2005 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY 0505-2012 Medical electrical equipment—Part 1-2:General requirements for safety—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 0664-2008 Medical device software—Software life cycle processes YY 0709-2009 Medical electrical equipment—Part 1-8:General requirements for safety—Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems ISO 2882 ISO 3864-1:2002 ISO 7000:2004 ISO 7010:2011 ISO 9614-1 ISO 80000-1:2009 IEC 60601-1-6 IEC 60730-1:2010 IEC 60851-3:2009 IEC 60851-5:2008 GB/T 1962.1-2001 Conical fittings with a6%(Luer)taper for syringes, needles and certain other medical equipment Part 1:General requirement GB/T 1962.1-2015 Conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment—Part 1:General requirement GB/T 1962.2-2001 Conical fittings with a 6%(Luer) taper for syringes, needles and certain other medical equipment—Part 2:Lock fittings GB/T 3767-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane GB/T 4999-2003 Anaesthetic and respiratory equipment—Vocabulary GB 9706.1-2020 Medical electrical equipment—Part 1:General requirements for basic safety and essential performance GB 50751-2012 Technical code for medical gases engineering YY/T 0461-2003 Breathing tubes intended for use with aneasthetic apparatus and ventilators YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements YY 0601-2007 Anaesthetic gas monitors YY 0601-2009 The basic safety and main performance specific requirements for medical electrical equipment respiratory gas monitoring devices YY/T 0735.1-2009 Anaesthetic and respiratory equipment—Heat and moisture exchangers(HMEs)for humidifying respired gases in humans—Part 1:HMEs for use with minimum tidal volumes of 250 mL YY/T 0735.2-2010 Anaesthetic and respiratory equipment—Heat and moisture exchangers(HMEs) for humidifying respired gases in humans—Part 2:HMEs for use with tracheostomized patients having minimum tidal volumes of 250 mL YY/T 0753.1-2009 Breathing system filters for anaesthetic and respiratory use—Part 1:Salt test method to assess filtration performance YY/T 0753.2-2009 Breathing system filters for anaesthetic and respiratory use—Part 2:Non-filtration aspects YY 0786-2010 Respiratory tract humidifiers for medical use—Particular requirements for respiratory humidification systems YY/T 0799-2010 Low-pressure hose assemblies for use with medical gases YY/T 0916.1-2014 Small-bore connectors for liquids and gases in healthcare applications—Part 1:General requirements YY/T 0916.1-2021 Small-bore connectors for liquids and gases in healthcare applications—Part 1:General requirements YY 1040.1-2003 Anaesthetic and respiratory equipment—Conical connectors—Part 1:Cones and sockets YY/T 1040.1-2015 Anaesthetic and respiratory equipment—Conical connectors—Part 1:Cones and sockets YY/T 1474-2016 Medical devices—Application of usability engineering to medical devices YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagnetic compatibility—Requirements and tests YY/T 9706.106-2021 Medical electrical equipment—Part 1-6:General requirements for basic safety and essential performance—Collateral Standard:Usability YY 9706.108-2021 Medical electrical equipment—Part 1-8:General requirements for basic safety and essential performance-Collateral standard:General requirements,tests and guidance for alarm systems in medical electrical equipment and medical electrical systems YY 9706.111-2021 Medical electrical equipment—Part 1-11:General requirements for basic safety and essential performance—Collateral Standard:Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment ISO 4871:1996 ISO 7396-1 ISO 14937 ISO 17664 IEC 61672-1:2002

ISO 80601-2-72:2015