GB/T 20234.1-2011
Replaced
GB/T 20234.1-2015
Replaced
National standards
GB/T 20234.1-2015 Connection set for conductive charging of electric vehicles—Part 1:General requirements
GB/T 20234.1-2015 Connection set for conductive charging of electric vehicles—Part 1:General requirements
Basic Information
Standard Code:
GB/T 20234.1-2015
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Automotive electronics, electrical equipment, and instrumentation
ICS Name:
Other road vehicle devices
Publish Date:
2015-12-28
Implement Date:
2016-01-01
Pages:
15 pages
Scope
This part of GB/T 20234 specifies the definitions, requirements, test methods, and inspection rules for charging connectors used in the conductive charging of electric vehicles.
This part applies to charging connectors used in the conductive charging of electric vehicles, which:
——Have an AC rated voltage not exceeding 690 V, a frequency of 50 Hz, and a rated current not exceeding 250 A;
——Have a DC rated voltage not exceeding 1,000 V and a rated current not exceeding 400 A.
If the power supply interface of the charging connector uses standardized plugs and sockets that comply with GB 2099.1 and GB 1002, this part does not apply to these plugs and sockets.
Note: In this part, "vehicle" refers to electric vehicles that can be externally charged.
Development Information
Same series standard
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 11918.1-2014 Plugs,socket-outlet and couplers for industrial purposes—Part 1:General requirements
GB 1002-1996 Single phase plugs and socket-outlets for household and similar purposes Types、basic parameters and dimensions
GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB/T 1002-2021 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 1002-2024 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements
GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 3956-1997 Conductors of insulated cables
GB/T 3956-2008 Conductors of insulated cables
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 5013.4-1997 Rubber insulated cables of rated voltages up to and including 450/750V—Part 4:Cords and flexible cables
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB 5023.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 1:General requirements
GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements
GB 5023.2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 2:Test methods
GB/T 5023.2-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 2:Test methods
GB 5023.3-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 3:Non-sheathed cables for fixed wiring
GB/T 5023.3-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 3:Non-sheathed cables for fixed wiring
GB 5023.4-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 4:Sheathed cables for fixed wiring
GB/T 5023.4-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 4:Sheathed cables for fixed wiring
GB 5023.5-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 5:Flexible cables (cords)
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB 5023.6-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 6:Lift cables and cables for flexible connection
GB/T 5023.6-2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 6:Lift cables and cables for flexible connections
GB 5023.7-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 7:Flexible cables screened and unscreened with two or more conductors
GB/T 5023.7-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 7:Flexible cables screened and unscreened with two or more conductors
GB/T 18487.1-2001 Electric vehicle conductive charging system—Part 1:General requirements
GB/T 18487.1-2015 Electric vehicle conductive charging system—Part 1:General requirements
GB/T 18487.1-2023 Electric vehicle conductive charging system—Part 1:General requirements
GB/T 19596-2004 Terminology of electric vehicles
GB/T 19596-2017 Terminology of electric vehicles
Related Standards
GB/T 20234.2-2011
Replaced
GB/T 20234.2-2011 Connection set for conductive charging of electric vehicles—Part 2:AC charging coupler
GB/T 20234.3-2011
Replaced
GB/T 20234.3-2011 Connection set for conductive charging of electric vehicles—Part 3:DC charging coupler
GB/T 29316-2012
Active
GB/T 29316-2012 Power quality requirements for electric vehicle charging/battery swap infrastructure
GB/T 29317-2012
Replaced
GB/T 29317-2012 Terminology of electric vehicle charging/battery swap infrastructure
GB/T 29318-2012
Replaced