GB/T 43991-2024
Active
T/TMAC 071-2023
Active
Group standards
T/TMAC 071-2023 Tunnel assembly type inverted arch design and construction technical specification
T/TMAC 071-2023 Tunnel assembly type inverted arch design and construction technical specification
Price:
$ 70.00
Basic Information
Standard Code:
T/TMAC 071-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Concrete structure engineering
ICS Name:
\nTunnel construction
Publish Date:
2023-11-01
Implement Date:
2023-12-01
Pages:
44 pages
Scope
This document specifies the technical requirements for the investigation, design, construction, and acceptance of prefabricated inverted arches in railway tunnels.
This document is applicable to new railway tunnels constructed using the TBM method and the drilling and blasting method.
Note: Prefabricated inverted arches are widely used in railway tunnels and have been proven feasible through engineering practice. Due to the limited radius of railway route selection, there are many long railway tunnels. Generally, the geological conditions of long railway tunnels are better, making it suitable to use prefabricated inverted arch structures. Highway tunnels have a much smaller radius of route selection than railway tunnels. Therefore, there are fewer long highway tunnels than long railway tunnels, and the geological conditions of short highway tunnels are generally worse than those of long tunnels. The longer the prefabricated inverted arch structure is, the smaller the impact on the overall cost of the tunnel. Long railway tunnels have more advantages in using prefabricated inverted arch structures. Therefore, this document is mainly focused on railway tunnels. However, considering that although the cross-section size of railway tunnels and highway tunnels is different under different standards, the structural forms are similar, this document also has reference significance for the use of prefabricated inverted arch structures in highway tunnels.
Development Information
Referenced Standards
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB/T 699-1999 Quality carbon structural steels
GB/T 699-2015 Quality carbon structure steels
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 1596-1991 Fly ash used for cement and concrete
GB/T 1596-2005 Fly ash used for cement and concrete
GB/T 1596-2017 Fly ash used for cement and concrete
GB/T 3077-1999 Alloy structure steels
GB/T 3077-2015 Alloy structure steels
GB 8076-1997 Concrete admixtures
GB 8076-2008 Concrete admixtures
GB/T 8076-2025 Concrete admixtures
GB/T 1499.1-2008 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB/T 1499.1-2017 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB 1499.1-2024 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB/T 1499.2-2007 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1499.2-2018 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB 1499.2-2024 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 18046-2000 Ground granulated blast furnace slag used for cement and concrete
GB/T 18046-2008 Ground granulated blast furnace slag used for cement and concrete
GB/T 18046-2017 Ground granulated blast furnace slag used for cement，mortar and concrete
GB/T 18173.3-2002 Polymer water—Proof materials—Part 3—Hydrophilic expasion rubber
GB/T 18173.3-2014 Polymer water-proof materials—Part 3:Hydrophilic expasion rubber
GB/T 21120-2007 Synthetic fibres for cement,cement mortar and concrete
GB/T 21120-2018 Synthetic fibres for cement concrete and mortar
GB 50010-2010 Code for design of concrete structures
GB 50017-2017 Code for design of steel structures
GB 50018-2002 Technical code of cold-formed thin-wall steel structures
GB 50108-2008 Technical Code for Waterproofing of Underground Works
GB 50111-2006 Code for seismic design of railway emgineering
GB 50119-2013 Code for concrete admixture application
GB/T 50146-2014 Technical code for application of fly ash concrete
GB 50204-2015 Concrete Structure Construction Quality Acceptance Standards
GB/T 50214-2013 Technical code for composite steel-form
GB/T 50476-2019 Code for durability design of concrete structures
GB 50666-2011 Code for construction of concrete structures
GB 50870-2013 Unified code for technique for constructional safety
GB/T 51231-2016 Technical standard for assembled buildings with concrete structure
JC/T 2030-2010 Prefabricated concrete lining segment production process technical specification
JGJ 1-2014 Technical specification for precast concrete structures
JGJ 33-2012 Technical specification for safety operation of constructional machinery
JGJ 55-2011 Specification for mix proportion design of ordinary concrete
JGJ 63-2006 Standard of water for concrete
JGJ 276-2012 Technical code for safety of lifting in construction
JG/T 472-2015 Steel fiber reinforced concrete
JC/T 949-2021 JC/T 949-2021 Release agent for concrete products
JC/T 949-2005 Demolition agent for concrete products
TB 10003
TB 10005
TB 10424
Related Standards
DB45/T 2832-2024
Active
DB45/T 2832-2024 Road Tunnel Maintenance and Strengthening Technical Regulations
DB41/T 2660-2024
Active
DB41/T 2660-2024 Road tunnel intelligent monitoring and measurement technical specification
DB61/T 1771-2023
Active
DB61/T 1771-2023 Guidelines for Quality Control of Waterproofing Construction in Highway Tunnels
DB61/T 1770-2023
Active
DB61/T 1770-2023 Guidelines for Quality Control of Secondary lining Construction in Highway Tunnels
DB3201/T 1155-2023
Active