GB/T 17213.1-1998
Replaced
GB/T 12229-2025
Active
National standards
GB/T 12229-2025 General purpose industrial valves—Technical specification for carbon steel castings
GB/T 12229-2025 General purpose industrial valves—Technical specification for carbon steel castings
Basic Information
Standard Code:
GB/T 12229-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nValve
ICS Name:
\nValve Comprehensive
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国阀门标准化技术委员会(SAC/TC 188)
Pages:
16 pages
Scope
本文件规定了通用阀门用碳素钢铸件的技术要求、试验方法、标识和质量证明书及附加要求。
本文件适用于通用阀门的承压碳素钢铸件的设计、生产与检验,非承压碳素钢铸件参照使用。
Development Information
Drafting Units:
江苏万恒新材料科技有限公司、合肥通用机械研究院有限公司、中国神华煤制油化工有限公司鄂尔多斯煤制油分公司、武汉华科能源环境科技股份有限公司、江苏腾龙石化机械有限公司、泰钢合金(中山)有限公司、国家管网集团西南管道有限责任公司、浙江石化阀门有限公司、江苏江沅机械有限公司、江苏明通福路流体控制设备有限公司、盐城奥凯明通阀门有限公司、成都成高阀门股份有限公司、浙江贝尔控制阀门有限公司、合肥通安工程机械设备监理有限公司、天津贝特尔流体控制阀门有限公司、上海亚奥阀门有限公司、浙江力诺流体控制科技股份有限公司、山东天力机械铸造有限公司、安徽省白湖阀门厂有限责任公司、江苏恒达机械制造有限公司、浙江摩恩达阀门有限公司、四川中油乐仪能源装备制造股份有限公司、北科阀门集团有限公司、丹佛斯(天津)有限公司、阿司米阀门有限公司、氟络塞尔特种阀门(苏州)有限公司
Drafting Persons:
曹峤、靳淑军、胡庆斌、张传虎、马超、戴义明、孙志标、张焕东、王忠淼、韩雪峰、黄静生、王鑫、郑煜川、林峰、周钦凯、李东明、刘丽艳、陈小林、杨智森、黄杰、戴陇宁、叶曼凯、彭国军、沈文中、王志梅、郑瑶瑶、袁天发
Replace the following standards
Referenced Standards
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 222-2006 Permissible tolerances for chemical composition of steel products
GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition
GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.6-1994 Methods for chemical analysis of iron, steel and alloy—The neutralization titrimetric method for the determination of boron content
GB/T 223.6-2025 Iron,steel and alloy—Determination of boron content—Neutralization titrimetric method and spectrophotometric method
GB/T 223.7-2002 Iron powder—Determination of iron content—Potassium dichromate titration method
GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.10-2000 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
GB/T 223.12-1991 Methods for chemical analysis of iron, steel and alloy—The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.16-1991 Methods for chemical analysis of iron, steel and alloy—The chromotropic acid photometric method for the determination of titanium content
GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.21-1994 Methods for chemical analysis of iron, steel and alloy The 5-Cl-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22-1994 Methods for chemical analysis of iron, steel and alloy The nitroso-R-salt spectrophotometric method for the determination of cobalt content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.24-1994 Methods for chemical analysis of iron, steel and alloy The extraction separation—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.27-1994 Methods for chemical analysis of iron, steel and alloy The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.30-1994 Methods for chemical analysis of iron, steel and alloy The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.31-1994 Methods for chemical analysis of iron, steel and alloy The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.31-2026 Iron, steel and alloy—Determination of arsenic content—Spectrophotometric method and iodimetric method
GB/T 223.32-1994 Methods for chemical analysis of iron, steel and alloy The hypophosphite reduction-iodimetric method for the determination of arsenic content
GB/T 223.33-1994 Methods for chemical analysis of iron, steel and alloy The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy—The determination of hydrochloric acid-insoluble content of iron powders
GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation
GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T 223.38-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method)
GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
GB/T 6414-1999 Castings—System of dimensional tolerances and machining allowances
GB/T 6414-2017 Castings—Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 9452-2023 Test method for qualified work zone of heat treatment furnace
GB/T 11351-1989 Mass tolerances for castings
GB/T 11351-2017 Mass tolerances of casting
GB/T 13927-1992 Pressure testing for general purpose valves
GB/T 13927-2008 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 15056-2017 Casting surface roughness—Appraising method
GB/T 15169-1994 Approval testing of manual welders fusion welding-steel
GB/T 15169-2003 Qualification test of welders—Fusion welding for steels
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
GB/T 26480-2011 Valve inspection and testing
GB/T 40800-2021 Specification and qualification of welding procedures for production welding of steel castings
GB/T 40805-2021 Steel castings—General technical delivery requirements
JB/T 7927-2014 The appearance quality requirements for valve cast steel components
JB/T 7927-1999 The appearance quality requirements for valve cast steel parts
Related Standards
GB/T 17213.5-1998
Replaced
GB/T 17213.5-1998 Industrial-process control valves—Part 5:Marking
GB/T 17213.7-1998
Replaced
GB/T 17213.7-1998 Industrial-process control valves—Part 7:Control valve data sheet
GB/T 17213.8-1998
Replaced
GB/T 17213.8-1998 Industrial-process control valves—Part 8:Noise considerations Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T 12222-2005
Replaced
GB/T 12222-2005 Multi-turn valve actuator attachments
GB/T 12223-2005
Replaced