GB/T 20417.2-2025 Active National standards

GB/T 20417.2-2025 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties

GB/T 20417.2-2025 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties

Publish Date: 2025-12-02 Implement Date: 2026-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 66

Out of stock

Basic Information

Standard Code: GB/T 20417.2-2025

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Basic standards and general methods for synthetic resins and plastics

ICS Name: Thermoplastic plastics

Publish Date: 2025-12-02

Implement Date: 2026-07-01

Pages: 20 pages

Scope

This document describes the methods for preparing and testing the performance of acrylonitrile-butadiene-styrene (ABS) molding and extrusion materials. It also describes the pretreatment of test materials and the adjustment of the samples' condition before testing. This document outlines the methods and conditions for preparing ABS molding and extrusion material samples, as well as the methods for measuring the material's performance using these samples. It lists the appropriate and necessary properties and test methods for characterizing ABS molding and extrusion materials. These properties are selected from GB/T 19467.1 General Test Methods. The document also lists other test methods widely used or of particular significance for ABS molding and extrusion materials, as well as the methods for measuring the named properties in Part 1. This document is applicable to the preparation and performance testing of acrylonitrile-butadiene-styrene (ABS) molding and extrusion material samples.

Development Information

Word Count: 23 Thousand words Pages: 20 pages

Same series standard

GB/T 20417.1-2025 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 1:Designation system and basis for specifications

Replace the following standards

GB/T 20417.2-2006 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties

Referenced Standards

GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method GB/T 1033.2-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 2:Density gradient column method GB/T 1033.3-2010 Plastics—Methods for determining the density of non-cellular plastics—Part 3:Gas pyknometer method GB/T 1034-1998 Plastics—Determination of water absorption GB/T 1034-2008 Plastics—Determination of water absorption GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics GB/T 1040.4-2006 Plastics—Determination of tensile properties—Part 4:Test conditions for isotropic and orthotropic fibre-reinforced plastic composites GB/T 1043.1-2008 Plastics—Determination of charpy impact properties—Part 1:Non-instrumented impact test GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test GB/T 1408.1-1999 Methods of test for electric strength of solid insulating materials-Tests at power frequencies GB/T 1408.1-2006 Electrical strength of insulating materials—Test methods—Part 1:Tests at power frequencies GB/T 1408.1-2016 Insulating materials—Test methods for electric strength—Part 1:Test at power frequencies GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST) GB/T 1633-2025 Plastics—Thermoplastic materials—Determination of Vicat softerning temperature(VST) GB/T 1634.1-2004 Plastics—Determination of temperature of deflection under load—Part 1:General test method GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method GB/T 1634.1-2025 Plastics—Determination of temperature of deflection under load—Part 1:General test method GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite GB/T 1843-1996 Plastics—Determination of izod impact strength GB/T 1843-2008 Plastics—Determination of izod impact strength GB/T 2406.2-2009 Plastics—Determination of burning behaviour by oxygen index—Part 2:Ambient-temperature test GB/T 2406.3-2022 Plastics—Determination of burning behaviour by oxygen index—Part 3:Elevated-temperature test GB/T 2408-1996 Plastics—Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test GB 2536-1990 Transformer oils GB 2536-2011 Fluids for electrotechnical applications—Unused mineral insulating oils for transformers and switchgear GB 2536-2025 Fluids for electrotechnical applications—Unused mineral insulating oils for transformers and switchgear GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 8088-1999 Rubber, raw natural and rubber latex, natural—Determination of nitrogen content GB/T 8088-2008 Rubber,raw natural and rubber latex,natural—Determination of nitrogen content GB/T 8088-2025 Raw natural rubber and natural rubber latex—Determination of nitrogen content GB/T 8661-1988 Determination of residual acrylonitrile monomer content in acrylonitrile-butadiene-styrene resin by gas chromatography GB/T 8661-2008 Plastics—Styrene/acrylonitrile copolymers—Determination of residual acrylonitrile monomer content—Gas chromatography method GB/T 9341-2000 Plastics—Determination of flexural properties GB/T 9341-2008 Plastics—Determination of flexural properties GB/T 9352-1988 Plastics—Compression moulding test specimens of thermoplastic materials GB/T 9352-2008 Plastic—Compression moulding of test specimens of thermoplastic materials GB/T 11546.1-2008 Plastic—Determination of creep behaviour—Part 1:Tensile creep GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials—Part 1:General principles and moulding of multipurpose and bar test specimens GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles,and moulding of multipurpose and bar test specimens GB/T 17037.3-2003 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 3:Small plates GB/T 17037.4-2003 Plastic—Injection moulding of test specimens of thermoplastic materials—Part 4:Determination of moulding shrinkage GB/T 19466.1-2004 Plastics—Differential scanning calorimetry(DSC)—Part 1:General principles GB/T 19466.1-2025 Plastics—Differential scanning calorimetry(DSC) method—Part 1:General principles GB/T 19466.2-2004 Plastics—Differential scanning calorimetry(DSC)—Part 2:Determination of glass transition temperature GB/T 19466.2-2025 Plastics—Differential scanning calorimetry(DSC) method—Part 2:Determination of glass transition temperature and step height GB/T 19467.1-2004 Plastics—Acquisition and presentation of comparable single-point data—Part 1:Moulding materials GB/T 20417.1-2008 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 1:Designation system and basis for specifications GB/T 20417.1-2025 Plastics—Acrylonitrile-butadiene-styrene(ABS) moulding and extrusion materials—Part 1:Designation system and basis for specifications GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2:Resistive properties(DC methods)—Volume resistance and volume resistivity GB/T 31838.3-2019 Solid insulating materials—Dielectric and resistive properties—Part 3:Resistive properties(DC methods)—Surface resistance and surface resistivity GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz～10 MHz) GB/T 37426-2019 Plastics—Test specimens GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography GB/T 38271-2025 Plastics—Determination of residual styrene monomer in polystyrene(PS),impact-resistant polystyrene(PS-I),acrylonitrile-butadiene-styrene(ABS) and styrene-acrylonitrile(SAN) resin—Gas chromatography GB/T 39812-2021 Plastics—Preparation of test specimens by machining ISO 8256

Adopt standards

ISO 19062-2:2019

Related Standards

GB/T 6595-1986 Replaced

GB/T 6595-1986 Test method for fish eye count of polypropylene resin

Publish Date: 1986-07-24

GB/T 6598-1986 Active

GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method

Publish Date: 1986-07-24

GB/T 6599-1986 abolished_transferred

GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography

Publish Date: 1986-07-24

GB/T 8330-1987 Replaced

GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state

Publish Date: 1987-11-15

GB/T 8331-1987 Replaced

GB/T 8331-1987 Method for the determination of bulk density of ion exchange resins in wet state

Publish Date: 1987-11-15

GB/T 8324-1987 Replaced

GB/T 8324-1987 Test method for bulk factor of moulding materials

Publish Date: 1987-12-01