GB 13539.4-1992
Replaced
GB/T 15576-2020
Active
National standards
GB/T 15576-2020 Low-voltage reactive power compensation assemblies
GB/T 15576-2020 Low-voltage reactive power compensation assemblies
Price:
$ 93
Basic Information
Standard Code:
GB/T 15576-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Low-voltage distribution electrical equipment
ICS Name:
Fuses and other overload protection devices
Publish Date:
2020-11-19
Implement Date:
2021-06-01
Pages:
30 pages
Scope
This standard specifies the terms and definitions, classification, usage conditions, structural and performance requirements, design verification, and routine inspection of low-voltage complete reactive power compensation devices (hereinafter referred to as the devices).
This standard applies to low-voltage complete reactive power compensation devices with a rated AC voltage of no more than 1,000 V (or 1,140 V) and a frequency of no more than 1,000 Hz.
Development Information
Replace the following standards
Referenced Standards
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7251.8-2020 Low-voltage switchgear and controlgear assemblies—Part 8:General technical requirements for intelligent assembly
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 29312-2012 Low-voltage reactive power compensation switchgear component
IEC 60085
IEC 60216(所有部分)
IEC 60445
GB/T 1094.6-2011 Power transformers—Part 6:Reactors
GB/T 3768-1996 Acoustics—Determination of sound power levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
GB/T 3768-2017 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane
GB/T 4025-2003 Basic and safety principles for man-machine interface, marking and identification Coding principles for indication devices and actuators
GB/T 4025-2010 Basic and safety principles for man-machine interface,marking and identification—Coding principles for indicators and actuators
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5169.5-1997 Fire hazard testing for electric and electronic products Part 2:Test methods Section 2:Needle-flame test
GB/T 5169.5-2008 Fire hazard testing for electric and electronic products—Part 5:Test flames—Needle test method—Apparatus,confirmatory arrangement and guidance
GB/T 5169.5-2020 Fire hazard testing for electric and electronic products—Part 5:Test flames—Needle-flame test method—Apparatus,confirmatory test arrangement and guidance
GB/T 12747.1-2004 Shunt Power capacitors of the self-healing type for a.c.systems having a rated valtage up to and including 1000 V—Part 1:General-Performance,testing and rating-Safety requirements-Guide for installation and operation
GB/T 12747.1-2017 Shunt power capacitors of the self-healing type for a.c.systems having a rated voltage up to and including 1 000 V—Part 1:General—Performance,testing and rating—Safety requirements—Guide for installation and operation
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 16895.21-2011 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 16895.21-2020 Low-voltage electrical installations—Part 4-41:Protection for safety—Protection against electric shock
GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)
GB/T 20138-2023 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)
GB/T 20641-2006 Empty enclosures for low-voltage switchgear and control gear assemblies—General requirements
GB/T 20641-2014 Empty enclosures for low-voltage switchgear and controlgear assemblies—General requirements
JB/T 9663-2013 Low-voltage reactive power automatic compensation controller
GB/T 20641-2025 Empty enclosures for low-voltage switchgear and controlgear assemblies—General requirements
Related Standards
GB 13955-1992
Replaced
GB 13955-1992 Installation and operation of residual current operated protective devices
GB 14285-1993
Replaced
GB 14285-1993 Technical code for relaying protection and security automatic equipment
GB 14287-1993
Replaced
GB 14287-1993 Residual current operated alarm devices for fire prevention
GB 15166.2-1994
Replaced
GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses
GB 15166.3-1994
Replaced