GB/T 4229-1984
Replaced
GB/T 912-1989
Replaced
National standards
GB/T 912-1989 Hot-rolled plain carbon and low alloy structural steel sheets and strips
GB/T 912-1989 Hot-rolled plain carbon and low alloy structural steel sheets and strips
Basic Information
Standard Code:
GB/T 912-1989
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nSteel plates and steel strips
ICS Name:
Flat steel and semi-finished products
Publish Date:
1989-03-31
Implement Date:
1990-01-01
Publisher:
The National Technical Supervision Bureau
Pages:
4 pages
Development Information
Drafting Units:
Benxi Steel Company and the General Research Institute of Information and Standards of the Ministry of Metallurgical Industry
Drafting Persons:
Gao Zhaozhong and Tang Yifan
Replace the following standards
GB 912-1982
Superseded by the following standards
Referenced Standards
GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.41-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
GB/T 223.42-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-brom opyrogallol red photometric method for the determination of tantalum content
GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.45-1994 Methods for chemical analysis of iron, steel and alloy—The cupral separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
GB/T 223.46-1989 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of magnesium content
GB/T 223.47-1994 Methods for chemical analysis of iron, steel and alloy—The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
GB/T 223.48-1985 Methods for chemical analysis of iron, steel and alloy—The semixylenol orange photometric method for the determination of bismuth content
GB/T 223.49-1994 Methods for chemical analysis of iron, steel and alloy—Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
GB/T 223.50-1994 Methods for chemical analysis of iron, steel and alloy—The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.51-1987 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
GB/T 223.52-1987 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
GB/T 223.53-1987 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.54-1987 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrophotometric method for the determination of nickel content
GB/T 223.54-2022 Iron,steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
GB 223.57-1989 The method of chemical analysis for steel and alloys: Extraction separation-adsorption catalytic polarography for the determination of cadmium
GB/T 223.58-1987 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method
GB/T 223.61-1988 Methods for chemical analysis of iron,steel and alloy—The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content
GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method
GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.65-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method for the determination of cobalt content
GB/T 223.65-2012 Steel,iron and alloy—Determination of cobalt content—Flame atomic absorption spectrometric method
GB/T 223.66-1989 Methods for chemical analysis of iron, steel and alloy—The thiocyanate chlorpromazine hydrochloride—chloro form extraction photometric method for the determination of tungsten content
GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.68-1997 Methods for chemical analysis of iron,steel and alloy The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69-1997 Methods for chemical analysis of iron,steel and alloy The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 223.70-1989 Methods for chemical analysis of iron, steel and alloy—The o-phenanthroline spectrophotometric method for the determination of iron content
GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method
GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.73-1991 Methods for chemical analysis of iron, steel and alloy—The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method
GB/T 223.74-1997 Methods for chemical analysis of iron,steel and alloy—The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 223.77-1994 Methods for chemical analysis of iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of calcium content
GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy—Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79-2007 Iron and steel—Determination of multi-element contents—X-ray fluorescence spectrometry(Routine method)
GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81-2007 Iron,steel and alloy—Determination of total aluminum and total boron contents—Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82-2007 Steel and iron—Determination of hydrogen content—Inert gas impulse fusion heat conductivity method
GB/T 223.82-2018 Steel and iron—Determination of hydrogen content—Thermal conductivity/infrared method after fusion under inert gas
GB/T 223.83-2009 Steel and iron—Determination of high sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.84-2009 Steel and iron—Determination of titanium content—Diantipyrylmethane spectrophotometric method
GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace
GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace
GB/T 223.87-2018 Iron, steel and alloy—Determination of calcium and magnesium—Inductively coupled plasma mass spectrometric method
GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
GB/T 223.90-2021 Iron,steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223.91-2021 Iron,steel and alloy—Determination of copper—2,2′-Biquinoline spectrophotometric method
GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry
GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature
GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium
GB/T 232-1999 Metallic materials—Bend test
GB/T 232-2010 Metallic materials—Bend test
GB/T 232-2024 Metallic materials—Bend testing method
GB/T 247-1997 General rule of acceptance, package, mark and certification for steel plates(sheets) and strips
GB/T 247-2008 General rule of package,mark and certification for steel plates(sheets)and strips
GB/T 247-2025 General rules of package, mark and certification for steel plate, sheet and strip
GB/T 700-1988 Carbon structural steels
GB/T 700-2006 Carbon structural steels
GB/T 709-1988 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
GB/T 709-2006 Dimension,shape,weight and tolerances for hot-rolled steel plates and sheets
GB/T 709-2019 Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB 6397
Related Standards
GB/T 5212-1985
Active
GB/T 5212-1985 Hot rolled silicon steel sheets for electrical grade
GB/T 5313-1985
Replaced
GB/T 5313-1985 Steel plate with through-thickness characteristics
GB/T 704-1988
Replaced
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 2518-1988
Replaced
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 3274-1988
Replaced